Sycamore Lighting SY8850 Solaris Pro Recti LED Cabinet Light Instructions
- July 26, 2024
- sycamore Lighting
Table of Contents
Sycamore Lighting SY8850 Solaris Pro Recti LED Cabinet
Installation instructions : Solaris Square Diffused/Rectangle Diffused Light SY8850
Thank you for purchasing this SycamoreLED.com product. Please make sure instructions are followed carefully prior to and during installation and the product is not altered, otherwise warranty may not be valid. For technical support or warranty information please visit www.sycamoreLED.com, or call our dedicated technical helpline +44 (0) 113 2866686.
IMPORTANT-Please read prior to installation
- Please read these instructions carefully before commencing any work
- This product must be installed by a qualified electrician in accordance with the current lEE wiring regulations
- To prevent electrocution switch the power off at the mains supply before installing or maintaining this fitting
- Ensure others cannot restore the electrical supply without your knowledge
- The PSU must be rated 12VDC and be compatible with the pre-wired connector system of this product Never exceed the wattage stated
DIAGRAMS
INSTALLATION
Choose the desired location for light and ensure the cable can be connected to the PSU Screw the light into position using the screws provided and make sure they are fitted square to the cabinet/shelf Connect to PSU using fast fit connector Check the operation of the light fitting
CARE IN USE
- Please note this fitting has nonreplaceable parts
- Always switch off or disconnect from the mains when cleaning the product.
- We recommend cleaning with a soft dry cloth. Do not use scourers, abrasives or chemical cleaners.
NOTES
This version of the popular Solaris Square/Recti, features a diffused cover meaning no visible LED points
- SycamoreLED.com
- LS25 2DY
- Technical helpline : 0113 2866686
- Please email sales@sycamoreled.com to register your product
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>