DODGE 82093 Pickup Installation Guide
- June 13, 2024
- DODGE
Table of Contents
DODGE 82093 Pickup
Product Information
The product is a Dodge Pickup (Furgoneta) stabilizer rod, designed to improve stability and control of the vehicle. It comes with installation instructions and rubber gaskets for proper installation.
Product Usage Instructions
- Before starting the installation, ensure that all surfaces are clean and dry.
- Connect the stabilizer rod to clamp A using the rubber gaskets provided in the instruction bag.
- Connect clamp B of the stabilizer rod to the stabilizer (as shown) using the rubber gaskets provided in the instruction bag.
- Move the wheels all the way to the left and right to ensure proper contact of the wheel heights. Make sure there is no interference with the vehicle’s structure or any other components.
It is important to follow these instructions carefully to ensure proper installation and avoid voiding any warranties. Any alterations made to the product outside the manufacturer’s premises or failure to install it according to the provided instructions may result in warranty voidance.
FORM NO. 82093
NOTE: All surfaces should be clean and dry before attaching brackets.
- Place wheels in straight forward position.
- Place stabilizer racket “A” inside frame as shown. Install bolt through bracket and hole in frame. Secure with flat washer, lock washer and nut provided.
- Attach stabilizer rod to bracket “A” using bushing stack-up instructions printed on bag.
- Attach stabilzer bracket “B” to stabilizer as shown using bushing stack-up instructions printed on bag.
- Extend stabilizer piston rod 4 inches and place bracket “B” against front face of relay rod. Secure with u-bolts and nuts.
- Turn wheels to extreme left and right making sure that wheel stops are contacted. Ascertain that no interference with oil pan, frame member, etc. occurs.
- Be certain that all nuts are properly tightened before releasing installation.
BOX CONTENTS – See other sheet (Form No. 82031).
CAUTION: Any and all warranties including but not limited to any express warranties, implied warranty of merchantability, or implied warranty of fitness for a particular purpose shall not apply to any product altered in any way outside the premises of the manufacturer or to any product which is not installed in accordance with the written instructions provided by the manufacturer for installation of the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>