WPL RC E-1 Tracked Vehicle I Metal Track Installation Guide
- June 13, 2024
- WPL RC
Table of Contents
WPL RC E-1 Tracked Vehicle I Metal Track
Parts List
-
Metal Track xl34
-
Rubber Pad x 134
-
Track pins x 134
-
Front Drive Sprocket Pins x22
-
Torsion Spring *1
-
Front Drive Sproket *2
Installation
-
Use a plier or similar tool to pull both left and right tabs through the metal track fully
-
Trim the excess material
Example completed for l piece
-
Use the track pin to connect all metal tracks together to complete the whole set
-
Metal track assembly completed Same procedure for the other side
-
Remove the original front drive sprocket and plastic track
-
Align the inner and outer front drive sprockets with the front drive sprocket pins and join them together
-
Install the new drive track sprocket and metal track Same procedure for the other side
-
Remove the bottom panel to change the torsion spring
-
For non-metal track version
-
For metal track version
Note Observe which torsion spring to us
- Metal Track upgrade completed
WPL RC Official Store : www.wpl-rc.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>