Ibiza MERCURE50 LED Party Speaker 500W Bluetooth Instruction Manual
- June 9, 2024
- ibiza
Table of Contents
BLUETOOTH PARTY SPEAKER WITH USB & TF
AVEC USB & MICRO-SD
2 x 8″/20cm – 500W Ref.
MERCURE50
INSTRUCTION MANUAL
TOP PANEL
PLEASE READ THE MANUAL CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.
CHARGING THE BATTERY
Plug the small connector of the adaptor into the charging port (5) on the top
of the speaker and the other end into a wall outlet.
The display (14) shows the battery level that increases during charge until it
is full. When the battery voltage runs low, a tone will be heard, indicating
that the battery needs to be charged.
IMPORTANT NOTE ON LITHIUM-ION BATTERIES
- PRIOR TO USING THE UNIT FOR THE FIRST TIME, PLEASE CHARGE FULLY THE BATTERY
- CHARGE THE BATTERY REGULARLY AFTER EACH USE. DON’T WAIT UNTIL IT IS DISCHARGED!
- DON’T allow the battery to discharge completely, otherwise it will lose 20% of its capacity or even be totally damaged! If the voltage becomes too low, the internal circuits are not powered anymore and it will become impossible to recharge the battery!
- If you don’t use the unit for a longer period of time, it is recommended to charge it at 40% of its capacity and check/charge it once per month.
BATTERIES ARE NOT COVERED BY THE WARRANTY
WE CANNOT BE HELD RESPONSIBLE FOR DAMAGED BATTERIES FURTHER TO THE NON- OBSERVANCE OF THESE BASIC RULES.
CONTROLS
- MIC input
- AUX input
- TF input
- USB input
- DC 9V input
- MENU
- REC
- MODE/MIC PRI
- On/Off
- Previous Track / CH11. Play/Pause/TWS
- Next Track / CH+
- LED Switch
- Display
- Volume control
USB OPERATION
Insert a USB device into USB port (4) to play music stored on the drive. The
play will start automatically.
MICRO-SD OPERATION
Insert a micro-SD card into TF port (3) to play music stored on the drive. The
play will start automatically.
BLUETOOTH OPERATION
- POWER button: Long press the POWER button (9) to turn the speaker on. The display (14) will slowly flash “bLUE” to indicate that the speaker is on. Keep the POWER button (9) pressed to turn the unit off. The display (14) will always show “bLUE” when connected.
- Turn on the Bluetooth function on your external Bluetooth device and search for “MERCURE” . Enter the password “0000” if required. After a successful pairing, you will hear a sound.
USE WITH A WIRED DEVICE
To use the speaker as a wired device, plug one connector of the 3.5mm audio
cable into the 3.5mm auxiliary audio input jack (2) on the speaker. Plug the
other connector into the headphone jack of your media-playing device. Press
the button MODE (8) to switch to LINE mode. The display (14) will show “LINE”,
while connected. Playback is controlled via the wired device.
MENU BUTTON(6)
Press the button MENU (6) and rotate the volume knob (15) to control the
functions below:
1x press→ T: Treble
2x press→ b: Bass
3x press→ n: Mic vol
4x press→ E: Echo
5x press→ d: Remix vol
6x press→ U: Music vol
REC
Microphone recording in USB and microSD mode.
MODE / MIC PRI
Short press on this button (8) to toggle between following modes: BT, AUX,
USB, TF. In BT, USB and microSD mode, keep the button pressed to enter into
MIC Priority. The display will show “n-OF”. MIC PRI means the music will stop
when you speak into the connected microphone (not included), and will resume
play automatically when you stop speaking into the microphone.
PREVIOUS TRACK / CHShort
press on button (10) to move backwards through the playlist in BT, USB and TF
MODE. Keep the button pressed to rewind music in USB and TF mode.
PLAY/PAUSE / TWS
Short press on this button to play/pause (11) the music in BT, AUX, USB and TF
mode. Keep the button pressed on both units to activate the TWS mode. When
both units have been paired successfully in TWS mode, you can connect just one
unit to MERCURE50. The display on one speaker will flash slowly “Blue” and the
display of the other speaker will keep showing “BT01”. Now you can control
both units via your BT device. Keep the TWS button pressed on one of the
speakers to disconnect the TWS function on both speakers.
NEXT TRACK / CH+
Short press on button (12) to move forwards through the playlist in BT, USB
and TF MODE. Keep the button pressed to fast forward music in USB and TF mode.
LED SWITCH
Short press to browse through the light modes. Keep the button pressed to turn
off the light.
VOLUME ADJUSTMENT
Turn the VOLUME knob (15) to control the music volume.
SPECIFICATIONS
Power supply ……………………………………………… 9V 1.5A via supplied mains adaptor
Battery …………………………………………………… Lithium-ion 7.4V 3600mA h
Consumption ………………………………………………….. 40W
BT frequency band ………………………………………….. 2402-2480MHz
Max. RF emission power ………………………………………………0.39dBm
Output power ……………………………………………………. 500W
Woofers ……………………………………………………………….2 x 8″/20cm
Dimensions ………………………………………………. 275 x 295 x 578mm
Weight ………………………………………………………. 6.25kg
Correct disposal of the product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmental safe recycling.
EU Declaration of Conformity
Hereby we| LOTRONIC SA
Avenue Zénobe Gramme, 9
1480 SAINTES
Belgique
+32.2.390.91.91
---|---
Certify and declare under our sole responsibility that the following product:
| Trade name: | IBIZA |
|---|---|
| Product name: | Portable speaker |
| Type or model: | MERCURE50 |
Conforms to the essential requirements of the RED directive 2014/53/EU, ErP directive 2009/125/EC, Commission Regulation (EC) No 2019/1782, 2011/65/EU RoHS directive, the Commission Delegated Directive (EU) 2015/863 and the battery directive 2006/66/EC, based on the following specifications applied:
EN 62368-1 : 2014 + A11 : 2017
EN 50663 : 2017
EN 62479 : 2010
ETSI EN 301 489-1 V2.2.3 : 2019-11
ETSI EN 301 489-17 V3.2.4 : 2020-09
EN 55032 : 2015 + A11 : 2020
EN 55035 : 2017 + A11 : 2020
EN 61000-3-2 : 2019
EN 61000-3-3 : 2013 + A1 : 2019| ETSI EN 300 328 V2.2.2 : 2019-07
EN 50563 : 2011 + A11 : 2013
IEC 62133-2 : 2017
IEC 62321-3-1 : 2013
IEC 62321-4 : 2013 + AMD1 : 2017
IEC 62321-5 : 2013
IEC 62321-6 : 2015
IEC 62321-7-1 : 2015
IEC 62321-7-2 : 2017
IEC 62321-8 : 2017
---|---
Place and date of issue: Saintes ( Belgium ), on 06/05/2022 Manuel De Sousa Quality Manager
https://www.lotronic.net/MERCURE50 https://www.facebook.com/IbizaLightSound/
Imported from China by LOTRONIC S.A. Avenue Zénobe Gramme 9 B-1480 Saintes
www.ibiza-light.com
©Copyright LOTRONIC 2022
Documents / Resources
|
Ibiza MERCURE50 LED Party Speaker 500W
Bluetooth
[pdf] Instruction Manual
MERCURE50 LED Party Speaker 500W Bluetooth, MERCURE50, LED Party Speaker 500W
Bluetooth, Speaker 500W Bluetooth, 500W Bluetooth
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>