ACCLAIM LIGHTING IN200701 Light 10 Inch Polished Nickel Convertible Semi-Flush Ceiling Light Instruction Manual

June 9, 2024
ACCLAIM LIGHTING

ACCLAIM LIGHTING IN200701 Light 10 Inch Polished Nickel Convertible Semi-

Flush Ceiling Light

OVERVIEW

  1. OUTLET BOX
  2. WHITE WIRE
  3. GROUND WIRE
  4. BLACK WIRE
  5. WIRE CONNECTOR
  6. MACHINE SCREW
  7. MOUNTING PLATE
  8. GROUND SCREW
  9. HEX NUT
  10. MOUNTING SCREW
  11. WING NUT
  12. FLAT WASHER
  13. CANOPY
  14. BALL NUT
  15. SOCKET ASSEMBLY
  16. KNOB
  17. GLASS SHADE

INSTALLATION INSTRUCTIONS

Please read carefully and save these instructions, as you may need them at a later date

CAUTION

WARNING : Risk of Fire. Consult a qualified electrician to ensure correct branch circuit conductor. Min 90ºC supply conductors.
Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock.

GENERAL

  • All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician.
  • Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions

ASSEMBLY AND INSTALLATION

  1. Attach the socket assembly (15) to the canopy (13) and flat washer (12), then secure with the wing nut (11).
  2. Thread two machine screws (6) to the mounting plate (7) and secure with the hex nut (9).
  3. Secure the mounting plate (7) to the outlet box (1) with mounting screws (10) .
  4. Pull out the outlet wire and ground wire from the outlet box (1). Make wire connections.
  5. Ribbed wire (w/o marking) from light to White wire (2) from power source.
  6. Smooth wire (w/o marking) from light to Black wire (4) from power source.
  7. Loop the ground wire (3) to mounting plate (7) with a ground screw (8).
  8. Attach the canopy (13) against the outlet box (1), secure with the ball nut (14).
  9. Install bulbs: (bulbs not included) (Do not exceed the maximum capacity recommended on the sockets).
  10. Attach glass shade (17) to socket assembly (15) and secure with the knob (16).

INSTALLATION IS NOW COMPLETE

1500 Cherokee Parkway, Suite 100, Acworth, GA 30102
P : 866-845-5451
F : 866-816-6165
E : service@acclaim-lighting.com
www.acclaim-lighting.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals