Speakers XS-F11 Bluetooth Speaker and Wireless Charger or LED Lamp User Manual

Speakers XS-F11 Bluetooth Speaker and Wireless Charger or LED Lamp User Manual

First of all, thank you for choosing this product, XS-F11.With excellent quality, as well as avant-garde and unique appearance, it can make you feel convenient and comfortable in your daily life, work and study. With XS-F11 LED lamp, you can fully enjoy high-tech and fashionable life experience. Please read this instruction carefully before using this product.
Note

1. This lamp can only use 12V/2A, DC power supply, please ensure that the use voltage does not exceed the requirements of the lamp.
2. Don’t alter the product by yourself; otherwise it may damage the product.

Notes

• This lamp is only for indoor use.

• Do not use it in excessive humidity.

• Do not clean the appearance with acid or alkaline detergent.

• If it is not use for a long time, please unplug the power adapter.

• Please do not disassemble the lamp and repair it by yourself.

• Please do not place the lamp in the direct sunlight or near the heat source.

• Do not put it close to inflammable items.

• Do not place the lamp` inthe uneven place or on slopes larger than the horizontal plane by 6°.

• Please do not place it in a soft, flammable place.

• Do not insert metal or inflammable materials into the gap of the lamp.

• Pull out the plug immediately when anything abnormal (smoke, odor) occurs in use.

• Do not touch the plug with wet hands.

• Output wires cannot be tied up or bundled together in the use process, and they must be stretched out naturally.

• Please do not use multi-functional adapter socket.

• Do not use the lamp when the power cord cover is damaged. Please contact the nearest distributor to replace it.

Part List

• Bluetooth Speaker/Wireless Charging/LED Lamp-1
• Instructions-1
• Power Adapter-1

Functional characteristics

• It supports 10W/7.5W/5W wireless charging.
• Dual-channel Bluetooth speaker function.
• 3-grade brightness touch dimmer.
• LED beads are of eye protection function, flicker-free, long service life and maintenance-free.

Product Structure Diagram

Instructions

1. Wireless charging function:
   Put the digital product that supports wireless charging function in the wireless charging gasket, and light the charging indicator, compatible with 10W/ 7.5w /5W specifications.

2. Turn on/adjust brightness/turn off the light:
   After you touch the metal touch ring with your finger, it will turn on the light/brightness mid-grade brightness / high-grade brightness /turn off the light and cycle accordingly.

3. Bluetooth Speaker:
   Turn on Bluetooth of mobile phone, connect the name of Bluetooth device of “XS-F11 “, and there will be prompt sound if it is connected successfully. ” ” : Hold it to turn on/off the machine; and there will be corresponding prompt sound at the same time.
   “ “Hold it to play the next song; Click it to enter the volume+ —/ 44 “ “Hold it to play the previous song; Click it to enter volume- till no voice. “ “: Music play/pause key.

Note:
Power supply should be connected to each function of the production.

Specifications

<6mm
Output frequency of W.C.| 10W:DC9V/1.1A 7.5W:DC7.5V/1A 5W:DC5V/1A

FAQ

the DC plug is properly connected to the DC socket
The phone’s temperature is high during wireless charging| Mobile phone and wireless charging stand are offset| Adjust the position of the mobile phone and the wireless charging stand to the center
Interrupted during wireless charging| Over-temperature protection| Take the phone away, recharge it after 2-3 minutes or larve it alone with out any action, the phone will automatically recharge after the temperature drops.

uding the above reasons, the desk lamp still does not light up or flickers. Please do not open the shell to repair it by yourself. Professional maintenance personnel are required to repair it.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radiorry technician for help. FCC RF exposure statement: The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>