RC4WD Z-RTR0066 Trail Finder Chevrolet Scottsdale Hard Body Set Owner’s Manual

RC4WD Z-RTR0066 Trail Finder Chevrolet Scottsdale Hard Body Set

RECOMMENDED TOOLS

TIPS FOR ASSEMBLY

1. USE QUALITY HEX DRIVERS TO AVOID STRIPPING SCREW HEADS.
2. USE THREAD LOCK WHEN PUTTING METAL SCREWS INTO METAL PARTS.
3. NOTE: STEPS MARKED WITH AN ASTERISK (*) REQUIRE THREAD LOCK.
4. USE THREAD LOCK SPARINGLY.
5. DO NOT OVER TIGHTEN SCREWS OTHERWISE YOU MAY STRIP THE THREAD.

WARRANTY

RC4WD non-electrical products are warranted to be free of defects in materials and workmanship when new. Our limited warranty does not cover damages due to normal wear and tear, user error of assembly or installation, user modifications, user’s failure to perform routine maintenance, addition of aftermarket parts or option parts. This warranty lasts 30 days after arrival for original purchaser.

In the event of a defect under this warranty, RC4WD will, at our discretion, replace the product, provided our inspection indicates that an original defect exists. RC4WD reserves the right to replace any product which is no longer available with a product of comparable value and function. If RC4WD determines the repair is not covered under warranty guidelines, we contact you to discuss your options. If you have any questions, please contact us via email at support@rc4wd.com.  RC4WD warranties its electronics for 30 days from date of arrival. This covers all electrical items except items that are alreadynoted on the individual product page.

FCC & REGULATORY COMPLIANCE

FCC Compliance: This device contains a module that complies with the limits for a Class B digital device as described in part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The limits for a Class B digital device are designed to provide reasonable protection against harmful interference in resident ial settings. This product generates, uses and can radiate radio frequency energy, and, if not operated in accordance with the instructions, may cause harmful interference to radio communications. The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Canada, Industry Canada (IC): This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: This device may not cause interference, and This device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency (RF) Exposure Statement: This equipment complies with radio frequency exposure limits set forth by FCC and Industry Canada for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body or bystanders and must not be co-located or operating in conjunction with any other antenna or transmitter.

This model is not intended for use by children under 14 years of age without the supervision of a responsible and knowledgeable adult.

1. Operational Frequency of the device: 2.41-2.48 Mhz.
2. Maximum Radio Frequency Power: <20Ddbm

Safety Information

Failure to operate your model in a safe and responsible manner may result in property damage and serious injury. The precautions outlined in this manual should be strictly followed to help ensure safe operation.
You alone must see that the instructions are followed and the precautions are adhered to.

Important Points to Remember

• • Your model is not intended for use on public roads or congested areas where its operation can conflict with or disrupt pedestrian or vehicular traffic.
  • Never, under any circumstances, operate the model in crowds of people. Your model could cause injury if allowed to collide with anyone.
  • Because your model is controlled by radio, it is subject to radio interference from many sources that are beyond your control. Since radio interference can cause momentary loss of radio control, always allow a safety margin in all directions around the model in order to prevent collisions.
  • The motor, battery, and speed control can become hot during use. Be careful to avoid getting burned.
  • Don’t operate your model at night, or anytime your line of sight to the model may be obstructed or impaired in any way.
  • Most importantly, use good common sense at all times.

Speed Control
Your model’s electronic speed control (ESC) is an extremely powerful electronic device capable of delivering high current. Please closely follow these precautions to prevent damage to the speed control or other components.

• • Disconnect the Battery: Always disconnect the battery from the speed control when not in use.
  • Insulate the Wires: Always insulate exposed wiring with heat shrink tubing to prevent short circuits.
  • 6-7 NiMH cells or 2-3 LiPo cells (2s/3s): The ESC can accept a maximum input voltage of 8.4 volts (NiMH) or 11.1 volts (3s LiPo). Always adhere to the minimum and maximum limitations of the ESC as stated in the specifications table.
  • Transmitter on First: Switch on your transmitter first before switching on the speed control to prevent runaways and erratic performance.
  • Don’t Get Burned: The ESC and motor can become extremely hot during use, so be careful not to touch them until they cool. Supply adequate airflow for cooling.
  • Use the Factory-Installed Connectors: Do not change the battery and motor connectors. Improper wiring can cause fire or damage to the ESC.
  • No Reverse Voltage: The ESC is not protected against reverse polarity voltage.

Recycling RC4WD 6-Cell 3000mAh NIMH Battery Pack
RC4WD strongly encourages you to recycle RC4WD 6-Cell 3000mAh NIMH Battery Pack batteries when they reach the end of their useful life. Do not throw batteries in the trash. All RC4WD 6-Cell 3000mAh NIMH Battery Packs display the RBRC (Rechargeable Battery Recycling Corporation) icon, indicating they are recyclable. To find a recycling center near you, ask your local hobby dealer or visit www.call2recycle.org.

Your model is able to use LiPo batteries.
Charging and discharging batteries has the potential for fire, explosion, serious injury, and property damage if not performed per the instructions. Before use, read and follow all manufacturer’s instructions, warnings, and precautions. In addition, Lithium Polymer (LiPo) batteries pose a SEVERE risk of fire if not properly handled per the instructions and require special care and handling procedures for long life and safe operation. LiPo batteries are intended only for advanced users that are educated on the risks associated with LiPo battery use. RC4WD does not recommend that anyone under the age of 14 use or handle LiPo battery packs without the supervision of a knowledgeable and responsible adult. Dispose of used batteries according to the instructions.
Tip: To unlock the full potential of your RC4WD electronics, switch to a 3S LiPo battery!

Important Warnings for users of Lithium Polymer (LiPo) batteries:

• LiPo batteries have a minimum safe discharge voltage threshold that should not be exceeded. The electronic speed control is equipped with built-in Low-Voltage Detection that stops the vehicle when LiPo batteries have reached their minimum voltage (discharge) threshold. It is the driver’s responsibility to stop immediately to prevent the battery pack from being discharged below its safe minimum threshold.
• Low-Voltage Detection is just one part of a comprehensive plan for safe LiPo battery use. It is critical to follow all instructions for safe and proper charging, use, and storage of LiPo batteries. Make sure you understand how to use your LiPo batteries. If you have questions about LiPo battery usage, please consult with your local hobby dealer or contact the battery manufacturer. As a reminder, all batteries should be recycled at the end of their useful life.
• ONLY use a Lithium Polymer (LiPo) balance charger with a balance adapter port to charge LiPo batteries. Never use NiMH or NiCad type chargers or charge modes to charge LiPo batteries. DO NOT charge with a NiMH-only charger. The use of a NiMH or NiCad charger or charge mode will damage the batteries and may cause fire and personal injury.
• NEVER charge LiPo battery packs in series or parallel. Charging packs in series or parallel may result in improper charger cell recognition and an improper charging rate that may lead to overcharging, cell imbalance, cell damage, and fire.
• ALWAYS inspect your LiPo batteries carefully before charging. Look for any loose leads or connectors, damaged wire insulation, damaged cell packaging, impact damage, fluid leaks, swelling (a sign of internal damage), cell deformity, missing labels, or any other damage or irregularity. If any of these conditions are observed, do not charge or use the battery pack. Follow the disposal instructions included with your battery to properly and safely dispose of the battery.
• DO NOT store or charge LiPo batteries with or around other batteries or battery packs of any type, including other LiPos.
• Store and transport your battery pack(s) in a cool dry place. DO NOT store in direct sunlight. DO NOT allow the storage temperature to exceed 140°F or 60°C, such as in the trunk of a car, or the cells may be damaged and create a fire risk.
• DO NOT disassemble LiPo batteries or cells.
• DO NOT attempt to build your own LiPo battery pack from loose cells.

Charging and handling precautions for all battery types:

• BEFORE you charge, ALWAYS confirm that the charger settings exactly match the type (chemistry), specification, and configuration of the battery to be charged.
• DO NOT attempt to charge non-rechargeable batteries (explosion hazard), batteries that have an internal charge circuit or a protection circuit, batteries that have been altered from original manufacturer configuration, or batteries that have missing or unreadable labels, preventing you from properly identifying the battery type and Specifications.
• DO NOT exceed the maximum manufacturer recommended charge Rate.
• DO NOT let any exposed battery contacts or wires touch each other. This will cause the battery to short circuit and create the risk of fire.
• While charging or discharging, ALWAYS place the battery (all types of batteries) in a fire retardant/fire proof container and on a non-flammable surface such as concrete.
• DO NOT charge batteries inside of an automobile. DO NOT charge batteries while driving in an automobile.
• NEVER charge batteries on wood, cloth, carpet, or on any other flammable material.
• ALWAYS charge batteries in a well-ventilated area.
• REMOVE flammable items and combustible materials from the charging area.
• DO NOT leave the charger and battery unattended while charging, discharging, or anytime the charger is ON with a battery connected. If there are any signs of a malfunction or in the event of an emergency, unplug the charger from the power source and disconnect the battery from the charger.
• DO NOT operate the charger in a cluttered space, or place objects on top of the charger or battery.
• If any battery or battery cell is damaged in any way, DO NOT charge, discharge, or use the battery.
• Keep a Class D fire extinguisher nearby in case of fire.
• DO NOT disassemble, crush, short circuit, or expose the batteries to flame or other source of ignition. Toxic materials could be released. If eye or skin contact occurs, flush with water.
• If a battery gets hot to the touch during the charging process (temperature greater than 110°F / 43°C), immediately disconnect the battery from the charger and discontinue charging.
• Allow the battery pack to cool off between runs (before charging).
• ALWAYS unplug the charger and disconnect the battery when not in use.
• ALWAYS unplug the battery from the electronic speed control when the model is not in use and when it is being stored or transported.
• DO NOT disassemble the charger.
• REMOVE the battery from your model or device before charging.
• DO NOT expose the charger to water or moisture.
• ALWAYS store battery packs safely out of the reach of children or pets. Children should always have adult supervision when charging and handling batteries.
• Nickel-Metal Hydride (NiMH) batteries must be recycled or disposed of properly.
• Always proceed with caution and use good common sense at all times.

RC4WD Trail Finder 2

RC4WD Trail Finder 2 “LWB” RTR W/ Chevrolet K10 Scottsdale Hard Body Set（Red & Black) Electronic Manual.

This is a step by step overview of your new RC4WD Trail Finder 2 “LWB” RTR W/ Chevrolet K10 Scottsdale Hard Body Set（Red & Black) electrical items and how they connect.

Items Shown:

• Z-E0004 540 Crawler Brushed Motor 45T
• Z-E0035 Twister High Torque Metal Gear Digital Servo
• Z-E0113 Outcry III Waterproof ESC
• Z-R0009 XR3 3-Channel 2.4Ghz Transmitter/Receiver Radio

Optional Parts:

• Z-E0001 540 Crawler Brushed Motor 80T
• Z-E0002 540 Crawler Brushed Motor 65T
• Z-E0003 540 Crawler Brushed Motor 55T
• Z-E0005 540 Crawler Brushed Motor 35T
• Z-E0065 540 Crawler Brushed Motor 20T
• Z-E0067 540 Crawler Brushed Motor 27T
• Z-E0125 Twister Extreme Hi-Voltage Coreless Metal Gear Digital Waterproof Servo
• Z-R0008 XR3 2.4Ghz 4-Channel XR4 2.4Ghz Blue Receiver

RC4WD Outcry III Waterproof ESC

BASIC SPECIFICATIONS

SIZE SPECIFICATIONS

OVERVIEW

FEATURES

• Water-proof and dust-proof, suitable for all-weather conditions.
• Small size with built-in capacitor module.
• Three running modes: Fwd/Br, Fwd/Rev/Br and Fwd/Rev, fits for various vehicles. Note 1: Fwd =Forward, Br=Brake, Rev=Reverse.
• Great current endurance capability.
• Great built-in BEC output capacity.
• Automatic throttle range calibration, easy to use.
• ESC parameters can be easily changed by changing the jumper pins.
• Multiple protections: Low voltage cut-off protection for battery / Over-heat protection / Throttle signal loss protection.

INSTRUCTION

1. Battery & Operating mode

   • How to Set Parameters
   1. Outcry III ESC uses jumper caps to set running mode & battery type.
      We suggest users using tweezers or needle-nose pliers to set parameters by plugging / unplugging the jumper cap (as shown in the picture above); For example, if you want set the battery type to the “LiPo” mode, you only need to plug the jumper cap into left two pins of the battery pin header.
   • Programmable ltems

   1. Running Mode: 3 Options (Fwd / Br / Rev, Fwd / Br, Fwd / Rev). The “Fwd / Br / Rev” is the default option.
      Fwd=Forward, Br=Brake, Rev=Reverse
      “Fwd / Br / Rev” mode indicates the vehicle can go forward, backward and brake. This mode uses “Double-click” method to make the vehicle reverse. When moving the throttle Trigger/Stick from the neutral Reverse Position for the 1st time, the ESC begins to brake the motor and the motor slows down but is still running, so the reverse is NOT performed immediately. When the throttle Trigger/Stick is moved to the Reverse Position again, if the motor speed slows down to zero (i.e. stopped), the vehicle will move in reverse. This “Double- click” method prevents reversing immediately when the brake function is frequently used in steering. Therefore, this mode is often used in daily practice. “Fwd / Br” mode, the vehicle can go forward and brake, but no reversing, so this mode is often used in competitions. “Fwd / Rev” mode uses “Single-click” method to make the vehicle reverse. When moving the throttle Trigger/Stick from neutral zone to backward zone, the vehicle reverses immediately, so this mode is usually used for rock crawlers.

   2. Battery Type: 2 Options (Lipo, NiMH), the “Lipo” is the default option.

   • Protection Features
   1. Low Voltage Cutoff Protection (LVC): If the voltage of battery pack is lower than the threshold for 2 seconds, the ESC will enter protection mode, so the motor speed will be lowered (when voltage is lower than the 1st trigger point) till stopped (when voltage is lower than the 2nd trigger point). When the car stops, the red LED blinks to indicate the low voltage cut-off protection has been activated.
   • 2S Lipo: When the voltage is below 6.5V, the output power will be halved. When the voltage is lower than 6.0V, the output will be cut off and won’t be resumed again.
   • 3s Lipo: When the voltage is below 9.75V, the output power will be halved. When the voltage is lower than 9.0V, the output will be cut off and won’t be resumed again
   • 5-9S Lipo: When the voltage is below 4.5V, the output power will be halved. When the voltage is lower than 4.0V, the output will be cut off and won’t be resumed again.
   2. Over-heat Protection: When the internal temperature of the ESC is higher than 100 degrees Celsius, or 211 degrees Fahrenheit, this protection will be activated and the output power will be reduced until cut off. The RED LED blinks when the vehicle stops, and the ESC will not resume output power until its temperature is below 80 Celsius degrees or 176 degrees Fahrenheit.
   3. Throttle signal loss protection: The ESC will cut off the output power if the throttle signal has been lost for 0.1 second. The “Fail-Safe” function of the radio system is strongly recommended to be activated.

IMPORTANT NOTES

1. Prior to proceeding, be sure to either remove the pinion from the motor or elevate the truck so the wheels are not able to touch the ground.
2. Do not touch this product while in use to avoid injury. Product emits heat and thus, the heatsink may become extremely hot.
3. This product is waterproof. Product will be functional in up to 10cm of water for 2 hours.
4. For optimal performance, switch to a 3S LiPo battery!

3CH Transmitter / Radio

Step 1. Transmitter and Receiver Overview

Step 2. Receiver and Servo Connection

Step 3. Installing the Batteries

Step 4. Binding the Transmitter and Receiver

Step 5. Fail Safe Function Settings

1. Set the TH, ST switches to the norm position.
2. 2. Turn on the transmitter and receiver.
3. Press the F/S SET button, the LED on the receiver should start flashing rapidly.
4. Put the throttle trigger in the break position, press the F/S SET button. The LED should become solid.
5. For Electric Model, Put the throttle trigger in the stop setting.position when you are adjusting the setting.

Step 6. Transmitter Adjustments

INSTALLATION

Now it’s time to go hit the trails and have fun! Be sure to take photos and tag @rc4wd on social media, we would love to see what adventures you take!

OPTIONAL DECAL PLACEMENT

REPLACEMENT PARTS

• Z-A0101: K44 Ultimate Scale Cast Front Axle
• Z-A0096: K44 Ultimate Scale Cast Rear Axle
• Z-B0124: RC4WD Chevrolet Blazer Chrome Front Grille w/Optional Inserts
• Z-B0029: Trail Finder 2 Plastic Body Posts
• Z-B0094: RC4WD Chevrolet Blazer and K10 Chrome Grill and Bumper Parts Tree
• Z-B0096: RC4WD Chevrolet Blazer and K10 Clear Lenses Parts Tree
• Z-B0098: RC4WD Chevrolet Blazer and K10 Hood and Tailgate Parts Tree
• Z-B0100: RC4WD Chevrolet Blazer and K10 Seats, Steering Column Parts Tree
• Z-B0102: RC4WD Chevrolet Blazer and K10 Interior Panels Parts Tree
• Z-B0104: RC4WD Chevrolet Blazer and K10 Chrome Handles and LED Holder Parts Tree
• Z-B0106: RC4WD Chevrolet Blazer and K10 Chrome Mirror and Rear Taillight Parts Assembly
• Z-B0108: RC4WD Chevrolet Blazer and K10 Accessory Parts Tree
• Z-B0114: RC4WD Chevrolet Blazer Main Cab Clear Window Parts Tree
• Z-D0045: Super Scale 70mm White Shocks with Internal Springs
• Z-E0004: 540 Crawler Brushed Motor 45T
• Z-E0020: RC4WD LED Basic Lighting System for Chevrolet Blazer and K10
• Z-E0035: Twister High Torque Metal Gear Digital Servo
• Z-E0090: RC4WD 6-Cell 3000mAh NIMH Battery Pack
• Z-E0106: RC4WD Universal NIMH Peak Battery Charger
• Z-E0113: Outcry III Waterproof ESC
• Z-R0009: XR3 3-Channel 2.4Ghz Transmitter/Receiver Radio
• Z-S0047: Leaf Spring Shackles & Mounts Kit
• Z-S0298: RC4WD Rally 1/10 Locking Wheel Hubs
• Z-S0398: M3 Mini Plastic Rod End (20x)
• Z-S0401: M3 Offset Short Plastic Rod End (20x)
• Z-S0504: 101mm Hardened Steering Link
• Z-S0552: Heavy Duty Nylon Strap Lock (5)
• Z-S0592: Fuel Cell Radio Box
• Z-S0822: Heavy Duty Metal Servo Arm 25t Futaba
• Z-S1718: RC4WD AA Batteries
• Z-S1729: Front Inner Fender Set for Chevy Blazer
• Z-S1730: RC4WD Marlin Crawler Side Plastic Sliders for TF2 LWB
• Z-S1815: Super Soft Flex Leaf Springs for TF2 (4)
• Z-S2020: RC4WD Plastic Punisher Shaft V2 (102mm-110mm / 4.02″ – 4.33″) 5mm Hole
• Z-S2221: RC4WD Small Block V8 Engine Bay for Chevrolet Blazer and K10
• Z-U0024: Hammer Transfer Case (1.47/1)
• Z-U0028: R3 Scale Single Speed Transmission
• Z-W0257: Rally 1.9″ Beadlock Wheels (Silver)

OPTIONAL PARTS

• Z-A0080: Yota II Ultimate Scale Cast Axle (Front)
• Z-A0081: Yota II Ultimate Scale Cast Axle (Rear)
• Z-D0034: RC4WD 70mm Old Man Emu Nitrocharger Sport Shocks by ARB
• Z-D0083: RC4WD Bilstein SZ Series 70mm Scale Shock Absorbers
• Z-E0001: 540 Crawler Brushed Motor 80T
• Z-E0002: 540 Crawler Brushed Motor 65T
• Z-E0003: 540 Crawler Brushed Motor 55T
• Z-E0005: 540 Crawler Brushed Motor 35T
• Z-E0020: RC4WD LED Basic Lighting System for Chevrolet Blazer and K10
• Z-E0022: RC4WD KC HiLiTES Daylighter Light Set V2
• Z-E0036: RC4WD KC HiLiTES KC Light Set V2
• Z-E0041: RC4WD Brushed 45T Boost Rebuildable Crawler 540 Motor
• Z-E0045: RC4WD Brushed 35T Boost Rebuildable Crawler 540 Motor
• Z-E0052: RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (20MM/0.75″)
• Z-E0054: RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (40mm/1.5″)
• Z-E0055: RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (75mm/3″)
• Z-E0059: RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (100mm/4″)
• Z-E0064: RC4WD 1/10 Baja Designs S8 LED Light Bar (100mm)
• Z-E0065: 540 Crawler Brushed Motor 20T
• Z-E0066: RC4WD 1/10 Baja Designs Squadron Pro LED Lights
• Z-E0067: 540 Crawler Brushed Motor 27T
• Z-E0076: RC4WD 1/10 Baja Designs S8 LED Light Bar (120mm)
• Z-E0095: RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (120mm/4.72″)
• Z-E0112: RC4WD ARB Intensity LED Light Set
• Z-E0115: Baja Designs Arc Light Bar for Chevrolet Blazer
• Z-E0118: Outcry Extreme Speed Controller ESC w/ Program Card
• Z-E0125: Twister Extreme Hi-Voltage Coreless Metal Gear Digital Waterproof Servo
• Z-E0132: RC4WD KC HiLiTES Rectangle Lights with Covers
• Z-G0014:  15t 32p Hardened Steel Pinion Gear
• Z-G0048: 60t Delrin Spur Gear for AX2 2 Speed Transmission
• Z-G0059: Helical Gear Set for 1/10 Yota and K44 Axles
• Z-G0064: 56T 32P Delrin Spur Gear
• Z-G0065: 12t 32p Hardened Steel Pinion Gear
• Z-G0066: 18t 32p Hardened Steel Pinion Gear
• Z-G0068: 52T 32P Delrin Spur Gear
• Z-R0006: XR4 4-Channel 2.4Ghz Transmitter/Receiver Radio
• Z-S0013: RC4WD Roll Bar for Chevrolet Blazer and K10
• Z-S0358: Truck Bed Mount Angled Spare Tire Carrier
• Z-S0451: RC4WD Tough Armor Double Tube Rear Bumper for Chevrolet Blazer and K10
• Z-S0456: RC4WD Tough Armor Double Tube Front Bumper for Chevrolet Blazer and K10
• Z-S0518: Soft Steel Leaf Springs for Trail Finder 2
• Z-S0522: Punisher Shaft II (90mm – 120mm / 3.54″ – 4.72″) 5mm F-350 Hi-Lift
• Z-S0588: Chubby 6 TON Scale Jack Stands
• Z-S0759: 1/10 Bed Mounted Tire Carrier
• Z-S0789: RC4WD Work Rack for Chevrolet K10 Scottsdale Hard Body Complete Set
• Z-S0850: RC4WD Mickey Thompson Metal Series 1/10 Wheel Center Caps
• Z-S1087: Scale Steel Punisher Shaft V2 (100mm – 130mm / 3.94” – 5.12”)
• Z-S1093: RC4WD Billet Aluminum Fuel Cell Radio Box (Black)
• Z-S1118: Scale Steel Punisher Shaft V2 (90mm – 115mm / 3.54” – 4.53”)
• Z-S1122: RC4WD Billet Aluminum Fuel Cell Radio Box (Red)
• Z-S1302: 1/10 Sleeping Mat w/Straps (Black)
• Z-S1317: RC4WD ARB 1/10 Fridge Freezer
• Z-S1526: RC4WD 1/10 Hi-Lift Jack
• Z-S1564: RC4WD Chevrolet Blazer Functional Hood and Tailgate Hardware
• Z-S1587: RC4WD Teraflex Revolver Z-Box for Trail Finder, F-350, Hilux, Tundra
• Z-S1594: RC4WD Teraflex Revolver Shackle
• Z-S1612: RC4WD 1/10 Wooden Shipping Case
• Z-S1729: Front Inner Fender Set for Chevy Blazer
• Z-S1765: Garage Series Cooler
• Z-S1774: RC4WD 1/10 Hi-Lift Extreme Jack
• Z-S1831: RC4WD MAXTRAX Vehicle Extraction and Recovery Boards 1/10 (Black)
• Z-S1839: RC4WD ARB Diff Cover for K44 Cast Axle
• Z-S1863: Tough Armor Rear Bumper with Hitch Mount for Chevy Blazer / TF2
• Z-S1865: Scale Garage Series 1/10 Chainsaw
• Z-S1872: Tough Armor Tube Roll Bar w/Rear Tire Mount for Chevy Blazer Body Set
• Z-S1949: RC4WD Rancho Adjustable Steering Stabilizer (70-100mm)
• Z-S1958: Tough Armor Tube Rear Bumper for TF2 Blazer
• Z-S2017: Fender Flares for RC4WD Chevy Blazer Body Set
• Z-S2091: RC4WD Poison Spyder RockBrawler II Rear Bumper W/ Tire Carrier for TRX-4 and RC4WD Blazer
• Z-T0004: Mud Plugger 1.9″ Scale Tires
• Z-BT0005: Dirt Grabber 1.9″ All Terrain Tires
• Z-T0034: RC4WD Dick Cepek 1.9″ Mud Country Scale Tires
• Z-T0049: Rock Creepers 1.9″ Scale Tires
• Z-T0051: Mud Thrashers 1.9″ Scale Tires
• Z-T0060: RC4WD Mickey Thompson 1.9″ Baja Claw 4.19″ Scale Tires
• Z-T0061: RC4WD Mickey Thompson 1.9″ Baja Claw 4.19″ Scale Tires
• ZB-T0086: Prowler XS Scale 1.9″ Tires
• Z-T0119: RC4WD Dick Cepek FC-II 1.9″ Tire
• Z-T0154: RC4WD Atturo Trail Blade X/T 1.9″ Scale Tires
• Z-T0192: RC4WD BFGoodrich Mud Terrain T/A KM3 1.9″ Tires
• Z-T0193: RC4WD Michelin Agilis C-Metric 1.9″ Tires
• Z-W0122: RC4WD Enforcer 1.9″ Beadlock Wheels
• Z-W0127: 5 Lug Wagon 1.9″ Steel Stamped Beadlock Wheels (White)
• Z-W0151: JK 1.9″ Scale Beadlock Wheels
• Z-W0200: RC4WD Fuel Offroad Maverick 1.9″ Beadlock Wheels
• Z-W0238: RC4WD Mickey Thompson Street Comp SC-5 1.9″ Beadlock Wheels (Hyper Silver)
• Z-W0249: RC4WD Mickey Thompson MT Metal Series MM-164M 1.9″ Wheels
• Z-W0261: RC4WD Ballistic Off Road Rage 1.9” Beadlock Wheels
• Z-W0274: RC4WD 1911 1.9” Beadlock Wheels
• Z-W0294: RC4WD Fuel Zephyr Beadlock Wheels 1.9″
• Z-W0296: Classic 10-Hole Chrome 1.9″ Beadlock Wheels
• Z-W0306: RC4WD Dirty Life MB 1.9″ Beadlock Wheels
• Z-W0307: RC4WD TUFF T21 1.9″ Internal Beadlock Wheels
• Z-W0321: Rock Tamer 1.9″ Beadlock Wheels
• Z-W0323: RC4WD Enforcer 1.9″ Beadlock Wheels (Red)
• Z-W0336: OEM JK Internal Beadlock 1.9″ Wheels
• Z-W0343: RC4WD Patriot Deepdish 1.9 Internal Beadlock Wheels
• Z-X0032: Tough Armor Front Winch Bumper for Chevy Blazer / TF2
• VVV-C0357: Roof Rack, Rollbar, Light Bar Combo for RC4WD Chevy Blazer Body (Black)

European Union Declarations of Conformity
RC4WD hereby declares, that the product Z-RTR0062 “RC4WD Trail Finder 2 “LWB” RTR W/ Chevrolet K10 Scottsdale Hard Body Set” complies with the Directive 2014/53/EU when used for its intended purpose. The full-length version of the DoC can be found here: https://rc4wd.com/go/docs/

737 N. Gateway St.
Visalia, CA 93291
www.RC4WD.com
support@rc4wd.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>