sygonix 2361019 LED Bead Light Chain, Battery-Operated User Manual

sygonix 2361019 LED Bead Light Chain, Battery-Operated

Operating Instructions

LED bead light chain, battery-operated

• Item no: 2361019 (Silver, 50 LEDs)
• Item no: 2361020 (Silver, 100 LEDs)
• Item no: 2361021 (Green, 50 LEDs)
• Item no: 2361022 (Green, 100 LEDs)

Intended use

Use the product to decorate interior and exterior spaces. Do not use the product for lighting purposes; the product is not suitable for illuminating working and living areas in your home.
The product is designed for private use only.
The product has an IP44 ingress protection rating. It is splash proof and suitable for outdoor use. Do not submerge in water.
The remote control is not protected against water. If you use it outdoors make sure it does not get wet. If you use the product for purposes other than those described, the product may be damaged. Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.

Delivery contents

• Product
• Remote control
• CR2025 button cell
• Operating instructions

Latest product information

Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Fol-low the instructions on the website.

Description of symbols

The symbol with the exclamation mark in the triangle is used to indicate important information in this document. Always read this information carefully.
Read the operating instructions carefully.

Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

General

• The product is not a toy. Keep it out of the reach of children and pets.

• Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
  If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.

• Maintenance, modifications and repairs must only be completed by a technician or an authorized repair center.

Handling

• Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.

Operation

• Consult an expert when in doubt about the operation, safety or connection of the product.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guar-anteed if the product:
  • Is visibly damaged,
  • Is no longer working properly,
  • Has been stored for extended periods in poor ambient conditions or
  • Has been subjected to any serious transport-related stresses.

Operating environment

• Do not place the product under any mechanical stress.
• Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.

(Rechargeable) Batteries

• Correct polarity must be observed while inserting (rechargeable) batteries.
• The (rechargeable) batteries should be removed from the device if it is not used for a long period of time to avoid damage through leaking. Leaking or damaged (rechargeable) batteries might cause acid burns when in contact with skin, therefore use suitable protective gloves to handle corrupted (re-chargeable) batteries.
• (Rechargeable) batteries must be kept out of reach of children. Do not leave (rechargeable) batteries lying around, as there is risk, that children or pets swallow them.
• All (rechargeable) batteries should be replaced at the same time. Mixing old and new (rechargeable) batteries in the device can lead to (rechargeable) battery leakage and device damage.
• (Rechargeable) batteries must not be dismantled, short-circuited or thrown into fire. Never recharge non-rechargeable batteries. There is a risk of explosion!

LED light

• Do not look directly into the LED light!
• Do not look into the beam directly or with optical instruments!

Connected devices

• Also observe the safety and operating instructions of any other devices which are connected to the product.

Light chain operation

• Do not electrically attach this light chain to another light chain. Chaining light chains can lead to fire.
• The lights become hot during operation and can start a fire. To prevent fire, observe this:
  • Do not cover the product
  • Keep the product away from highly combustible materials
• Always check the light chain for damage before use. For your own safety, do not use a damaged light chain.

Product overview

Setting up

Placing/installing the product

Before you use the product, place or install it in a suitable location.

Important:

• Do not set up the product under water.
• Do not hang any objects from the product.
• Make sure that the cables hang loosely to avoid tearing.
• Do not fasten the product directly to the installation surface (for example with pushpins).

1. Lay the product out entirely and arrange the cables so that they are not tangled.

2. Select a suitable location. If necessary, install suitable holders for the product (i.e. screw hooks, nails, etc.).
   CAUTION!  Do not place the product on easily flammable/combustible materials or products.

3. Lay the product on the holders or on the branches of a tree or bush. Use plastic cable ties to fasten the product if necessary.

Installing batteries

Note:
If an insulating strip protrudes from the battery compartment, batteries are installed already. Pull the strip out to establish the power supply.

Preconditions:
Prepare the required number of batteries of the correct type as stated in the section “Technical data”.

1. Unlock the battery compartment cover and remove it.
2. Insert the batteries into the battery compartment observing the polarity markings in the compartment.
3. Attach the compartment cover and lock it. If a seal is present, make sure it sits correctly and you do not damage it when attaching the cover.

Notes on remote control use

When using the remote control, observe the following:

• Point the remote control at the product control unit (example: battery box).
• Keep the distance between remote control and control unit as short as possible.
• Avoid obstructions between the remote control and the control unit.
• Replace the batteries of the remote control when the product no longer reacts to remote control input (also check the power supply of the product, if necessary).

Switching on/off

After setting up the product, switch it on to operate it.

Important:

• Never operate the product while it is in the packaging or rolled up.
• Do not cover the product while it is in use or cooling down.
• Remove the batteries when you do not use the product for longer periods of time to prevent leak-ing.
• Replace the batteries when you notice a great reduction in light performance or the lights no longer turn on.

Switching on/off via push button

Switch the product on and off via the button on the control unit.

1. Push the push button on the control unit to turn the lights on.
2. To turn the lights off, keep pressing the push button until the lights go off.

Switching on/off via remote control

Switch the product on and off via the remote control.

1. Press the button ON to turn the lights on.
2. Press the button OFF to turn the lights off.

Controlling the lights

Controlling brightness

Increase and reduce the brightness of the lights.

1. On the remote control, press the button (+) to increase or the button (-) to reduce the brightness.

Selecting light effects on the control unit

Use the control unit to select a light effect that suits your needs.

1. While the lights are on, keep pressing the push button on the control unit to reach and activate de- sired light effects.

Selecting light effects on the remote control

Use the remote control to select a light effect that suits your needs. Each light effect corresponds to a numbered button on the remote control.

1. Press one of the numbered buttons to activate a light effect.

Using the timer mode

In timer mode, the lights are on for the first 6 hours and then off for 18 hours. After that, the process re-starts.

1. To activate the timer mode, press the button TIMER on the remote control.
2. To deactivate the timer mode, switch the product off.

Cleaning

Important:

• Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage the housing and can cause the product to malfunction.
• Do not immerse the product in water.

1. Switch the product off.
2. Let the product cool down to ambient temperature.
3. Clean the product with a dry, fibre-free cloth.

Storing

1. Switch the product off.
2. Let the product cool down to ambient temperature.
3. Remove all batteries from the product and any supplied accessories to prevent leaking.
4. Store the product in a dust-free and cool environment.

Disposal

Product

This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not en-closed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive man-ner before it is handed over to a collection point.

Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste. Conrad provides the following return options free of charge (more details on our website):

• In our Conrad offices
• At the Conrad collection points
• At the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG

End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.

(Rechargeable) batteries

Remove batteries/rechargeable batteries, if any, and dispose of them separately from the product. Ac-cording to the Battery Directive, end users are legally obliged to return all spent batteries/rechargeable batteries; they must not be disposed of in the normal household waste.

Batteries/rechargeable batteries containing hazardous substances are labelled with this symbol to indicate that disposal in household waste is forbidden. The abbreviations for heavy metals in batteries are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable) batteries, e.g. below the trash icon on the left).

Used (rechargeable) batteries can be returned to collection points in your municipality, our stores or wherever (rechargeable) batteries are sold. You thus fulfil your statutory obligations and contribute to environmental protection.
Batteries/rechargeable batteries that are disposed of should be protected against short circuit and their exposed terminals should be covered completely with insulating tape before disposal. Even empty batteries/rechargeable batteries can contain residual energy that may cause them to swell, burst, catch fire or explode in the event of a short circuit.

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2361019-22_V4_0622_jh_mh_en 81064793445385867-2 I10/O4 en

References

• Conrad Electronic » All parts of success
• Download center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>