XTRONS PST-PSD-Series Driving Entertainment User Manual
- June 9, 2024
- XTRONS
Table of Contents
- XTRONS PST-PSD-Series Driving Entertainment
- Precaution
- To ensure safe driving
- To prevent damage
- Installation notes
- Home Screen
- Customize the unit
- Radio
- USB
- AUX Input
- Bluetooth
- Screen Mirroring
- Connect to the Internet
- Settings
- Network & Internet
- Car Infotainment
- Apps & Notifications
- Storage
- Memory
- Users & Accounts
- System
- Troubleshooting
- Appendix
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
XTRONS PST-PSD-Series Driving Entertainment
Thank you for buying this XTRONS product. Please read through these instructions so you will know how to operate this product properly. After you have finished reading the instructions, keep this document in a safe place for future reference.
NOTICES
Installation or servicing of this product by persons without training and
experience in electronic equipment and automotive accessories may be dangerous
and could expose you to the risk of electric shock, injury or other hazards.
The navigation features of this product (and the rear view camera option if
purchased) are intended solely to aid you in the operation of your vehicle. It
is not a substitute for your attentiveness, judgment and care when driving.
To avoid the risk of damage and injury and the potential violation of
applicable laws, this product is not for use with a video image that is
visible to the driver.
XTRONS disclaims any liability for any bodily injury or property damage that
might result from any improper or unintended use.
Pay close attention to all warnings in this manual and follow the instructions
carefully.
The screens shown in the examples may differ from actual screens, which may be
changed without notice for performance and function improvements.
Precaution
Important safety information
WARNING
XTRONS does not recommend that you install this product yourself. This product is designed for professional installation only. We recommend that only those service personnel, who have special training and experience in mobile electronics, set up and install this product. NEVER SERVICE THIS PRODUCT YOURSELF. Installing or servicing this product and its connecting cables may expose you to the risk of electric shock or other hazards, and can cause damage to this product that is not covered by warranty.
- Do not allow this product to come into contact with liquids. Electrical shock could result. Also, damage to the product, smoke and overheating could result from contact with liquids.
- If liquid or foreign matter should get inside this product, park your vehicle in a safe place, turn the ignition switch off (ACC OFF) immediately and consult your dealer. Do not use this product in this condition because doing so may result in a fire, electric shock, or other failure.
- If you notice smoke, a strange noise or odor from this product, or any other abnormal signs on the screen, turn off the power immediately and consult your dealer. Using this product in this condition may result in permanent damage to the system.
- Do not disassemble or modify this product, as there are high-voltage components inside which may cause an electric shock. Be sure to consult your dealer for internal inspection, adjustments or repairs.
Before using this product, be sure to read and fully understand the following safety information:
- Do not operate this product or any applications if doing so will divert your attention in any way from the safe operation of your vehicle. Always observe safe driving rules and follow all existing traffic regulations. If you experience difficulty in operating this product or reading the display, park your vehicle in a safe location and apply the parking brake before making the necessary adjustments.
- Never set the volume of this product so high that you cannot hear outside traffic and emergency vehicles.
- To promote safety, certain functions are disabled unless the vehicle is stopped and/or the parking brake is applied.
- Keep this manual handy as a reference for operating procedures and safety information.
- Do not install this product where it may (i) obstruct the driver’s vision, (ii) impair the performance of any of the vehicle’s operating systems or safety features, including air bags or hazard lamp buttons or (iii) impair the driver’s ability to safely operate the vehicle.
- Please remember to fasten your seat belt at all times while operating your vehicle. If you are ever in an accident, your injuries can be considerably more severe if your seat belt is not properly buckled.
- Never use headphones while driving.
To ensure safe driving
WARNING
- LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT PARKED STATUS AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE.
- Do not take any steps to tamper with or disable the parking brake interlock system which is in place for your protection. Tampering with or disabling the parking brake interlock system could result in serious injury or death.
- To avoid the risk of damage and injury and the potential violation of applicable laws, this product is not for use with a video image that is visible to the driver.
- In some countries the viewing of video images on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they be obeyed.
If you attempt to watch video images while driving, the warning “Viewing of front seat video source while driving is strictly prohibited.” will appear on the screen. To watch video image on this display, stop the vehicle in a safe place and apply the parking brake. Please keep the brake pedal pushed down before releasing the parking brake.
Before installing this product
- Use this unit with a 12-volt battery and negative grounding only. Failure to do so may result in a fire or malfunction.
- To avoid shorts in the electrical system, be sure to disconnect the (-) battery cable before installation.
To prevent damage
WARNING
- The black cable is ground. When installing this product or power amp (if purchased), make sure to connect the ground wire first. Ensure that the ground wire is properly connected to metal parts of the car’s body. The ground wire of the power amp and the one of this product or any other device must be connected to the car separately with different screws. If the screw for the ground wire loosens or falls out, it could result in fire generation of smoke or malfunction.
- When replacing the fuse, be sure to only use a fuse of the rating prescribed on this product.
- To avoid short-circuiting, cover the disconnected lead with insulating tape. It is especially important to insulate all unused speaker leads, which if left uncovered may cause a short circuit.
Installation notes
- Do not install this product in places subject to high temperatures or humidity, such as:
- Places close to a heater, vent or air conditioner.
- Places exposed to direct sunlight, such as on top of the dashboard.
- Places that may be exposed to rain, such as close to the door or on the vehicle’s floor.
- Install this product in an area strong enough to bear its weight. Choose a position where this product can be firmly installed, and install it securely. If this product is not securely installed, the current location of the vehicle cannot be displayed correctly.
- Install this product horizontally on a surface within 0 to 20 degrees tolerance (within 5 degrees to the left or right). Improper installation of the product with the surface tilted more than these tolerances increased the potential for errors in the vehicle’s location display, and might otherwise cause reduced display performance.
- When installing, to ensure proper heat dispersal when using this product, make sure you leave ample space behind the rear panel and wrap any loose cables so they are not blocking the vents.
- In order to prevent interference, set the following items as far as possible from this product, other cables or leads:
- FM, AM antenna and its lead
- GPS antenna and its lead
- DAB+ radio antenna and its lead
- Digital TV antenna and its lead
In addition, you should lay or route each antenna lead as far as possible from other antenna leads. Do not bind, lay or route them together, or cross them. Electromagnetic noise will increase the potential for errors in the vehicle’s location display.
To avoid battery exhaustion
Be sure to run the vehicle engine while using this product. Using this product without running the engine can drain the battery.
WARNING
Do not install this product in a vehicle that does not have an ACC wire or
circuitry available.
Home Screen
- Home
- Recent apps
- Back
- Music
- Bluetooth Music
- Radio
- Date & Time
Use apps
Tap an app to open it.
Customize the unit
Arrange apps
Touch and hold any app on the Home screen, and then drag the app around. Drag
an app to the edge of the screen to move it to a different Home screen. Swipe
left or right to see other screens.
Change the wallpaper
You can set an image or photo as wallpaper for the Home screen. You can choose
from the preset wallpapers, or choose from images or photos stored on a USB
storage device.
Change the wallpaper. Swipe up from the bottom of any home screen, and then
tap Wallpapers.
Adjust the screen brightness
Go to settings > Car Infotainment > Display, and then drag the slider.
Customize Quick Settings
To completely expand Quick Settings, swipe down twice from top to down. First
swipe will show a list of notifications along with top six or five tiles from
quick settings. When you swipe down again, the Quick Settings panel will
expand completely. Tap the pencil icon located on the bottom-right corner and
simply drag and move the tiles that you want to rearrange.
Radio
-
Broadcast frequency slider
-
RDS (Radio Data System)
AF (Alternative Frequencies)
PTY (Program Type)
TA (Traffic Announcement) -
Perform manual tuning
-
Preset channel list
Select a frequency you like and then touch and hold any of preset frequency keys to store it.
Up to 18 FM stations and 12 AM stations can be stored in memory. -
Volume
-
Stereo Switch
-
FM band (FM1/FM2/FM3)
-
AM band (AM1/AM2)
-
Perform non-stop seek tuning
-
Equalizer adjustment
-
Exit
USB
Plug a USB storage device and then tap Music on the Home screen to play music, tap Video to play video files, or tap Gallery to view images and photos .
AUX Input
You can display the video image output by the device connected to this unit.
CAUTION
For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.
Bluetooth
Connect your mobile phone to this unit via Bluetooth and use an external microphone to make and receive hands-free calls.
CAUTION
For your safety, avoid talking on the phone as much as possible while driving.
Connection (Bluetooth pairing)
- a. The Bluetooth device must be within 1 meter of this unit. Turn on Bluetooth on the device.
- b. Tap XTRONS in the devices list of your Bluetooth device to pair.
Phone calls
Enter the number to make a call. You can also choose a contact from the phone book to make a call.
Phone book
Synchronize the contacts from your Bluetooth device. Find or delete a contact.
Recent calls
View recent outgoing calls, incoming calls or missed calls.
Bluetooth music
Play music stored in your Bluetooth device on this unit.
- At first, you need to operate the music playback on your Bluetooth device. Then you can operate the Bluetooth music on the unit.
- Please note that the unit may not support the Bluetooth music function whilst some mobile phones are not quite compatible with the unit.
Screen Mirroring
Tap EasyConnection on the apps menu screen to enter screen mirroring mode. When you connect a mobile phone with compatible applications installed, you can control the applications for the mobile phone directly from this unit.
For your Android device:
- Connect via a USB cable
- a. Go to Settings > About Device, and then tap Build number 7 times to enable Developer options. Turn on USB debugging. A message Allow USB debugging?will pop up. Turn on the Always allow from this computer option, and then tap OK.
- b. Connect your Android smart phone to this unit via a USB cable.
- Connect via Wi-Fi
- a. Go to Settings > Wireless & networks > More > Tethering & portable hotspot, and then turn Portable Wi-Fi hotspot on or tap Set up Wi-Fi hotspot.
- b. Tap Android WiFi and then select your Android device name from the hotspot list. Enter the password when prompted.
* Please note this function is only applicable for Android devices equipped with wireless mirroring function, and it only supports Android versions above 4.0. Audio streaming requires a Bluetooth connection.
For your iOS device:
- a. Go to Settings > Personal Hotspot, and then turn Personal Hotspot on.
- b Tap iPhone WiFi, and then select your iPhone name from the hotspot list. Enter the password when prompted.
- c. Tap AirPlay in the Control Center on your iPhone. Select EC-Mirror and turn Mirroring on.
* On iPhone 4/4s, only photos can be streamed wireless to this unit. On iPhone 5 and other later iPhone models, both music and photos can be streamed wireless to this unit. Video streaming requires the appropriate Apple cable or adapter.
Navigation
Built-in navigation offers detailed, reliable route guidance information to
help you get where you want to go.
You can actually download a range of GPS Navigation apps via Google Play and
run them on the unit. You can download Sat Nav apps like TomTom, Navigon,
Route 66, Sygic, iGO, Google Maps and many more.
Connect to the Internet
You can connect the unit to the Internet whenever necessary, using a Wi-Fi connection (if available) or 3G/4G network (the 3G/4G dongle is sold separately). You can browse the web, download apps via Google Play, play online games, etc. The possibilities are endless with the Internet in your car .
OBD2 (Optional)
The unit supports OBD2 (On-Board Diagnostics) car diagnostics. With the OBD2
function available on this unit, you can retrieve real-time data and trouble
codes from your vehicle computer. All the data of your vehicle is displayed to
you.
(The OBD2 Bluetooth car diagnostic scanner tool is sold separately).
DVR (Optional)
You can control a car DVR camera (sold separately) on this unit and use it to record all the events of a journey.
DAB+ (Optional)
With use of a DAB dongle (sold separately), the DAB+ (Digital audio
broadcasting) tuner lets you enjoy the convenience of digital radio, while
Auto DAB+ Tuning makes sure there are less signal interruptions. DAB+ digital
radio brings you high-detail, digital-quality sound with lots of stations,
program information and more.
The DAB antenna (sold separately) needs to be positioned on the windscreen of
your vehicle.
TPMS (Optional)
Tire Pressure Monitoring System (TPMS) increases driving safety and provides a better understanding of your vehicle’s tire conditions. Once you have correctly installed the TPMS (sold separately), the sensors will automatically monitor the tire pressure and the temperature, and transmit real-time statistics to the receiver.
Settings
Network & Internet
Wi-Fi
Turn Wi-Fi on or off.
Choose a network: Tap one of the listed networks and then enter the password
if required.
Data usage
View the data usage for your apps.
Hotspot & tethering
Turn Wi-Fi hotspot on or off.
Set up Wi-Fi hotspot.
VPN
Tap the + button and provide the VPN’s details. Tap the VPN to connect once
you have set it up. You will be asked to enter a username and password.
Car Infotainment
Common
Standby time
Choose from 0 Minute, 10 Minutes, 20 Minutes, 30 Minutes, and 60 Minutes.
AssistiveTouch
Turn AssistiveTouch on or off.
Reverse Volume Suppression
Choose from None, Weak, Medium, and Strong.
Boot Logo
Enter the password 5678. Select one of the preinstalled car manufacturer logos
as your start up screen. You can also select images imported from an SD memory
card. You need to insert the SD memory card into the GPS card slot. Images
should stay at the 800 x 480 pixels resolution. The image format should be
BMP.
Reset All Settings
Reset settings and recorded contents to the factory settings.
Display
Daytime Backlight Set
Drag the slider to adjust the screen brightness in the daytime.
Nighttime Backlight Set
Drag the slider to adjust the screen brightness at nighttime.
Auto Mode
Turn Auto Mode on or off.
Key Light Color
This enables you to change the illumination color of the buttons to your
personal preference. You can choose from a wide variety of colors. Drag the
color bars of red, green and blue to create a favorite color.
* Please note the multi-colored button illumination feature is not supported on all models.
Volume
Drag the slider to adjust the volume in different modes.
Sound
Equalizer adjustment
Select one of the stored equalizer curves, or customize the equalizer curve as
desired.
Fader adjustment
Select a listening position that you want to make as the center of the sound
effects.
Video
Disable Video in Motion
On: Video images cannot be viewed while your vehicle is in motion.
Off: Video images can be viewed while your vehicle is in motion.
CAUTION
For safety reasons, video images cannot be viewed while your vehicle is in
motion. To view video images, stop in a safe place and apply the parking
brake.
Reversing Warning Line
Navigation
Autostart Navigation
On: Automatically starts the GPS navigation app when the unit is powered
on.
Off: Does not automatically start the GPS navigation app when the unit is
powered on.
File Path
Navi Mixed
Bluetooth
Turn Auto Connect/Auto Answer on or off.
SWC
This allows you to use the steering wheel control of your vehicle to control
the unit.
About Device
Apps & Notifications
App info
Manage all the apps downloaded on the unit or on an SD memory card.
Notifications
Add or change an alert style for notifications from apps.
App permissions
View and manage all app permissions. You will see a list of different
categories of permissions along with the number of apps installed that have
access to that permission.
Advanced
Default apps and special app access.
Storage
See how much storage space is available on the unit’s internal storage. You can tap FREE UP SPACE to delete photos, videos, and apps that you haven’t used recently.
Memory
View the average memory usage. The default time-period is set to 3 hours. You can switch between 3, 6, 12 hours or 1 day to view the average usage.
Users & Accounts
Add users or add accounts.
Manage services in Google settings.
System
Languages & input
Language
Set the language for the unit. Choose from English, French, German, Spanish,
and many more. You can add a language and arrange preferred language order by
dragging them.
Virtual keyboard
The default keyboard is Android Keyboard(AOSP) and Google voice typing. You
can manage the installed keyboards.
Physical keyboard
Set up your external keyboard.
Advanced
- Spell checker
- Autofill service
- Personal dictionary
- Pointer speed
- Text-to-speech output
Date & time
- Automatic date & time
- Automatic time zone
- Set date
- Set time
- Select time zone
- Use 24-hour format
About Car
- Status
- Legal information
- Model
- Android version
- Android security patch level
- Kernel version
- Build number
- Custom build version
Troubleshooting
If you have problems operating this product, refer to this section. The most common problems are listed below, along with likely causes and solutions.
No power
- The car engine has not been started. Start the car engine.
- Incorrect wiring connection. Check the wiring.
- The fuse has been damaged. Replace the fuse.
- The CANBUS box has been damaged. Replace the CANBUS box.
No sound
- The volume is too low. Adjust the volume.
- Incorrect wiring connection. Check the wiring.
The screen is covered by a caution message and the video cannot be shown
- The parking brake lead is not connected or applied. Connect the parking brake lead correctly, and apply the parking brake.
- The parking brake interlock is activated. Park your vehicle in a safe place and apply the parking brake.
Image flashes or distorted
- Video connection is incorrect.
Preset station lost
- Battery cable is not correctly connected. Connect the battery cable to the terminal that is always live.
Poor radio reception
- The antenna connection is incorrect. Check the antenna connection.
- Interference may be introduced. Check for sources of interference.
- Signals are too weak. An additional antenna signal amplifier booster may be required.
- The antenna has been damaged. Replace the antenna.
- The local seek tuning has been turned off. Turn the local seek tuning on.
A black screen is displayed, and operation is not possible
- Sleep mode is on. Press the POWER button or touch the screen to release the mode.
- The rear view camera image is displayed with no camera connection and the wrong camera polarity setting. Install the rear view camera and then change the camera polarity settings.
GPS positioning is not possible
- GPS positioning is disabled if signals cannot be received from more than two GPS satellites.
- In some driving conditions, signals from GPS satellites may not reach your vehicle. In this case, it is impossible for the system to use GPS positioning.
- If a car phone or cellular phone is used near the GPS antenna, GPS reception may be lost temporarily.
The paired mobile phone connects and disconnects constantly
- The Bluetooth reception is poor. Move the mobile phone closer to the product or remove any obstacle between the mobile phone and the product.
- Some mobile phones may connect and disconnect constantly when you make or end calls. This does not indicate any malfunction of the product.
- For some mobile phones, the Bluetooth connection may be deactivated automatically as a power-saving feature. This does not indicate any malfunction of the product.
Appendix
When using this product
- Use this product where the ambient temperature is between -10º and 50º C. Using this product in the conditions outside of its operating range might cause temporary or permanent damage to the system, and such damage may not be covered by the manufacturer’s warranty. Store the product where the temperature is between -20º and 80º C.
- Do not connect a USB storage device via a USB hub.
- Connecting a USB cable of which total length is longer than 5 meters may result in abnormal playback.
- When this product cannot recognize the connected USB storage device, disconnect the device and replace it with another USB storage device.
- Do not use any software which is not provided by XTRONS to update the system. If you require the system update, please consult your dealer.
Handling the screen
- When the screen is subjected to direct sunlight for a long period of time, it will become very hot, resulting in possible damage to the screen. When not using this product, avoid exposing it to direct sunlight as much as possible.
- Do not use the screen at temperatures higher or lower than the operating temperature range, because the screen may not operate normally and could be damaged.
- The screen is exposed in order to increase its visibility within the vehicle. Please do not press strongly on it as this may damage it.
- Do not push the screen with excessive force as this may scratch it.
- Never touch the screen with anything besides your finger when operating the touch panel functions. The screen can scratch easily.
Maintaining the screen
- When removing dust from or cleaning the screen, first turn this product off and then wipe the screen with a soft dry cloth.
- When wiping the screen, take care not to scratch the surface. Do not use harsh or abrasive chemical cleaners.
For more information, please visit our websites
For installation acand technical advice, please visit
References
- http://bbs.xtrons.com/ - Car DVD BBS,Xtrons BBS,Car DVD Player BBS,Car Entertainment BBS
- Buy Android Car Stereos, Car DVD Players, Head Units | Xtrons