RC4WD Z-B0126 Black Hawk Body Set User Manual

June 9, 2024
RC4WD

RC4WD Z-B0126 Black Hawk Body Set User Manual
RC4WD Z-B0126 Black Hawk Body Set

RECOMMENDED TOOLS

HEX DRIVERS

BODY REAMER

SIDE CUTTERS

LONG NOSE PLIERS

Instruction Manual Symbols Key

THRED LOCK

TRIM WITH HOBBY KNIFE

SCISSORS

REPEAT

BUILD RIGHT AND LEFT

FRONT AND REAR

Tips for Assembly

  • Use good quality hex drivers to avoid stripping screw heads.
  • Open kit bags in order of assembly steps.
  • Use “Step” index for quantity and size of hardware to be used for assembly step.
  • Do not overtighten screws.
  • Use thread lock sparingly.
  • We recommend using Foam Safe CA glue or a plastic solvent glue.

Warranty

RC4WD non-electrical products are warranted to be free of defects in materials and workmanship when new. Our limited warranty does not coverdamages due to normal wear and tear, user error of assembly or installation, user modifications, user’s failure to perform routine maintenance, addition of aftermarket parts or option parts. This warranty lasts 30 days after arrival for original purchaser. In the event of a defect under this warranty, RC4WD will, at our discretion, replace the product, provided ourinspection indicates that an original defect exists. RC4WD reserves the right to replace any product which is no longer available with a product of comparable value and function. If RC4WD determines the repair is not covered under warranty guidelines, we will contact you to discuss your options. If you have any questions, please contact us via email at support@rc4wd.com. RC4WD warranties its electronics for 30 days from date of arrival. This covers all electrical items except items that are already noted on the individual producT.

Step 1

PRODUCT OVERVIEW

Step 2

PRODUCT OVERVIEW

Step 3

PRODUCT OVERVIEW

Step 4

150-0217 M2.5 x 6mm BHSTS X

INSTALLATION

Step 5

INSTALLATION

Step 6

INSTALLATION

Step 7

INSTALLATION

Step 8

INSTALLATION

Step 9

INSTALLATION

Step10

INSTALLATION

Step11

INSTALLATION

Step12

INSTALLATION

Step13
Holes may require body reamer. Take care to not force the pegs in holes as this may break them off

INSTALLATION

Step14
Holes may require body reamer. Take care to not force the pegs in holes as this may break them off. Holes may require body reamer. Take care to not force the pegs in holes as this may break them off.

INSTALLATION

Step15
Holes may require body reamer. Take care to not force the pegs in holes as this may break them off.

INSTALLATION

Step16

PRODUCT OVERVIEW

Optional Parts

Partes opcionales / Pièces en option / Optionale teile

Z-E0102 LED Basic Lighting System for 1/18 Black Hawk Body Set

LOGO

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals