MINISFORUM MKBi83 Wireless Mechanical Gaming Keyboard User Guide
- June 8, 2024
- MINISFORUM
Table of Contents
MINISFORUM MKBi83 Wireless Mechanical Gaming Keyboard
Specifications
- Keyboard type: Three-mode mechanical keyboard
- Attended Mode: Bluetooth, 2.4G, Wired
- Switch: Kailh Mechanical switch
- Report Rate: 1000HZ (Wired mode)
- Transmission distance: 10 meters
- Function: FN combination function key
- Key layout: 83 key
- Keycap material: PBT
- Backlight: RGB
- Battery capacity: 3000mAh
- Cable: Type-C USB data cable
- Input voltage current: 5V/500mA
- Size: 334 x 140 x 48 mm
- Weight: 910 g
Product Usage Instructions
Connection Modes
The keyboard supports three connection modes: Bluetooth, 2.4G, and Wired.
Switch between modes using the designated keys
.FAQ
Q: What devices are compatible with the keyboard?
A: Devices with USB ports or support Bluetooth low power technology can be
connected to the keyboard. Compatible with Windows, Mac OS, and Android.
Product diagram
Connection mode
FN combination function keys
Switch removal and insertion instructions
Full-key adopts the hot-swappable switch structure,and the switch can be easily removed by using switch puller and the desired switch can be easily insta
Basic specifications
- Keyboard type: Three-mode mechanical keyboard Attended
- Mode: Bluetooth、2.4G、 Wired
- witch: Kailh Mechanical switch
- Report Rate: 1000HZ/1000HZ (Wired mode)
- Transmission distance: 10 meters
- Key layout: 83 key
- Keycap material: PBT
- Backlight: RGB
- Battery capacity: 3000mAh
- Cable: Type-C USB data
- cableInput voltage current: 5V/ 500mA
- Size: 334 x 140 x 48 mm
- Weight: 910g
System requirement
Devices that have USB portsor support Bluetooth low power technology can be connected to a keyboard. The keyboard supports Windows all, Mac OS, and Android.
Warning
If liquid enters the product, please disconnect it from the computer and remove the product immediately.Continuing to use may cause fire or electric shock, please contact the agent for inspection and maintenance in time. The product shell should be checked regularly for damage. Maintenance operations are not within the scope of product compliance requirements;
Disassembly, replacement of parts, modification, and transformation of this product without express approval will cause the user to lose the right to operate this equipment and invalidate the product warranty.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a
particular iinstallation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modiÞcations to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- his device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in 0mm exposure condition, compliance with exposure
requirements.
After-Sale Service
After-Sale Service Company : Micro Computer (HK) Tech Limited
Address:FLAT/RM 18, 28/F, Shui On Centre, 6-8 Harbour Road, Waterfront Wan
Chai, Hong Kong
Tel:852-23860910
- Email: support@minisforum.com
- Web: https://www.miniscloud.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>