denver CCT-1610 Car Dashcam Instruction Manual
- June 9, 2024
- Denver
Table of Contents
denver CCT-1610 Car Dashcam
Before operating this product, please read this instruction manual carefully and completely. The device has a built-in battery that ensures the correct saving of recordings. It is not designed to be powered by the battery alone due to its small capacity.
Safety information
Please read the safety instructions carefully before using the product for the first time and keep the instructions for future reference.
- Warning: This product includes a lithium polymer battery.
- Keep products out of the reach of children and pets to avoid chewing and swallowing.
- The product must be operated at temperatures from O degrees Celsius to 45 degrees Celsius and stored at temperatures from O degrees Celsius to 45 degrees Celsius. Any operation or storage beyond these temperature ranges can affect the function.
- Never open the product. Touching live parts inside the device can cause electric shock. Repairs or servicing must only be carried out by qualified personnel.
- Do not expose to heat, water, moisture, or direct sunlight!
- The unit is not waterproof.
- Penetration of liquids or foreign objects inside the unit can result in fire or electric shock. If this is the case, discontinue use immediately.
- Only use the device with a supplied 12 V car adapter.
- Do not use nonoriginal accessories together with the product as this can make the product functionality abnormal.
Product Overview
- microSD card slot
- MIC
- Mode
- UP
- Reset
- OK
- MENU
- Power
- USB port
- DOWN
- Lock
Charging
Connect the camera to the car charger via the USB port.
Turning the camera on/off
If the camera is connected to the car charger, it will automatically turn on
when the engine is started. If it is not connected to the car charger, please
proceed as follows:
- Long press the Power button: the camera will turn on.
- Long press the Power button again: the camera will turn off.
Recording video
If the camera is connected to the car charger, video recording will start
automatically and stop when you kill the engine. If the camera is not
connected to the car charger, turn on the camera and press the Power button to
start the video recording. Then press the OK button again to stop the video
recording.
Taking photos
With the camera turned on, short press the Mode button (M) to switch to photo
mode. Then short press the OK button to take a photo.
Playback
With the camera turned on, short press the Mode button (M) to switch to
playback mode and select a file using the up/down button. Press the OK button
to play the selected file.
Video setup
In video mode, short-press the Menu button (M) to adjust the video settings
and then short-press the OK button to start the video recording. Press OK
again to stop the video recording.
Photo setup
After turning on the camera, press the Mode button to switch to photo mode and
then short-press the Menu button (M) to adjust the photo settings.
Specifications
Troubleshooting
If problems occur during normal operation, please try these methods below:
- I cannot take a photo or record a video.
- Check whether the SD card has enough free space or is locked.
- “File error” occurs when a photo or video is replayed.
- The file is not complete due to the SD card storage error. Please format your SD card.
- I see a black image when recording a sky or water scene.
- High-contrast scenes influence the camera’s automatic exposure function; you can adjust the “EV” in setting mode.
- The color is not perfect on a cloudy day and under ambient light. Set the “white balance” function to automatic.
- A cross stripe appears in the image.
- The “light frequency” has been set incorrectly. Please set it to 50 Hz or 60 Hz according to the local power supply frequency.
- The device crashes.
- Restart the camera using the “RESET” button.
Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual. ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S
Electric and electronic equipment and including batteries contain materials, components, and substances that can be hazardous to your health and the environment if the waste material ( discarded electric and electronic equipment and batteries) is not handled correctly. Electric and electronic equipment and batteries is marked with the crossed-out trash can symbol, seen above. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately.
As the end user, it is important that you submit your used batteries to the appropriate and designated facility. In this manner, you make sure that the batteries are recycled in accordance with the legislature and will not harm the environment. All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites or be collected from households. Additional information is available at the technical department of your city.
Hereby, Denver A/S declares that the radio equipment type CCT-1610 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available on the following internet then click the search ICON on the top line of the website. Write model number: CCT-1610. Now enter the product page, and the RED directive is found Max Output Power: 1 W
- DENVERA/S
- Omega SA, Soften
- DK-8382 Hinnerup
- Denmark www.facebook.com/denver.eu
- Warning: Lithium battery inside
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>