FeiyuTech FM1 SCORP Focus Motor User Guide

FeiyuTech FM1 SCORP Focus Motor

Overview

1. Indicator
2. M button
3. Power port
4. Roller
5. Gear

Installation

1. Attach the focus gear strip to the lens focus ring or the zoom ring.

2. Attach the fixed bracket to the quick release plate of gimbal via hexagonal screw.

3. Insert the aluminium rod:
   Insert aluminium rod and move it to an appropriate position, then tighten the thumb screw (remove lens holder if needed)

4. Install lens holder: Install the lens holder on the fixed bracket as needed.

5. Attach the focus motor: Attach the focus motor to an appropriate position, ensuring the motor gear and gear strip make good contact, tighten the thumb screw.

6. Connection: Connect the focus motor power port to an extension port which on the fixed plate via cable.

After the installation is complete, please balance the gimbal before turn it on.

Usage for focus motor

Indicator

M button operation

Single tap
Calibrate automatically ( Focus motor rotate the focus gear strip to mechanical limit automatically, and then rotate in opposite direction to reach the other mechanical limit)
Double tap
Calibrate by hand*(Turn the multifunction knob to control the focus motor reach the starting point on the lens, and turn it to reach the end point, single tap M button again to finish.
Triple tap
Knob control the focus motor inversely
Long press
Indicator on/off

For lenses without a mechanical limit, please calibrate it by hand.

Use gimbal to control focus motor

Set control option

Set on Feiyu SCORP Pro gimbal
Set via screen: Swipe up on touch screen, set multifunction knob control option as focus motor in “Main knob setting” or “Handle knob setting”, then the focus motor can be controlled by corresponding knob
Main knob control the focus motor which connect with extension port 1, handle knob control the focus motor which connect with extension port 2.

Set via button: Long press the knob function switching button to switch the control option of Multifunction knob (Main knob) as focus motor 1.

Set on other gimbals in SCORP series
Set via screen: Swipe up on touch screen, single tap the first line to switch the control option of Multifunction knob as focus motor, then the focus motor can be controlled by knob.

Set via button: Long press the knob function switching button to switch the control option of Multifunction knob as focus motor.

Control via Multifunction knob
Turn Multifunction knob to control focus motor to adjust focus/zoom.

List

1. Focus motor                  X1
2. Focus gear strip            X1
3. Fixed bracket                X1
4. Aluminium rod             X1
5. Cable                            X1
6. Thumb Screws            X1
7. Hexagonal screw         X1
8. Hex wrench                X1

Specification

• Product name: Feiyu SCORP Focus Motor
• Product model: FM1
• Operating Temperature: – 20℃ to 55℃
• Weight: 108g
• Dimensions: 807024mm
• Maximum torque: 0.38 N.m
• Operating current: no-load current: 35mA, current when motor locked: 660mA
• Operating Voltage: 5V
• Rod clamp inner diameter: 10mm
• Gear teeth: Module: 0.8, Number of gear teeth: 40
• Compatible Gimbals: Feiyu SCORP Pro/Feiyu SCORP/Feiyu SCORP-C/Feiyu SCORP-Mini

Notice

1. Make sure motor spinning is not blocked by external force when the product is power on.
2. The product DO NOT contact water or other liquid if the product is not mark waterproof or splash-proof. Waterproof and splash-proof product DO NOT contact sea water or other corrosive liquid.
3. DO NOT disassembly the product except marked detachable. It need send to FeiyuTech after-sales or authorized service center to fix it if you accidently disassembly and cause abnormal work. The relevant costs are borne by user.
4. Prolonged continuous operation may cause the product surface temperature to rise, please operate carefully.
5. DO NOT drop or strike the product. If the product is abnormal, contact FeiyuTech after-sales support.

Storage and Maintenance

1. Keep the product out of the reach of children and pets.
2. DO NOT leave the product near heat sources such as a furnace or heater. DO NOT leave the product inside of a vehicle on hot days.
3. Please storage the product in dry environment.
4. Never use the product when the temperature is too high or too low.

Not include c amera and gimbal.

This document is subject to change without notice.
If you have any questions about this document, please contact us by the following ways.

Manufactured by: Guilin Feiyu Technology Incorporated Company
Website: www.feiyu-tech.com
Tel: +86 773-2320865
E-mail: support@feiyu-tech.com

References

• FeiyuTech - Official Website

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>