Speakers HM11 Wireless Portable Mini Speaker Instruction Manual

HM11 Wireless Portable Mini Speaker
Instruction Manual

HM11 Bluetooth speaker

Thanks for choosing our product. We hope you will enjoy the music.

Security guidance

Before using the speaker, please read our specs dearly and keep it for future reference

1. Stay away from heat, sharp items, and direct sunlight.
2. Stay away from an open fire.
3. Do not insert any metal objects, avoid short circuits.
4. Don’t repair the product by yourself, please contact the authorized manufacturer to repair it.
5. Avoid rain, spray, and other liquids.
6. If the product is overheated, damaged or falling into the liquid, stop using it.
7. Use the product according to local standards and regulations.

Built – in battery care

1. Product built-in rechargeable battery. the new battery only needs 2-3 hours for the first time to complete the charge and discharge cycles. Do not make the battery fully charged, because overcharging will shorten the life of the cycle of the
2. If you do not use it, power might be lost a little.
3. Products placed in the hat or in cold places will shorten the life of the

Charger care:

1. Please use the standard 5V DC adapter to charge. Use of any other type may damage the product.
2. Charging according to instructions.
3. IMPORTANT: Please refer to the description of the user’s manual of the charge status indicator, Some speakers can not be used when charging.

**Accessories:

**

• *1 HM11** Bluetooth speaker
• 1*USB charging cable
• 1saudio cable
• 1manual

Integrated battery charging:

This Bluetooth speaker is equipped with an integrated rechargeable lithium battery

1. Insert the charging cable DC 5V, and connect the USB to the computer or AC / DC adapter. An LED Indicator light turns red means the speaker is in charge.
2. When the speaker is fully charged, the red indicator will turn off. Pair of HM11 Bluetooth speakers for mobile phones or other devices Active Bluetooth speaker pairing mode. The speaker in the shutdown mode, long-press the key for 3 seconds, the speaker begins to make a pairing. Boot into the paired connection — open the speaker, if the speaker was not previously connected with the phone or other Bluetooth devices, it automatically enters to wait for pairing; if the speaker and other Bluetooth devices were connected before when starting up, it will automatically connect the last connected device.

Tips:

Make sure the Bluetooth speaker is In the boot mode and start activating the pairing.

1. Turn on your phone and activate the Bluetooth function.
2. Search for Bluetooth devices, and F18 will appear.
3. Connect HM11.1f you need to pass the password, you can enter “0000s, then HM11 will connect to your phone to start using.

Bluetooth function usage:

1. Volume adjust
2. Volume dial
3. Next
4. Play/Pause Mode
5. Previous
6. Bluetooth indicates light
7. The passive unit
8. AUX Audio port
9. US8 flash disk
10. Charging port
11. TF card read

• Tum on/off (Mc 4), long press 4 seconds. Bluetooth indicates light(Pic 6) flicker and into Bluetooth match mode, turn off the long press 4 seconds to Play/Pause: short press will alternate play and pause. The double press will change mode When receiving the call, a short press to answer the call, a double press will refuse the call Double press will call the latest calling person when the speaker on the normal model
• Previous music(Pic 5) short press
• Next music(Pic 3) short press
• Volume adjust(Pic 1) rotate can adjust the volume

AUX external audio:
AUX audio port (Pic 8) Inset audio wire after turning on the speaker, will into AUX mode automatic USB read(Pic 9): an insert USB to listen to music

and has not
entered the pairing mode| Close other matching equipment,
Re-search “HM11” for pairing
Bluetooth| V4.1 + EDR
---|---
Range| 10 meters
Frequency| 50HZ-22kHZ
Power supply| DC 5V/600-800mA
Battery| 3.7V / 400mA lithium
Charging time| Approx 2-3 hours
Trumpet| 40MM 40 3W
Operating time| Approx 2-3hours
Unit weight|

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>