RC4WD 1985 Toyota 4Runner Hard Body Complete Set Owner’s Manual

RC4WD 1985 Toyota 4Runner Hard Body Complete Set

Recommended Tools

Instruction Manual Symbols Key

Tips for Assembly

• Use good quality hex drivers to avoid stripping screw heads.
• Open kit bags in order of assembly steps.
• Use “Step” index for quantity and size of hardware to be used for assembly.
• Do not overtighten screws.
• Use thread lock sparingly

Recommendations for building your RC4WD 1985 Toyota 4Runner Hard Body Complete Set.

1. Carefully remove all pieces from parts trees with a hobby knife or side cutters. Take care to trim the injection point from the parts.
2. Test fit everything before gluing. Many areas will require extra attention to detail to ensure proper alignment.

Warranty

RC4WD non-electrical products are warranted to be free of defects in materials and workmanship when new. Our limited warranty does not cover damages due to normal wear and tear, user error of assembly or installation, user modifications, user’s failure to perform routine maintenance, the addition of aftermarket parts or option parts. This warranty lasts 30 days after arrival for the original purchaser.

In the event of a defect under this warranty, RC4WD will, at our discretion, replace the product, provided our inspection indicates that an original defect exists. RC4WD reserves the right to replace any product which is no longer available with a product of comparable value and function. If RC4WD determines the repair is not covered under warranty guidelines, we will contact you to discuss your options. If you have any questions, please contact us via email at support@rc4wd.com.

RC4WD warranties its electronics for 30 days from date of arrival. This covers all electrical items except items that are already noted on the individual product page.

Parts List

Installation

Step 1

• X2 150-0207 M1.6 x 10mm Self Tapping Screws

• X2 150-0300 M1.6 x 12mm Self Tapping Screws

• Pre-screw the holes in the inner mounts. This will make installing the brackets much easier.

• Use Tamiya Translucent Paint in the areas labeled with colors on the lights.

Step 2

X4 150-0238 M2 x 6mm Self Tapping Screws
*Recommend styrene solvent glue.

Step 3
Recommend foam-safe super glue or Shoe Goo or E6000.

Step 4

X4 150-0238 M2 x 6mm Self Tapping Screws

Step 5
Recommend styrene solvent glue or Foam Safe Super Glue.

Step 6
Recommend foam safe super glue or Shoe Goo orE6000.

Step 7
Recommend foam-safe super glue or Shoe Goo or E6000.

Step 8

X4 150-0238 M2 x 6mm Self Tapping Screws
*Locking posts are designed for a very snug fit when the tailgate is closed. These may be trimmed slightly to allow the tailgate to open more easily if desired.

Step 9
X4 150-0238 M2 x 6mm Self Tapping Screws

Step 10

X2 150-0238 M2 x 6mm Self Tapping Screws

Step 11
*Do not glue until proper alignment is achieved in Step 12.

Step 12

X6 150-0238 M2 x 6mm Self Tapping Screws

• After proper alignment of bumper is achieved, glue 325-0913 in place.
• Recommend foam-safe super glue or Shoe Goo or E6000.

Step 13

X4 150-0002 M2 x 4mm SHCS

Step 14

X2 150-0208 M3 x 6mm Self Tapping Screws

Step 15
X2 150-0208 M3 x 6mm Self Tapping Screws

Step 16

X6 150-0237 M2 x 5mm Self Tapping Screws

Step 17

• Recommend styrene solvent glue or Foam Safe Super Glue.
• Use Tamiya Translucent Paint in the areas labeled with colors on the lights.

Step 18

• Recommend styrene solvent glue or Foam Safe Super Glue.
• Recommend Shoe Goo or E6000 for the emblem.
• Use Tamiya Translucent Paint in the areas labeled with colors on the lights.

Step 19

X4 150-0238 M2 x 6mm Self Tapping Screws
X2 150-0208 M3 x 6mm Self Tapping Screws

Step 20

X1 150-0196 M3 x 10mm Self Tapping Screws

Step 21

Step 22

X4 150-0255 M2 x 5mm Self Tapping Screws

Step 23

*Install Chrome Mirror Stickers 101-0074.

Step 24
*Recommend foam safe super glue or Shoe Goo or E6000.

Step 25

Recommend styrene solvent glue or Foam Safe Super Glue.

Step 26

X2 150-0239 M3 x 4mm Self Tapping Screws

Step 27
*Glue the magnet in place with Shoe Goo or E6000.

Step 28
Recommend styrene solvent glue or Foam Safe Super Glue.

Step 29

X4 150-0195 M3 x 8mm Self Tapping Screws

Step 30

*Recommend 2 part epoxy or E6000 glue.

Step 31

• Recommend styrene solvent glue or Foam Safe Super Glue.
• Install Chrome Mirror Stickers 101-0074.

Step 32

X2 150-0002 M2 x 4mm SHCS

Step 33

Recommend styrene solvent glue or Foam Safe Super Glue.

Step 34
Recommend styrene solvent glue or Foam Safe Super Glue.

Step 35

• Recommend styrene solvent glue or Foam Safe Super Glue.
• Seats can be glued in place permanently. For easy removal, do not glue as the seats snap lightly into place.

Step 36

• Recommend styrene solvent glue or Foam Safe Super Glue.
• Note installation of dashboard stickers

Step 37

X2 150-0195 M3x8mm
Self Tapping Screws

Step 38

X4 150-0208 M3 x 6mm Self Tapping Screws
X2 150-0064 M3 x 6mm BHCS

Step 39

X2 150-0208 M3 x 6mm Self Tapping Screws
X2 150-0195 M3 x 8mm Self Tapping Screws
*Recommend foam safe super glue or Shoe Goo or E6000.

Step 40
Recommend styrene solvent glue or Foam Safe Super Glue.

Step 41
Recommend styrene solvent glue or Foam Safe Super Glue.

Step 42
X4 150-0238 M2 x 6mm Self Tapping Screws

Step 42

How to Install Body Decals

Step 43

Step 44

X4 150-0253 M3 x 10mm FHCS

Step 45

Step 46
X2 150-0064 M3x12mm BHCS
X2 150-0065 M3x14mm BHCS

Step 47

X4 150-0063 M3 x 10mm BHCS
X2 150-0099 M3 x 6mm FHCS

Step 48

X2 150-0100 M3 x 8mm FHCS

Step 49
X4 150-0099 M3 x 6mm FHCS

Step 50
X3 150-0063 M3 x 10mm BHCS
*Servo removal is only needed if you have a 2 speed transmission.

Step 51

X4 150-0195 M3 x 8mm Self Tapping Screws

Step 52

www.rc4wd.com

720 N. Gateway St.
Visalia, CA 93291
Web: www.rc4wd.com – Email: support@rc4wd.com

References

• rc4wd.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>