electri Center ECCS1 Ground Bar Collar Strap Instruction Manual
- June 8, 2024
- electri Center
Table of Contents
electri Center ECCS1 Ground Bar Collar Strap
WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov
DANGER
Hazardous Voltage.
Will cause death, serious injury or substantial property damage.
Turn off the power supply of this equipment before working inside.
NOTE: This instruction outlines the recommended installation procedure.
- Turn off and lock off the power supplying this equipment before working inside.
- Loosen 2 screws on the ground bar at the desired location of the collar strap.
- Insert the feet of the collar strap into a ground bar and tighten the screws in Step 2 to 35 lb.-ins.
Collar Strap
- Wire Range: #12 – 2/0 AWG
- Tightening Torque: 45 lb.-ins.
Specifications
| Property | Specification |
|---|---|
| Catalog Number | ECCS1 |
| Wire Range | #12 – 2/0 AWG |
| For Use On | “GB” type ground bars only |
| Tightening Torque | 45 lb.-ins. |
FAQ
- What is the tightening torque for the ECCS1 collar strap?
- The tightening torque for the ECCS1 collar strap is 45 lb.-ins.
- Can ECCS1 be used on any type of ground bars?
- No, ECCS1 is for use on “GB” type ground bars only.
- What is the wire range compatibility for the ECCS1?
- The ECCS1 is compatible with wire sizes ranging from #12 to 2/0 AWG.
2/0 Collar Strap
- Wire Range: #12 – 2/0 AWG
- For use on “GB” type ground bars only
- Same As: CS1 ECS1
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
INSTALLATION INSTRUCTIONS
DANGER
- Hazardous Voltage.
- Will cause death, serious injury or substantial property damage.
- Turn off the power supply of this equipment before working inside.
Collar Strap
- Wire Range: #12 – 2/0 AWG
- Tightening Torque: 45 lb.-ins.
SAFETY INSTRUCTIONS
NOTE: This instruction outlines the recommended installation procedure.
- Turn off and lock off the power supplying this equipment before working inside.
- Loosen 2 screws on the ground bar at a desired location of the collar strap.
- Insert the feet of the collar strap into the ground bar and tighten the screws in Step 2 to 35 lb.-ins.
© 2022 Copyright Siemens Industry, Inc.
Siemens Industry, Inc. Norcross, Georgia U.S.A. 4810401 Rev.03 Assembled in
Mexico
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>