GREE 4LIV30HP230V1AH Heat Pump System Owner’s Manual
- June 1, 2024
- Gree
Table of Contents
GREE 4LIV30HP230V1AH Heat Pump System
Specifications:
- System Type: HEAT PUMP
- Cooling Performance: 7780 – 35500 Btu/h
- Heating Performance: 17500 Btu/h
- SEER: 20.0
- EER: 11.3
- HSPF: 8.5
- Cooling Temperature Range: -4°F to 115°F
- Refrigerant Type: R410A
- Indoor Unit Air Flow: 44.1 – 54.0 CFM
- Sound Pressure Level (Indoor Unit): 62 dB(A)
- Dehumidification: 3.4 pt/hr
Product Usage Instructions
Indoor Unit Installation:
Follow these steps to install the indoor unit:
- Ensure minimum clearance space to the ceiling, wall, and floor as specified.
- Mount the indoor unit securely according to the provided dimensions.
- Connect the refrigerant piping and electrical wiring following the manufacturer’s guidelines.
Outdoor Unit Installation:
For the outdoor unit installation, follow these instructions:
- Provide adequate clearance space around the outdoor unit as per the specifications.
- Install the outdoor unit on a stable surface with proper elevation considerations.
- Connect the refrigerant piping and electrical supply to the outdoor unit.
Operation:
To operate the system:
- Turn on the power supply within the specified voltage range.
- Select the desired mode (cooling or heating) on the control panel.
- Adjust the temperature settings as needed.
Frequently Asked Questions
- Q: Can I install this system myself?
- A: It is recommended to hire a professional HVAC technician for installation to ensure proper setup and performance.
- Q: What is the refrigerant type used in this system?
- A: The system uses R410A refrigerant for efficient cooling and heating.
- Q: What is the warranty period for this product?
- A: Please refer to the warranty information provided by the manufacturer for details on the warranty period.
SPECIFICATIONS
FEATURES & FUNCTIONS SUMMARY
- SYSTEM FEATURES
- Inverter Type G10
- Ultra Low-Frequency Torque Control Yes
- Power Factor Correction Yes
- Compressor Type High-Efficiency Rotary
- Refrigerant Type R410A
- Basepan With Electric Heater Yes
- Compressor With Electric Heater Yes
- Outdoor Fin Coating (Color:Blue) Acrylic-Resin/Anti-Corrosive
- Intelligent Defrosting Yes
- Force Defrosting Yes
- Intelligent Preheating Yes
- Low Voltage Startup Yes
- Memory/Power Failure Recovery Yes
- Self Diagnosis Yes
- Wired Controller Interface (XE71) Yes
- WiFi Included Yes
- Indoor Fan Type Crossflow
- Multi Fan Speeds 4 Speeds
- Indoor Unit Display Yes
- Auxiliary Electrical Heater No
- Ventilation (Outdoor Air) No
REMOTE CONTROLLER FUNCTIONS
- Auto Mode Yes
- Auto Fan Yes
- Manual Horizontal Swing Yes
- Auto Swing (Vertical Auto Swing) Yes
- Clock on Remote Controller Yes
- Dry Mode Yes
- Dry Anti-Mildew (X-Fan) Mode Yes
- Energy Saving Mode Yes
- Dirty Filter Alert No
- I Feel Function Yes
- Lock on Remote Controller Yes
- Quiet Mode No
- Room Temperature Display Yes
- Sleep Mode Yes
- Timer Mode Yes
- Turbo Mode Yes
- Display On/Off Control Yes
- Freeze Guard Mode (46°F) Yes
- Display On/Off Control Yes
DIMENSIONS
INDOOR UNIT
Unit: inch
OUTDOOR UNIT
Unit: inch
CLEARANCES
Specifications are subject to change without notice. Manufacturer reserves the right to discontinue or modify specifications or designs without notice or without incurring obligations. All Rights reserved.
GREECOMFORT.COM/SYSTEM-DOCUMENTATION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>