A-20 Bluetooth Speakers User Guide
- June 4, 2024
- Speakers
Table of Contents
A-20 Bluetooth Speakers
Use details
- Tum the black button to the left, turn on the machine.tum the black button to the light, turn off the mach
- Saving mode
- Click per bus/ long press to decrease volume
- Press next/ long press to decrease volume
- Pause/ play
- USB charging port
- Micro interface
- Tf card socket (caoacitys32g)
- Wen charging. the red light is aways on, and the charging room can be closed within 2-3hours
- Power on-Mobile Search Bluetooth -BT-Speaker-click the link (the sound will tinkle once the connection is successful)
Pair a Bluetooth speaker with a Bluetooth phone
-
Make sure the bluetooth speaker is turned on
-
Start the bluetooth function of the mobile phone, find the bluetooth settings, and then select the bluetooth speaker. The device name of our company’s product is BT SPEAKER. Just click “Pair”. After successful patching, you will hear the “Voice” prompt tone.
Use a Bluetooth speaker -
Turn on the POWER switch to ON at the bottom of the speaker: the Bluetooth function is turned on by default.
-
“” health: short press mode conversion (Bluetooth-Card-FM-LINE IN). The default ” Bluetooth mode” when powered on is automatically converted to “TF card mode” when the TF card is inserted, and automatically converted to “LINE IN” mode when the audio input line is connected.
-
Volume up and down keys: When the music is in state, long press “” to decrease the volume, and short press the previous song. “”Long press for volume up, short press for a song. (Press the two keys at the same time for 3 seconds to switch between Chinese and English). In FM state, press “””” to increase or decrease the frequency band.
-
” ” key: short press to play and pause when playing music, and quick double press to call back the last call. When prompted to have a call, answer the call and hang up.
-
MIC: speak directly to the phone when the phone comes, used for conversation.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment