WATERCOOL RTX 6000 ADA Heatkiller Inox Pro Instruction Manual
- August 5, 2024
- WATERCOOL
Table of Contents
WATERCOOL RTX 6000 ADA Heatkiller Inox Pro
TOOLS REQUIRED FOR ASSEMBLY AND MAINTENANCE
Tools
- Torx TX8
Mounting material
- 4x
M2,5×8
- 4x
M2,5
WARNINGS Please read the instructions carefully before starting the assembly. Failure to follow the instructions or an incorrect assembly can cause permanent damage to your hardware. The assembly is done at your own risk.
Modifications to the graphics card (such as removing the original air cooler) may affect or completely void the graphics card warranty.
We recommend demineralized or deionized water (distilled water) with a
suitable corrosion inhibitor as coolant.
We have had good experiences with Mayhem‘s XT-1, Innovatek Protect or
Aquacomputer Double Protect.
PREPARATION OF THE GRAPHICS CARD
DISMANTLING THE AIR COOLER / BACKPLATE
Remove the air cooler and the backplate. Screws on the slot bracket may have to be removed for this.
Afterwards, clean all contact surfaces.
INSTALLATION OF THE WATER BLOCK
PREPARATION OF THE WATER BLOCK
Required tools
- Torx TX8
The pre-mounted backplate needs to be removed in the first step. therefore all screws of the backplate must be loosened. The red plastic washers are only used for transport protection and must be removed.
THERMAL PAD PLACEMENT
The heat conducting pads must be positioned according to the following drawings. Apply a sufficient amount of thermal paste to the GPU area.
MOUNTING THE WATER BLOCK
Required tools
-
Torx TX8
-
4x
M2,5×8
- 4x
M2,5
The cooler has to be mounted according to the following drawing
Installation Of The Water Block
Required tools
-
Torx TX8
-
1x
M2,5×6
The power connector has to be assembled according to the following drawing
MOUNTING THE BACKPLATE AND SLOT COVER
Required tools
-
Torx TX8
-
6x
M2,5×10
- 2x
M2,5×12
The backplate has to be assembled according to the following drawing.
DIMENSIONS OF THE COOLER
Customer Support
CONTACT
Watercool GmbH
Zum Mevenbruch 6 | 17192 Waren (Müritz) | Germany
support@watercool.de