ATLONA AT-CAP-SP100 Captivate USB Bluetooth Speaker Phone Installation Guide

: June 1, 2024
: ATLONA

Table of Contents

ATLONA AT-CAP-SP100 Captivate USB Bluetooth Speaker Phone
INTRODUCTION
Package Contents
Panel Descriptions
Mounting Instructions
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ATLONA AT-CAP-SP100 Captivate USB Bluetooth Speaker Phone

INTRODUCTION

The Atlona Captivate™ AT-CAP-SP100 is a USB / Bluetooth® speakerphone for use with popular video conferencing and unified communications platforms including Zoom™ and Microsoft® Teams. The CAP-SP100 provides microphone and speaker audio in a single elegant enclosure suitable for meeting rooms as well as executive and home office environments. USB, Bluetooth, and analog audio connectivity ensurecompatibility with a wide array of computers, laptops, and mobile devices. The CAP-SP100 features a 6-element microphone array for 360-degree voice capture as well as the ability to concentrate audio pickup on individual talkers while suppressing background noises. Sophisticated audio processing optimized for voice intelligibility allows meeting participants to be heard loud and clear. The included battery allows the speakerphone to operate for up to 8 hours without a power connection. The CAP-SP100 speakerphone is an ideal addition to video conferencing system designs that utilize our USB cameras as well as Omega™ Series switching, extension, and video processing solutions.

Package Contents

1 x AT-CAP-SP100
1 x AUX Cable
1 x USB-C to USB A Cable
1 x Installation Guide

IMPORTANT: Visit https://atlona.com/product/at-cap-sp100/ for the latest firmware updates and Installation Guide.

Panel Descriptions

Volume / Power Indicators
While the unit is on, the indicators will display the volume level when the volume buttons are pressed. Quickly press the power button to have the LEDs display the power level. LEDs will display green for power.
Volume Buttons
Use the plus and minus buttons to increase or decrease the volume level.
Answer/Hang up Button
Select this button to accept incoming calls. When in a call press to hang up the call.
NOTE: Some apps or devices may require the button to be held for up to 5 seconds to hang up.
Audio In/Out Port
Connect the included AUX cable from this port to a PC or a second unit for audio chaining (using AT-CAP-SP100-CBL or AT-CAP-SP100-CBL-5M).
5 5V 2A USB-C Port
Connect the included USB-C to USB A cable from this port to either a PC or USB power strip. This port will pass through audio and also be used for power.
Bluetooth Button
Press and hold the button for 2 seconds to turn Bluetooth on and off. When Bluetooth is connected (LED will be blue), hold the button until it is disconnected.
MIC Mute/Unmute
Press this button to mute and unmute the microphone. The LED will turn red when muted.
Power Button
Press and hold the button to turn the unit on and off. The unit will beep when turning on or off. This button can also be quickly pressed to display the power level.

Mounting Instructions

Secure Mounting sold separately

An optional secure mount (AT-CAP-SP100-MNT) can be purchased through atlona.com.

Remove the screw and detachable lip from the front of the secure mount.
Secure the unit to the preferred surface (e.g. table top). There are two options for securing it to the table:
- Run the included two bolts and nuts (included with AT-CAP-SP100-MNT) or two wood screws (not included) through the mount holes and screw them into the table/ surface.
- Remove the paper from the top of the included adhesive ring (included with AT-CAPSP100- MNT) and press it firmly to the bottom of the mount. Once done, remove the paper from the bottom of the adhesive ring and press the secure mount (adhesive side down) onto the table/surface for 15 seconds to ensure the mount is secure.
Slide the AT-CAP-SP100 onto the mount, ensuring the bottom of the unit is under the two lips of the mount.
Attach the previously removed detachable lip with the screw from the first step. This will secure the unit to the mount.

Connection Instructions

Press the power button until the unit turns on. A beep will play to indicate the power has turned on.
Connect the unit to the audio conference device (e.g. PC).
- Bluetooth – Bluetooth will start flashing blue when powered on to connect. If connected through USB-C to a computer, the bluetooth button should be pressed and held for 5 seconds to enable pairing. Go to the conference device and select the AT-CAPSP100 from the Bluetooth device list.
- AUX – Connect the AT-CAP-SP100 to the audio conference device using the included AUX cable. The device should auto-detect the speakerphone.
- USB – Connect the AT-CAP-SP100 to the audio conference device using the included USB-C to USB A cable. The device should auto-detect the unit.
  NOTE: Mute status sync on Microsoft Teams will only display when the AT- CAP-SP100 is connected via USB.
Select the AT-CAP-SP100 as the default audio device for input and playback.

Power
The AT-CAP-SP100’s internal battery will come with a small power charge. The unit will need to be charged fully before use.

If using the unit with the USB-C to USB A cable, it will charge while in use and nothing additional will be needed.
- NOTE: Certain devices will send data over USB to the AT-CAP-SP100 when powered down, this will cause the unit to power back on.
If using the unit with the AUX cable or over Bluetooth, the device can be powered through the included USB-C to USB-A cable or using Qi wireless charging.

Qi Charging
There are many types of Qi chargers. To work with the AT-CAP-SP100, it must provide 7.5W for power. Atlona has tested some chargers to ensure compatibility. See the table below for tested Qi chargers:

Compatible Chargers

Anker PowerWave II Pad| Apple MagSafe Charger
Anker 313 Wireless Charger Pad| Logitech Power Pad (950-000010)

Cascading

A cascade cable (AT-CAP-SP100-CBL or AT-CAP-SP100-CBL-5M) can be purchased through atlona.com to allow two AT-CAP-SP100s to be connected to one another, enabling a larger conference area to be covered. Now that both units are on and connected, any button presses on either unit will be mirrored on the other unit.

NOTE: Both units are powered separately. The cascade cable will not pass power between the units.

Connect one end of the cascade cable to the AUX port of the first unit and the second end to the AUX of the second unit.
NOTE: For fixed installations, the AT-CAP-SP100-CBL-5M is the best option for audio cascading. If the units may move, the AT-CAP-SP100-CBL is the best option for cascading.
Power on the first unit and connect it to the conference device. The connection can be either USB or Bluetooth, but the AUX port will be unavailable while cascading.
Select the unit as the default audio device for audio input and playback.
Power on the second unit. It will detect the connection to the first unit and pair to share controls.

Now that both units are on and connected, any button presses on either unit will be mirrored on the other unit.

NOTE: The mute status of the secondary device will not display in Microsoft Teams. The secondary AT-CAP-SP100 will display the correct status light on the unit.

Warranty

To view the product warranty, use the following link or QR code: https://atlona.com/warranty/.

English Declaration of Conformity

The English version can be found under the resources tab at: https://atlona.com/product/at-cap-sp100/.

Chinese Declaration of Conformity

https://atlona.com/about-us/china-rohs/.

2022 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners. Pricing, specifications and availability subject to change without notice. Actual products, product images, and online product images may vary from the images shown here.