LUCiDE EXTRAVAGANZA GUST Table Lamp Installation Guide
- June 3, 2024
- LUCIDE
Table of Contents
LUCiDE EXTRAVAGANZA GUST Table Lamp
Thank you for purchasing a Lucide original!
This manual will hopefully guide you easily through the installation process.
We aim to inspire and illuminate our clients by offering trendy, high-quality
and affordable lighting.
Welcome to the community of #illuminatesyourworld
Item number: 10503/81/30
EAN code: 5411212105349
RECOMMENDED LUCIDE
LIGHT SOURCE
49022/04/60
Dimmable: Yes
Included: No
General
- Dimensions LxWxH: 22cm x 22cm x 46cm
- Main material: Synthetic Material
- Color: Black and Gold
- Style: Retro
- Shape: Other
- Weight: 1,68kg
Specifications
- Dimmable: No
- Light direction: Around (Diffuse)
- Adjustable in height: Not In Height Adjustable
- Directional: Not Directional
- Cable: Yes, Cable With Plug On Product
- Cable length: 150cm
- Sensor: Without Sensor
- Control: On/Off Switch – In The Cord
- Power supply: Adapter/Power Grid
- IP-Class: 20
- Electric Class: 2
- Number of light sources: 1
- Lamp socket: E14
- Maximum wattage: 40W
- Power requirements: 220-240V~50Hz
- Warranty: 2 Years
TECHNICAL DRAWING & DIMENSIONS
INSTALLATION DRAWING SPECIFICATIONS
Safety Instructions
Please read this notice carefully and keep it during the lifetime of this
product. Follow the instructions for a safe and correct installation
and functioning of the light fixture. The manufacturer does not accept any
responsibility for damage caused by improper
installation and service. Installation should always be done by a qualified
electrician.
Always isolate the power before commencing installation, maintenance or
repair.
In case of doubts, please contact a qualified electrician.
Please pay attention to locations where the item can be installed (indoor,
outdoor, bathroom (for outdoor and bathroom installation,
please see further). Indoor items cannot be used in humid places. Do not put
the item in contact with water or any liquids or
inflammable products. Always respect the minimal distance (indicated on the
light) to inflammable products.
During installation, make sure that the cables will not be squeezed or damaged
by sharp edges. If the external flexible cable is
damaged, it needs to be replaced exclusively by the manufacturer, his service
agent, or a qualified electrician.
This is to avoid all risks.
Because the temperature of the item and the bulbs can get very high, they must
cool down before being touched. Always use the correct bulb (respect type and
maximal wattage as indicated on the product).
Explanation of the symbols which can appear on the fixture
This item is only suitable for indoor use, exclusive bathroom (except if a higher IP degree permits that the item can be used in the bathroom).
Legislation requires that all electrical and electronic equipment must be
collected for reuse and recycling.
Electrical and electronic equipment marked with this symbol indicating
separate collection of such equipment must be returned to a municipal waste
collection point.
Class I: The item has an earth connection. The earth wire (green-yellow) needs to be connected to the earth connection (marked with this symbol).
Class II: The item is double insulated and must not be connected to the earth wire.
Class III: The item is only suitable for lower voltage supply and must not be connected to the earth wire.
IP 20: Protection against contact with a finger
If the protection glass is damaged or broken, it needs to be replaced immediately.
Please respect the minimum distance from the bulb to inflammable objects.
Further explanations can be found on our website.
www.lucide.com
LUCIDE NV
LUCIDE NV BISSCHOPPENHOFLAAN 145, 2100 DEURNE, BELGIUM
[email protected] tel: +32(0)3 366 22 04
www.lucide.com