denver LED-1033 10.1 Inch Digital LED TV User Manual

LED-1033 denver.eu
May , 2022

Safety information

Please read the safety instructions carefully before using the product for the first time and keep the instructions for future reference.

1. This product is not a toy. Keep it out of reach of children.

2. Warning: This product includes a removable Lithium button cell battery in remote control and Lithium battery inside the unit.
   Only use CR2025 3V lithium cell in remote control. Wrong battery type can cause an explosion.

3. Keep product and batteries out of the reach of children and pets to avoid chewing and swallowing.

4. Product operating and storage temperature is from 0 degree Celsius to 40 degree Celsius. Under and over this temperature might affect the function.

5. Only use the original adaptor which are supplied with the model.

6. Never open the product: the device may contain parts with deadly voltage. To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.

7. Repairs or service should only be performed by qualified personnel.

8. Please notice that the standby button on the remote control only put the unit in standby.

9. The direct plug-in adapter is used as disconnect device, the disconnect device shall remain readily operable. So make sure there is space around the power outlet for easy access.

10. Do not expose to heat, water, moisture, direct sunlight!

11. To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.

Identification of Controls

Main Unit

1. SETUP
2. ENTER
3. EXIT
4. UP
5. DOWN
6. LEFT/VOL-
7. RIGHT/VOL+
8. AV IN
9. COAXIAL
10. Earphone Socket
11. 0N/OFF
12. DC IN 9-12V
13. ANT.
14. HDMI IN
15. USB

Remote control unite

1. POWER On/off the power supply
2. VOL -Adjust VOLUME.
3. 0-9 NUMBER BUTTON Selects numbered items in a menu.
4. SUBTITLE Press SUBTITLE repeatedly during playback to viwe a different subtitle languages , if avilable.
5. 200M JPEG: Use ZOOM to enlarge or shrink the picture. Each press of the ZOOM button change the TV screen
6. REC Record digital service.
7. ENTER Confirm and Enter
8. SETUP Main Menu/Return
9. FAV Open Favorite Programs List Menu
10. TV/RADIA0 Switch between TV and Radio source
11. EXIT
12. DISPLAY Display the information of the current signal
13. SOURCE Select DVB-T/HDMI/AV/MEDIA mode
14. VOL + Adjust VOLUME.
15. REPEAT Repeat Play mp3 and video
16. MUTE Mute the sound
17. AUDIO Press AUDIO repeatedly during playback to hear a different audio language or audio track, if avilable.
18. MODE Channel list
19. STOP
20. PLAY/PAUSE
21. RETURN
22. TTX
23. EPG (Electronic program guide) Show EPG information
24. IN BUTTON Previous option.
25. NH BUTTON Next option.
26. loo BUTTON Fast forward
27. . *4 BUTTON Fast backward
28. RED/GREEN/YELLOW/BLUE Some specific function

First Time Installation

After all connections have been made properly, switch on TV and make sure the receiver is connected to the Main Power. Press Power button to switch receiver on. If you are using the receiver for the first time or restored to Factory Default, the Main Menu will appear on your TV screen.

1. Select [OSD Language] and press RIGHT/LEFT key to select an language.
2. Select [Country] and press RIGHT/LEFT key to select your country of residence.
3. Select [Channel Search] and press RIGHT or OK key to begin Automatic channel search.
4. Once channel tuning is complete, you are now ready to watch TV.

Note:

1. If the device just show DENVER logo and cannot enter system, the battery may too low and you need to connect the charger and then turn on the device. The device will turn to standby mode if no operation over 10minutes. You can press power button to activate the device.
2. The TV are able to record programs onto an USB stick, but it cannot record subtitles.
   When you start recording, a timebar will be shown in the display. Push rec button once more to make the timebar disappear.

Setting

To access the SETUP menu,press SETUP on the remote control. The menu provides CHANNEL, PICTURE, SOUND, TIME, OPTION and LOCK settings. Select an option and press RIGHT/LEFT to adjust the settings.Press SETUP button o return to the setup menu or press EXIT to exit the menu.
CHANNEL
Press SETUP to enter into the Channel setup screen.

Auto Tuning
Select [Auto Tuning] and press ENTER to enter auto search screen. Choose the language and it will search channels automatically. To cancel channel search,press exit.
DTV Manual
Tuning Install new channels manually. This option adds new channels without changing the current channel list. Select [DTV Manual Tuning] and press ENTER to enter manual search screen. Press the RIGHT/LEFT key or input the number of the channel to select the channel frequency.Press ENTER to start searching channels. If a channel is found, it is saved and added to the channels list.
Programme Edit
Select [Programme Edit] to edit your program preference( delete/ rename/ skip/ favorite). Delete a TV or Radio Program/s

1. Select the Program and then press the RED button to delete the program.
2. Repeat the previous step to select more programs to delete.

Move a TV or Radio Program/s

1. Select the preferred program then press the YELLOW buton.
2. Press UP/DOWN to move the program.
3. Press ENTER to confirm.
4. Repeat the above steps to move more channels .

Skip TV or Radio Program/s

1. Select the program you would like to skip and press the BLUE button A skip symbol is displayed. The program is marked as a skip.
2. Repeat the previous step to select more programs.
3. To confirm and exit themenu,press EXIT key.Disable a skip TV or Radio Program: Press the BLUE button on the skip program with the skip symbol.
   Set Favourite Program/s You can create a shortlist of favourite programs that you can easily access.

Set Favourite TV or Radio program:

1. Select the preferred program then press the FAV button. A heart-shaped symbol will appear and the program is marked as a favour-ite.
2. Repeat the previous step to select more Favourite programs. Disable Favourite TV or Radio Program: Press the FAV buton on the Remote Control with the heart-shaped symbol.

View Favourite Programs:

1. Press the Fav button and the Favourite Menu will appear.
2. Press UP/DOWN to selest your Favourite Programs.
3. Press OK to select your favourite program.

Signal Information Select [Signal Information) and screen will show signal information.
Software Update(USB) Input U-disk with firmware,the device will detect the U-disk automatically.Choose yes to upgrade the firmware.
Picture
Press SETUP and RIGHT/LEFT key to enter into the Time setup screen. Select Picture to set the Picture Mode,Color Temperature,Aspect Ratio and Aspect Ratio.

Picture Mode: Standard(default)/Soft/UserNivid. Users can set picture contrast/brightness/color/sharpness by select User. Color Temperature: Medium(default)NVarm/User/Cool. User can set the colors of the screen by select User. Aspect Ratio: Auto, 4:3, 16:9(default), Zoom1, Zoom2, Panorama. Noise Reduction: Off, Low, Middle, High, Default.
SOUND
Press SETUP and RIGHT/LEFT key to enter into the SOUND setup screen. User can set sound mode, balance, auto volume, surround sound and SPDIF MODE.

TIME
Press SETUP and RIGHT/LEFT key to enter into the TIME setup screen. User can set Clock, Off Time, Sleep Timer, Auto Sleep and Time Zone here.

OPTION
Press SETUP and RIGHT/LEFT key to enter into the OPTION setup screen. User can set OSD language, audio language, subtitle language and re-store factory default here. The default language is English Note: If the language is not available, the program language will be used.
LOCK
Press SETUP and RIGHT/LEFT key to enter into the LOCK screen.

Lock System
User need to turn off the lock system before set pass word,block pro-gram and parental guidance. The original default pass word is ‘0000’.
Set Password
Set or change the password for locked programs. Enter your old password or default password ‘0000’, you will then be asked to enter your new password. To confirm re-enter your new password. Once it is confirmed, press EXIT to exit the menu.
Block Program/s
You can block selected programs for restricted view. Block a TV or Radio Program:

1. Set the lock system to on status.
2. Set new pass word.
3. Select [Block Program) and press ENTER button.Select the preferred program then press the GREEN button. A lock-shaped symbol is displayed. The program is now marked as locked.
4. Repeat the previous step to select more programs .
5. Press the GREEN button again to disable the locked program.

Parental Guidance
You can restrict access to channels that are unsuitable for children.

USB

Press the SOURCE button and select MEDIA.

Media
Switch to USB mode and plug in U-disk to view files (PHOTO, MUSIC, MOVIE, TEXT).

Technical Specifications

474-866MHz
RF Input level| -25–80dBm (64QAM) -10–75dBm (256QAM)
IF Bandwidth| 7MHz and 8MHz
Modulation| QPSK,16QAM,64QAM,256QAM
DVBT-T2| H.265
Video| Decoder Format| MPEG4 AVC/H.264 HP@L4
HEVC/H.265 HT@L4
MPEG2 MP@ML.HL
Input Pod| CVBS,HDMI,
Audio| Decoder Format| MPEG-1 (layer1&2&3)
Audio output port| Coaxial, earphone
Power| Voltage| DC 9-12V (1.5 A)
Working Power| ≤10W

Troubelshooting

the audio cable correctly
Sound on mute| Turn off mute function
Incorrect sound track| Try another sound track
Only sound, no image on the screen| No or incorrect connection with AV cable| Make sure cables are connected correctly
The program is a radio program| Press <TV/RADIO> key to shift into TV mode
Remote Control is not responding| The battery is exhausted| Change battery
Remote Control is not facing or close enough to the Set Top Box| Adjust the position of the Remote Control and move closer to the unit
The image stopped
suddenly or mosaic| The signal is too weak| Strengthen the signal
Manufacturer’s name or trade mark, commercial registration number and address| Shenzhen Run Sheng Feng Power Supply Techonolgy Co., Ltd commercial registration number: 91440300580068676U rd t 3 Floor, 4 Building, Zone A Xinfu Industrial Park, Chongqing Road, Fuyong Street, Bao’an District, Shenzhen, China
---|---
Model identifier| RSF-DY077B-1201500EU
Input voltage| 100-240V
Input AC frequency| 50b0Hz
Output voltage| 12V
Output current| 1.5A
Output power| 18W
Average active efficiency| 88.26% at 230V 50Hz
87.73% at 115V 60Hz
Efficiency at low load(10%)| 85.99% at 230V 50Hz
87.68% at 115V 60Hz
No-load power consumption| 0.07W at 230V 50Hz
0.04W at 115V 60Hz

Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S

denver.eu

warning Lithium battery inside

Electric and electronic equipment and included batteries contains materials, components and substances that chan be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately. As the end user it is important that you submit your used batteries to the approriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment.
All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.
Hereby, DENVER A/S declares that the radio equipment type LED-1033 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: denver.eu and then click the search ICON on topline of website. Write modelnumber: LED-1033. Now enter product page, and red directive is found under downloads/other downloads
Operating Frequency Range: 177.5-226.8MHz ,474-866MHz
DENVER A/S Omega 5A, Soeften DK-8382 Hinnerup Denmark www.facebook.com/denver.eu

https://eprel.ec.europa.eu/qr/1212110

Documents / Resources

| denver LED-1033 10.1 Inch Digital LED TV [pdf] User Manual
LED-1033 10.1 Inch Digital LED TV, LED-1033, 10.1 Inch Digital LED TV, Digital LED TV, LED TV, TV
---|---

References

• Denver A/S

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>