BREITLING Superocean Automatic 36 Stainless Steel Watch Instruction Manual
- June 3, 2024
- BREITLING
Table of Contents
Superocean Automatic 36 Stainless Steel Watch
Instruction Manual
PREPARATION FOR USE
WINDING – TIME-SETTING
- Unscrew the water-resistant crown anti-clockwise. Wind the watch through approximately 40 clockwise turns of the crown.
- Pull the crown out to position 2. Then adjust the hour and minute.
- Push the crown back into position 1. Turn it gently clockwise while applying light pressure, and retighten it until you feel some resistance. Do not force it !
SPECIAL CHARACTERISTICS
UNIDIRECTIONAL BEZEL WITH INDEX MARKERS
The bezel of your watch is marked with 12 index markers: they are used as
points of reference to mark a start time or a limit time you wish to remember.
On models with no chronographfunctions, they also provide a “minute chrono”
function enablingyou to measure the elapsed time in minutes.
For safety, the bezel can only turn counterclockwise.
SUN COMPASS
Your Breitling chronometer may be used as a sun compass, thus enabling you
to determine North and South. For regions that have instated daylight saving
time, subtract one hour when aligning the watch.
In the Northern Hemisphere
Point the hour hand precisely towards the sun. In relation to thewatch dial,
the point located midway between the current time and12 o’clock indicates
South, North being exactly opposite.
In the Southern Hemisphere
Point the hour-marker located at 12 o’clock on the dial precisely towards the
sun. In relation to the watch dial, the point located midway between the
current time and 12 o’clock indicates North, South being exactly opposite.
MAINTENANCE
Your Breitling chronometer is a sophisticated instrument which is constantly subjected to a wide variety of stresses and strains. Within a very small volume, a large number of components contribute to handling all the functions. Their mechanical action inevitably leads to a certain amount of wear and tear, which may be controlled by maintenance consisting of relubrication and replacing worn components. Like any precision measurement instrument, your watch must be regularly maintained in order to function at its highest level of potential: the frequency of this operation varies according to actual use. Breitling or your authorized retailer will be happy to handle the procedure.
WATER RESISTANCE
The movement of your chronometer is protected by a complex case fi tted with
gaskets to ensure its water resistance. Under the infl uence of various
external agents – perspiration, chlorinated or salt water, cosmetics,
fragrances or dust – these gaskets gradually deteriorate. That is why water
resistance cannot be permanently guaranteed. If used intensively in water, we
recommend having an annual water resistance check conducted. In any event,
such an appraisal must be done every two years. This operation, which takes
only a few minutes, may be conducted by a Breitling authorized maintenance
centre, or by an authorized retailer
(www.breitling.com).
Breitling models are water-resistant to varying degrees. The extent of the water resistance, expressed in metres (M), is a standard value and does not indicate an absolute immersion depth. The crown and pushpieces must not under any circumstances be operated under water or when the watch is wet. The table below indicates the conditions in which your watch may reasonably be used, according to its degree of water resistance:
If your watch is equipped with a screw-lock crown, ensure that this is locked before any use in water. This also applies to screw-lock pushpieces.
USEFUL TIPS
Breitling genuine leather straps are crafted with the most refi ned materials
and represent extremely high-quality products. Like all objects in natural
skin (shoes, gloves, etc.), their length of life varies considerably,
according to the conditions in which they are worn. ln particular, water,
cosmetics and perspiration accelerate the ageing process. A metal or synthetic
Breitling bracelet is thus better suited to activities involving frequent
contact with water or moisture. Breitling metal cases and bracelets are made
from the fi nest alloys and guarantee sturdiness and wearer comfort. Regular
cleaning by rinsing and brushing in clean water will keep your watch shiny.
This operation is strongly recommended after each immersion in salty or
chlorinated water. For watches fi tted with a leather strap, the same advice
applies, as well as avoiding getting the strap wet.
WHAT TO AVOID
Like any valuable objects, Breitling chronometers deserve special care. It is
important to protect them from jarring and knocks by hard objects, and not to
expose them to chemical products, solvents, dangerous gases, or magnetic fi
elds. Moreover, your Breitling chronometer is designed to run smoothly at
temperatures ranging between 0°C and 50°C.
This booklet is completely made from residues of sugar cane instead of wood. The paper is biodegradable, compostable, and recyclable.
Please note that the diagram above is meant for illustrative purposes and might slightly differ from reality.
Breitling Automatic
YOUR BREITLING CHRONOMETER
A chronometer is a high-precision time-keeping instrument that has
successfully passed the entire battery of tests imposed by the COSC (Swiss
Official Chronometer Testing Institute), a neutral and independent body which
individually tests each movement according to the specifications in force.
CAUTION
Mechanical watches with date, day, month, and moon-phase indicators are
equipped with a complex mechanism that is set in motion between 8 pm and 3 am.
It is vital to avoid adjusting the calendar or moving the hands backwards
during this period.
STEP 1
Check whether the crown should be unscrewed (counterclockwise) before you
carry out the following steps.
STEP 2
Wind the watch with approximately 40 clockwise turns of the crown.
STEP 3
If the watch has no date aperture, pull the crown out to position 2. Set the
hour and minute hands.
If the watch does have a date aperture, proceed as follows: pull the crown out
to position 3. Turn it so that the hour and minute hands point to 06:25. Push
the crown into position 2. Turn it counterclockwise or clockwise to set the
date to the previous day. Pull the crown out to position 3. Turn the hands
forwards until the correct date appears at midnight. Set the hour and minute
hands.
STEP 4
Push the crown back into position 1. If you had to unscrew the crown in step
1, follow this final step: press the crown gently, turning it clockwise, then
tighten it again until you feel some resistance.
Do not force it!
STEP 5
For further details, please refer to the full User Manual which can be
accessed by scanning the QR Code on the Quick Start Guide or visit
www.breitling.com/user-manuals.
WHAT TO AVOID
Like any valuable object, Breitling chronometers deserve special care. It is
important to protect them from jarring and knocks by hard objects. Do not
expose them to chemical products, solvents, dangerous gases, or magnetic
fields. Your Breitling chronometer is designed to run smoothly at temperatures
ranging between 0°C and 50°C.
WARRANTY
Please check if your warranty has been activated by scanning the QR Code. Note
that Breitling watches purchased from an authorized Breitling retailer are
guaranteed against any manufacturing defects, as indicated on our website
under www.breitling.com/international-warranty
Detailed information about the specific warranty terms, coverage and
exclusions applicable to your product is accessible in your warranty account
at
www.breitling.com/my-account
Detailed information about our after-sales service and applicable terms and
conditions is accessible on our website under www.breitling.com/service-
terms
© June 2020, Breitling SA, Switzerland