Speakers E7-L Bluetooth Speaker User Manual
- June 9, 2024
- Speakers
Table of Contents
Speakers E7-L Bluetooth Speaker User Manual
Warnings
- To ensure proper use and trouble-free operation, please carefully read this user manual first.
- For the first use, a full charge is recommended.
- Please use and store the product at room temperature.
- Do not throw and drop the product to avoid damages.
- Do not expose the product to fire, high temperature, direct sunlight, etc.
- Do not use organic solvents or other chemicals to clean the product.
- Do not allow small particles to get into the product.
- Please keep volumes of the speaker moderate to avoid temporary or permanent hearing impairment.
- Do not dissemble the product, or make any modifications to the structure or any parts of it.
- Keep the product out of children’s reach.
- If the battery is not properly replaced, there will be an explosion accident, which can only be replaced with the same type of battery.
- Batteries (battery packs) can not be exposed to such conditions as sunshine, fire or similar overheating conditions.
Packing Details
Buttons’ function
Bluetooth disconnect
Press and “+” at the same time can disconnect current device, and E7 goes to discoverable status; If press “” power key”” can reconnect last Bluetooth device
Ports’function indicator
Data transmission
Insert Micro SD card when power off, Use data cable connect to PC, press the power button of enter SD Card mode, then can copy music files on Micro SD card.
Bluetooth connecting
-
Power on
Press and hold “power key” 2s, with voice prompt “ding dong” and “ding” Bluetooth LED flickering, waiting to connect. -
Bluetooth connect
Go to device’s Bluetooth page, find and connect the pairing name: E7-L With a voice” dong dong ding” and the Blue LED stays.
Can connect E7-L automatically once open the device’s Blutooth function in next use
Other tips
If need connect to other Bluetooth device, press and hold ” ” at the same time
disconnect current device, E7-L returns to waiting for connection.
True wireless stereo function
Main Speaker
Slave Speaker
-
TWS connection
Power on both E7-L, and both under disconnect status, choose one of them and press “+” at the same time after hearing the prompt tone the speaker enters the TWS series connection mode, and the prompt tone is heard again, then the two speakers are successfully connected. -
Let TWS speakers connect to Bluetooth device
Go to the device’s Blutooth page, and find E7-L to connect, you will hear a prompt tone when the connection is successful, At the same time, the LED indicator blue light is always on. -
TWS disconnect
Take each of them, double press “+-“at the same time, can disconnect TWS.
Tips:
01. Let 2pcs E7-L connect, for the 1st one you double press “+”, this one is
the main speaker (left channel), and the other one is the follow speaker(right
channel).
02. Only support 2pcs speakers under TWS connection.
03. Will keep previous main/follow relationship when reconnect TWS for next
time use.
04. Once TWS connected, follow speaker’s LED keeps stay, and main speaker’s
LED indicate the status of play, pause, Bluetooth connection etc.
05. Under TWS, operate each of them, the other one has synchronous operation.
Technical Specification
Product Size： 118×90×90mm
Product weight： 449g（Including built-in Lithium battery）
FAQ
0755-61181399
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>