frisco 322629 Drop Down Door Bench Cat Litter Box Cover Instruction Manual
- June 9, 2024
- frisco
Table of Contents
frisco 322629 Drop Down Door Bench Cat Litter Box Cover
BEFORE ASSEMBLY
- Read all instructions and confirm all parts are included before starting assembly.
- Aside from the included parts, you’ll also need a Phillips head screwdriver. There are no power tools needed.
- Do not tighten all bolts and screws completely until the entire Litter Box Cover has been assembled and set up.
- Although this can be assembled by one person, we recommend enlisting a friend for easier assembly.
- To avoid misplacing hardware components, we recommend opening and placing hardware on the pan while assembling the Litter Box Cover.
OVERVIEW
PARTS INCLUDED
Prior to assembly, please be sure to identify and sort all parts shown below.
Pick a side! Determine which side you would like your entrance to be located, (we chose to put entrance on the right in this assembly). We suggest consulting with your kitty. (Panel G and Panel H are interchangeable)
NICE AND TIGHT? ALRIGHT!
After you double-check to make sure ALL cam locks are securely tightened, your stylish litter enclosure can be open for business!
WARNINGS AND CAUTIONS
Please read all warnings and instructions thoroughly before assembling.
- Grab a friend-it’s recommended that two people assemble this product.
- Assembly should be completed on a clean, level surface.
- Power tools are not recommended for assembly.
- Please handle all panels and hardware with care to avoid any damage.
- This litter box cover is intended for pet use only.
- Do not sit or stand on the assembled product.
CLEANING INSTRUCTIONS
Spot clean with a damp cloth as needed.
Tip: To protect against messes, we recommend placing a potty pad under the
litter box.
QUESTIONS?
CALL OUR FRIENDLY CUSTOMER SERVICE TEAM ANYTIME.
WE’RE HERE 24/7! 1-800-67-CHEWY (672-4399)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>