ET2 Contemporary Lighting E24924 Palla 1 Light LED Pendant Instruction Manual
- June 9, 2024
- ET2 Contemporary Lighting
Table of Contents
ET2 Contemporary Lighting E24924 Palla 1 Light LED Pendant
ITEM NUMBER: Palla 1-Light LED Pendant
DESCRIPTION: E24924
Before Getting Started
Read the instructions carefully prior to assembling the product. When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside. Carefully remove all packaging materials and retain for future use. Keep al hardware parts and packaging out of reach of small children. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product. Ensure that you have all required contents for complete assembly. Take care when lifting. Assemble the product in close proximity to where you intend to position the item. Do not over tighten the screws and bolts as this may damage the threads. Do not let children play with this product. Risk of suffocation! Keep any packaging materials away from children.
GENERAL Lighting Instructions
Carefully read through the instruction sheet before assembly and using the product. Caution there is a risk of shock. Disconnect from power source before assembling or cleaning. Switch off, unplug and allow bulb to cool before replacing bulb or cleaning. Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire. Do not plug the product in if cord is torn or frayed.
Cleaning& Maintenance
On polished finishes, often using tac powder reduces the appearance of
fingerprints and other smudges. For respective shade surfaces, use the
appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
Periodically (every 90 days) make sure that the screws are fully tightened.
Prolonged exposure to heat sources may cause glazing, melting and scorching,
or even cause color to fade.
PLEASE CONSULT AN ELECTRICIAN BEFORE INSTALLATION
LAMPING: LED Intergrated 8W
Vinput: 120V