Harbor Breeze SLL48BK 48-ft 18-Light Plug-in White Outdoor LED Edison String Lights Instruction Manual
- June 9, 2024
- Harbor Breeze
Table of Contents
HARBOR BREEZE and logo design are trademarks or
registered trademarks of LF, LLC. All rights reserved.
ITEM #0876265
STRING LIGHTS
MODEL #SLL48BK
PACKAGE CONTENTS
SAFETY INFORMATION
READ AND SAVE THESE INSTRUCTIONS.
WARNING
- Never use this product with an extension cord unless the plug can be fully inserted. DO NOT alter the plug.
- To reduce the risk of electric shock, DO NOT use the product if power cord is frayed or broken
- Always unplug this product before replacing bulbs.
CAUTION
- Risk of Fire/Risque d’incendie/Riesgo de incendio: DO NOT use bulbs having a wattage greater than the maximum value stated on the product
- The lighting string is rated 11 watts; do not overload. Connect end-to-end a maximum of 960 watts light strings or decorative lighting of the same type. Connect up to 88 sets with included 0.6 watts bulbs
- Do not mix LED and incandescent bulbs.
PREPARATION
Before beginning installation of product, make sure all parts are present. If
any part is missing or damaged, do not attempt to install the product.
Estimated Installation Time: 10 minutes. No Tools Required for Installation
INSTALLATION INSTRUCTIONS
-
Install bulbs (B)
WARNING: When replacing bulb, please allow bulb to cool down before touching. -
Hang the lights (A) in the desired location.
WARNING: Do not secure the cord with staples or nails.
If changing location, remove bulbs before installation.
CAUTION: Bulb may crack or break. -
Plug power cord of lights (A) into wall outlet.
DANGER: If using this light in a WET or DAMP location, connect this product to a Ground Fault Circuit
Interrupting (GFCI) outlet to reduce the risk of personal injury, electrical shock or death. If one is not provided, contact a qualified electrician for proper installation.
CARE AND MAINTENANCE
- Clean only with a dry, soft cloth. Do NOT use abrasive cleaners
- Bulb Replacement: Use only standard-base 0.6-watt max. LED bulbs or incandescent bulbs equivalent
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Light does not come on initially or no longer comes on. | 1. Bulb is burned |
out
2. Power is OFF./NO
3. Lamp is not plugged in| 1. Replace bulb
2. Make sure power supply is ON.
3. Plug lamp into outlet.
WARRANTY
The distributor warrants all of its lighting fixtures against defects in materials and workmanship for one (5) years from the date of purchase. If within this period the product is found to be defective, take a copy of the bill of sale as a proof of purchase and the product in its original carton to the place of purchase. The distributor will, at its option, repair, replace or refund the purchase price to the consumer. All costs of installation and removal of the fixture is the responsibility of the consumer. This warranty does not cover fixtures becoming defective due to misuse, accidental damage or improper handling and/or installation and specifically excludes liability for direct, incidental or consequential damages. As some states do not allow exclusions of limitations on an implied warranty, the above exclusion and limitation may not apply. This warranty gives you specific rights and you may also have other rights which may vary from state to state.
Questions?
Call customer service at
1-888-251-1003, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
[email protected].
ATTACH YOUR RECEIPT HERE
Purchase Date
Printed in China
JMLI1909