GREE YAP1F IR Remote Control User Guide
- June 9, 2024
- Gree
Table of Contents
GREE YAP1F IR Remote Control
Installer: DO NOT THROW AWAY! Provide this guide to the end-user with your Contact Card attached to the back.
ICONS DISPLAYED
NOTE: Some functions not available on all models. Please read the complete owner’s manual carefully before operation.
BUTTON FUNCTION
SYSTEM MAINTENANCE
CLEAN INDOOR UNIT’S AIR FILTER 1 X MONTH
Save energy by preventing indoor coils from being plugged with dirt and lint.
To remove the filter, gently push forward on the handle tabs, then lift the
filter out of place. Rinse or vacuum – do not scrub filter with a brush or
place in the dishwasher. Damage could occur.
AUTO CLEAN FUNCTION, INDOOR UNIT
Under unit OFF status, hold “MODE” and “FAN” buttons simultaneously for 5s to
turn Auto Cleaning on or off. When Auto Clean is on the indoor unit displays
“CL” and the unit will heat up and cool quickly. You may hear the sound of
flowing liquid or thermal expansion or contraction. Make sure the room is well
ventilated at this time as the unit may blow cool or warm air, this is normal.
FAQs
-
Why does the fan continue to run even when the unit is not cooling or heating?
To maintain consistent temperatures and minimize energy-loss from constant starts & stops, the fan keeps airflowing past the sensor. -
What temperature is displayed on the remote controller?
The remote always displays your desired indoor temperature. (You may view current indoor temperatures, as well as desired temperature, on the indoor unit’s Front Panel Display.) -
How can I operate the unit without the remote?
Lift the front panel section on the indoor unit and locate the AUX button on the right-hand side. Press the button to turn the unit ON or OFF. (Not all functions will be available.) -
How can I change the temperature display from Celsius to Fahrenheit?
Turn the unit OFF, then press “ ” and “MODE” buttons on the remote simultaneously to switch between °C and °F .
SERVICES
For 6 month servicing, please call the installing contractor.
Installer: Attach your business card here.
For Additional Owner Information, scan QR Code.
For more information, visit GREECOMFORT.COM
Specifications are subject to change without notice. Manufacturer reserves the
right to discontinue, or change at any time, specifications, or designs
without notice or without incurring obligations. ©2022. AII rights reserved.