ZKTECO 7 Series Face Time Attendance Machine Installation Guide

August 4, 2024
ZKTECO

ZKTECO 7 Series Face Time Attendance Machine

ZKTECO 7 Series Face Time Attendance Machine

About the Device Installation

Please refer to the following recommendations for installation.

Installation Environment

  • INSTALL INDOORS ONLY

  • AVOID INSTALLATION NEAR GLASS WINDOWS

  • AVOID DIRECT SUNLIGHT AND EXPOSURE

  • AVOID USE ANY HEAT SOURCE NEAR THE DEVICE

Install on the wall

  1. Attach the mounting template sticker to the wall, and drill holes according to the mounting paper.
    Install on the wall 

  2. Fix the backplate on the wall with the wall mounting screws.
    Install on the wall 

  3. After passing the wires through the wiring hole and connecting them to the device, and then snap the device onto the backplate and push it down into place.
    Install on the wall 

  4. Fasten the device to the backplate with a security screw.
    Install on the wall 

Terminal Block

Terminal Block

Ethernet Connection

Establish the connection between the device and the software using an Ethernet cable. An illustrative example is provided below:
Ethernet Connection

Tap on to enter the main menu. And then click on [Comm.] > [Ethernet]

[IP Address] to input the IP address.
Note: In LAN, IP addresses of the server (PC) and the device must be in the same network segment when connecting to the software.

Power Connection

Power Connection

Exit Button, Door Sensor & Auxiliary Connection

Exit Button, Door Sensor & Auxiliary Connection

RS485 Connection

RS485 Connection

Lock Relay Connection

The system supports both Normally Opened Lock and Normally Closed Lock. The NO LOCK (normally opened at power on) is connected with ‘NO’ and ‘COM’ terminals, and the NC LOCK (normally closed at power on) is connected with ‘NC’ and ‘COM’ terminals. Take NC Lock as an example below:

  1. Device not sharing power with the lock
    Lock Relay Connection

  2. Device sharing power with the lock
    Lock Relay Connection

Wiegand Reader Connection

Wiegand Reader Connection

Note: The Wiegand interface is shared, and the user can choose to use either the Wiegand input or Wiegand output function to interface with different Wiegand devices.

Download Center

Scan the QR Code to download the User Manual, Installation Guide and Quick Start Guide.
QR Code

Documents / Resources

| ZKTECO 7 Series Face Time Attendance Machine [pdf] Installation Guide
7 Series Face Time Attendance Machine, 7 Series, Face Time Attendance Machine, Attendance Machine, Machine
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals