ATLONA AT-OME-RX11 Omega 4K UHD Scaler for HDBaseT and HDMI Installation Guide

ATLONA AT-OME-RX11 Omega 4K UHD Scaler for HDBaseT and HDMI

The Atlona AT-OME-RX11 is an HDBaseT receiver for video up to 4K/60 4:2:0, plus embedded audio, control, and Ethernet over distances up to 330 feet (100 meters). Part of the Omega™ Series of integration products for modern AV communications and collaboration, the OME-RX11 is HDCP 2.2 compliant and receives RS-232 and IP control signals. Additionally, this receiver features two-channel audio de-embedding to a balanced analog audio output. The OME-RX11 is locally powered, and can deliver Power over Ethernet (PoE) over HDBaseT to an Atlona Omega Series, HDVS-200 Series, or AT-UHD-EX-100CE-TX-PD transmitter.

Package Contents

• 1 x AT-OME-RX11
• 1 x Captive screw connector, 5-pin
• 1 x Captive screw connector, 3-pin
• 4 x Mounting screws
• 1 x Pair rack mount ears
• 1 x 24V DC power supply
• 1 x IEC power cord
• 1 x Installation Guide

IMPORTANT: Visit https://atlona.com/product/AT-OME-RX11 for the latest firmware updates and User Manual.

Installation Guide

Panel Descriptions

1. LAN
   Connect an Ethernet cable to this port to pass Ethernet to a local device from a transmitter or from a local network switch to a compatible transmitter.

2. FW
   Connect to a computer using a mini USB to USB A cable (not included).

3. PWR LED
   Illuminates green when receiving power.

4. LINK LED
   Illuminates yellow when receiving signal from the HDBaseT input port.

5. DC 24V
   Connect the included DC 24V power supply to this port.

6. RS-232
   Bi-directional port for pass through display control from/to a compatible transmitter.

7. AUDIO OUT
   Connect to an audio DSP, amplifier, or other audio distribution devices.

8. HDBaseT OUT
   Connect a compatible HDBaseT transmitter to this port.

9. HDMI IN
   Connect an HDMI cable from here to an HDMI source.

RS-232
A 3-pin captive screw connector has been included for RS-232.

Pin out will be determined by the RS-232 cable and connect as RX (receive), TX (transmit) and (Ground).

Audio
Deembeds audio and sends to a connected audio DSP, amplifier, or other audio distribution devices.

Use a jumper between the negative and ground pins when using an unbalanced connection.

Mounting Instructions

The AT-OME-RX11 includes two mounting brackets and four mounting screws, which can be used to attach the units to any flat surface.

1. Remove the top 2 case screws on the side of the unit.
2. Align the mounting brackets to the side of the units.
3. Use the previously removed case screws to secure the mounting bracket to the enclosure.
4. Repeat the steps for the other side of the unit.
5. Mount the unit using the oval-shaped holes, on each mounting bracket. If using a drywall surface, a #6 drywall screw is recommended.
   NOTE: Mounting brackets can also be inverted to mount the unit under a table or other flat surface.

Cable Recommendation Guidelines
Refer to the tables below for recommended cabling when using Altona products with HDBaseT. The green bars indicate the signal quality when using each type of cable. Higher-quality signals are represented by more bars.

IMPORTANT: Stranded or patch cables are not recommended due to performance issues.

Use of a TIA/EIA 568B termination is recommended for optimal performance.

Installation

1. Connect a compatible HDBaseT transmitter (e.g. AT-OME-ST31 or AT-OME-EX-TX) to the HDBaseT input port using a category cable.
2. Connect an HDMI cable from the output port to an HDMI display.
3. Optional* Connect the 2CH analog AUDIO OUT port to a DSP, or audio amplifier.
4. Optional* Connect to the 3-pin captive screw RS-232 port to control the display or send commands back to the compatible transmitter over HDBaseT.
5. Optional* Connect an Ethernet cable to the LAN port to pass or receive Ethernet. This can be connected to a display if receiving Ethernet from a compatible transmitter or to a network switch if sending Ethernet to a compatible transmitter.
6. Connect the included DC 24V power supply to the power port.
7. Connect the included IEC power cord from the power supply to a compatible power outlet.

Updating the Firmware

Requirements:

• AT-OME-RX11
• Firmware file
• Computer running Windows
• USB-A to USB mini-B cable

NOTE: The update process can take up to five minutes to complete.

1. Disconnect power from the AT-OME-RX11.
2. Connect a USB-A to USB mini-B cable between the PC and the FW port on the AT-OME-RX11.
3. Connect the included power supply to the AT-OME-RX11.
4. The USB UPDATE folder will be displayed. If this folder is not displayed, automatically, select the USB UPDATE drive from Windows Explorer.
5. Delete all files from the USB UPDATE drive, if any are present.
6. Drag-and-drop the firmware file to the drive.
7. The PWR LED indicator, on the front panel, will flash green while the AT-OME-RX11 is being updated. Do not disconnect the USB cable during the update process. When the PWR LED stops flashing and is solid green, the update process will be complete.
8. Disconnect the USB cable from the AT-OME-RX11.

Warranty

To view the product warranty, use the following link or QR code: https://atlona.com/warranty/.

English Declaration of Conformity
The English version can be found under the resources tab at: https://atlona.com/product/at-ome-rx11/.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI licensing Administrator, Inc.

atlona.com • 408.962.0515 • 41.43.508.4321

© 2022 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners. Pricing, specifications and availability subject to change without notice. Actual products, product images, and online product images may vary from images shown here.

References

• Atlona® AV Solutions - Commercial & Residential
• HDBaseT Receiver for HDMI with Audio - Atlona® AV Solutions - Commercial & Residential
• HDBaseT Receiver for HDMI with Audio - Atlona® AV Solutions - Commercial & Residential
• Warranty - Atlona® AV Solutions – Commercial & Education

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>