ATLONA HDVS-CAM USB 2.0 PTZ Camera Installation Guide

ATLONA HDVS-CAM USB 2.0 PTZ Camera

INTRODUCTION

The Atlona HDVS-CAM is an enterprise-grade PTZ camera designed for use with the AT­
UHD-HDVS-300-KIT in soft codec conferencing applications. It features a USB interface for video and camera control. The HDVS-CAM seamlessly integrates with the HDVS-300-KIT for a complete, automated conferencing system that includes AV and USB extension, plus automatic input selection and display powering when a PC is connected. The HDVS-CAM delivers high performance, professional-quality imaging with video resolutions up to 1080p @ 30 Hz, as well as fast and accurate auto-focusing, and a fast yet quiet pan and tilt mechanism. This PTZ camera is ideal for a wide range of small to medium-sized meeting spaces, classrooms, and training rooms. The camera is available in both black or white.

Package Contents

• 1 x AT-HDVS-CAM or AT-HDVS-CAM-W
• 1 x Wall mounting plate
• 1 x 1/4 20OUNC screws
• 1 x IR Remote Control
• 1 x USB A cable
• 1 x VISCA to RS-232 DB-9 adapter
• 2 x AAA battery
• 1 x Installation Guide

Panel Descriptions

1. RS-232
   Connect included VISCA to RS-232 adapter here to control the camera with a third party software or hardware controller.

2. USB
   Connect USS A cable to this port from the USB port of the AT-UHD-HDVS-300-RX.

3. LAN
   Connect to a network switch to control the unit via TCP/IP or webGUI.

4. DC12V
   Connect the included 12V power supply to this port.

Mounting Instructions

The HDVS-CAM has two installation options, wall mount {included) and ceiling mount (purchased separately).

Wall Mount Installation
The installed HDVS-CAM, 4 M6 swelling bolts, 1 1/4 20UNC bolt, 4 M6 nuts & shims, the included wall mount bracket, and the HDVS-CAM are needed.

1. Install the M6 swelling bolts in a rectangular pattern on the wall, 100 mm wide and 50 mm high.
2. Attached the wall mount bracket onto the wall, by placing them on the M6 swelling bolts and securing it with the M6 nuts and shims.
3. Once the wall mount bracket is secure on the wall, place the camera on the top of the wall mount bracket and secure it with the 1/4 20UNC bolt.

Ceiling Mount Installation
To install the HDVS-CAM, 4 PA3X30 self-tapping screws, 4 PM3X6 screws, 4 screw stoppers, 1 1/4 20UNC screw, the optional ceiling upper and lower covering plates, and the HDVS-CAM are needed.

1. Install the 4 screw stoppers in the ceiling.
2. Connect the upper ceiling covering plate to the screw stoppers using the PA3X30 self­tapping screws.
3. Connect the lower ceiling covering plate to the bottom of the HDVS-CAM using the 1/4 20UNC screw.
4. Mount the lower ceiling covering plate to the upper ceiling plate using 3 PM3X6 bolts.

NOTE : The camera picture will need to be inverted for video to be viewed correctly. View the HDVS-CAM manual for instructions on how to invert video.

Installation

1. Connect the Ethernet cable to the LAN port on the back of the HDVS-CAM.
2. Connect the USB cable to the AT-UHD-HDVS-300-RX.
3. Optional Connect the Visca to RS-232 cable to the Visca port for RS-232 control.
4. Connect the DC 12V power cable to the unit.

WebGUI
The HDVS-CAM includes a built-in web GUI, which allows easy management and control of all features. Follow the instructions below to access the web GUI.

1. Use an IP scanner to determine the IP address of the HDVS-CAM.

2. Launch a web browser and enter the IP address of the unit.

3. The HDVS-CAM Login page will be displayed.

4. Enter the following information on the Login page.
   Login:
   root
   Password:
   Atlona

5. Click the Login button.

Connection Diagram

Troubleshooting

References

• Atlona® AV Solutions - Commercial & Residential

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>