aigo GT8 Men Smart Watch Instruction Manual
- June 9, 2024
- aigo
Table of Contents
- Preparation before use
- Install APP- Get ready for Bluetooth pairing
- Function description of watch keys
- Associated Devices
- Connect the audio blue
- Connect the traffic card NFC
- Watch Function Introduction
- status bar
- Bluetooth call
- Time table switch
- Step counting
- Heart rate, blood oxygen and blood pressure interface
- Exercise ( more exercise)
- information display
- Sleep mode
- Voice Assistant
- Calculator
- weather
- Stopwatch function
- Screen brightness adjustment
- Screen out time adjustment
- Respiratory training
- Music control
- About this computer
- Function introduction of APP end
- Product parameters
- NOTE
- Description of restricted substances
- FCC Caution
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
aigo GT8 Men Smart Watch
Preparation before use
It is required to ensure that the electricity of the meter is fully charged before using the battery
Put the wireless charger at the bottom of the watch and automatically absorb
the magnetic magnet to start charging. The charging instruction will be
displayed on the screen of the watch.
Wearing type
- It is best to wear the meter after the styloid process;
- According to the adjusting hole, adjust the suitable flange; Buckle the wrist strap;
- The sensor should be close to the skin to avoid moving.
Install APP- Get ready for Bluetooth pairing
Download the “Wear fitPro” APP to the PC and install it. You can directly search for “Wear fitPro” in the APP store and download it. You can also scan the following dimension code to jump to the connection and download (browser, WeChat, etc. can scan the code)
|
---|---
Download Wear tPro
by scanning the dimension
code
Function description of watch keys
Crown/function key
- Time screen Rotate the crown to slide the screen left and right.
- On the Time screen, click the Redirect menu.
- Other functions: Rotate the crown to slide up and down.
- Other Functions Click the crown to return to the previous screen.
- Function Menu interface Click the crown twice to change the menu style.
- Time interface Click the function key to jump to Alipay interface.
Associated Devices
For the first time, connect the APP for calibration. After successful connection, the meter will automatically synchronize the time.
- APP search connection: After the mobile phone is turned on, enter the APP to directly search the device for mobile connection. (The meter shall be started normally)
- Code scanning connection: After the meter is turned on, enter the menu interface, slide down to enter the setting button, click the “Connect” button, find the “Connect” button and click it, then slide left to connect the “Scan” code, and directly enter the “Scan” code connection in WearfitPro.
-
Follow the above steps to find the connection button
-
Use the APP to scan the code for connection on the mobile phone
Connect the audio blue
Enable the blue button function
After the pairing is successful, you need to turn on the call function at the
meter end (this switch is only available with the dialing function) and find
it in the blue screen of the phone system. For example, the GT8audios device
is connected and connected. After the connection is successful, you can answer
the call and listen to music (Note: this function is synchronized with the APP
binding to enable the blue screen). The APP will automatically save the blue
screen address. When the APP is opened or running in the background, it will
search and connect the blue screen;
-
Click the blue play icon at the meter end
-
Connect the mobile phone to Bluetooth
Connect the traffic card NFC
Open Alipay [transportation card] on mobile phone
- Open the Alipay APP and dick the ”Travel” button on the home page.
- Click the “Go to Collect” button in the bus menu.
- Enter the card interface and click “Agree to the Agreement and accept the Card”.
- Click “Use Now” to successfully open the Alipay transportation card.
The watch is bound to mobile Alipay
- On the watch, find the “Alipay” button in the function menu and dick to enter (the phone needs to be connected to the watch)
- Operate according to the instructions of the watch.
- Until the two dimensional code is displayed, open the mobile phone Alipay [scan] can bind successfully .
How to use Alipay traffic card for watch
- Click [Boarding Code] on watch Alipay interface
- Click the corresponding city card to display the corresponding passenger code.
- Align the bus code of the watch with the card reader.
- You can pay by bus.
How to unbind Alipay [boarding code]
Unbinding of watch end Click [Set] on the watch Alipay interface and then
click unbind.
Unbinding mobile phone
- In the Alipay APP search box, search [Smart Device] and click to enter.
- Select the target device to unbind.
- Release the binding of the watch and Alipay APP according to the prompt.
Watch Function Introduction
status bar
- The time table interface slides up to enter the status bar interface.
- The following shortcut buttons can be swipe left and right to view more shortcut buttons.
Bluetooth call
In the audio Bluetooth connection status, enter the dial interface of the main menu to enter the number for direct dialing. If it is not connected, you cannot dial.
matters needing attention
In the audio Bluetooth connection status, you can call out by entering the
address book/recent calls. If not connected, you cannot call out, and the
prompt is not connected. (Note: To use the phone book, you need to synchronize
the contact information in the APP address book.)
Time table switch
- In the time interface, long press for 3 seconds to call up the dial switch interface, slide to the desired dial and click.
- Slide left to the bottom to click Add Timetable.
Step counting
Wear a watch and record the steps, distance and calories of daily exercise to view the current real-time steps.
Heart rate, blood oxygen and blood pressure interface
The corresponding health measurement interface is found in the function menu. Please wear your watch when measuring to prevent data errors. After skin detection, wait 60 seconds for the current result. This function requires the watch to support the sensor.
Exercise ( more exercise)
Find the sports interface from the function menu, and select the corresponding sports mode. In this interface, you can record the calories consumed and the duration, mileage, and heart rate; 10 kinds of sports modes display: time, mileage, calories, heart rate.
information display
When the watch pushes multiple reminder messages in the connected state, the main interface slides down to this interface to view the history message record.
Sleep mode
When falling asleep, the watch will automatically enter the sleep monitoring
mode; Automatically detect your times of deep sleep/shallow sleep/awake
throughout the night, and calculate your sleep quality; The watch end only
displays the total duration of deep sleep/shallow sleep/sleep, and the APP end
can view the details of sleep data.
Sleep data is available only when you wear a watch to sleep, and sleep
detection starts at 10 pm.
Voice Assistant
In the function menu, enter the voice assistant interface, and input voice
commands according to prompts. You can control your phone through the voice
assistant,
(Note: This function needs to be connected to the Bluetooth of the mobile
phone. If the Bluetooth is not connected, there will be no voice input
prompt.).
Calculator
Click the calculator icon in the function menu interface, enter the calculator, and you can use the watch calculator function.
weather
On the left side of the main interface, slide left to the main menu to enter
the weather interface, where the weather conditions and temperature of the day
are displayed, and you can view the weather conditions in the next few days.
( Note : This function needs to be connected to the mobile phone APP. If
not, there is no weather information).
Stopwatch function
In the function menu interface, click the stopwatch, click the Start button to start timing, click the Pause button to stop, and click the Reset button to clear the re timing.
Screen brightness adjustment
Find the display and brightness interface in the setting interface, enter the brightness adjustment interface, click””, “+” to manually adjust the screen brightness, which will affect the endurance
Screen out time adjustment
Find the display and brightness interface in the setting interface, enter the screen out time adjustment, slide up and down to select the screen out time, and click OK to complete the screen out time setting;
Respiratory training
In the function menu, enter the interface, click Start, and do breath out and breath in training with the vibration rhythm.
Music control
It is required to connect the mobile phone, and the function menu can enter the music control interface to control the functions of the mobile phone, such as music playing pause, switching songs, etc.
About this computer
Find Universal in the setting interface, click the About button, and enter to display the local Bluetooth name, Bluetooth MAC address, and TP firmware version.
Function introduction of APP end
Dial Market:
In this function, you can select the dial pushed on the mobile app, or edit
the picture on the mobile terminal and then push it to the bracelet. Massive
dials need to be downloaded on the mobile terminal before they can be pushed.
Call reminder:
In the connected state, if the incoming call reminder function is enabled, the
bracelet will vibrate when there is an incoming call.
Other reminders: (APP notification, sedentary, alarm clock, up to standard,
drinking water)
In the connected state, if this function is enabled, when there are WeChat,
QQ, Facebook and other messages, the watch will shake the reminder and display
the content received by the app. When other reminder functions are enabled,
the watch will shake the reminder.
Find Watch:
Click this function, the watch end will vibrate and the screen will light up.
Automatic heart rate detection:
After this function is turned on, the watch end will automatically detect the
heart rate, which will greatly reduce the life time of the bracelet.
Application market::
Built in application market, you can download and use more interesting
functions.
Smart beat function
When connected, enter the remote camera interface from the append. After
shaking, the mobile phone will automatically take photos. Before taking
photos, please allow the app to access the album to save the photos.
Tips for Android users: When using the reminder function, it needs to be set to allow “app” to run in the background; It is recommended to add “app” as trust in permission management and open all permissions.
Product parameters
- Product type : smart Watch
- Resolution : 412*412px
- Waterproof grade: I p68
- Display screen: 1.45 inch TFT screen
- Battery capacity: 270mah
- Synchronization mode: Bluetooth
- Packing list: host, watch strap and charging line, instructions
NOTE
- It should not be worn when taking a hot bath or swimming for a long time.
- Please connect the watch when synchronizing data.
- Use the self-contained charging cable to charge.
- Do not expose the watch to high moisture, high temperature or low temperature for a long time.
- The heart rate, blood oxygen and other data of this equipment a re only for reference, not for medical reference.
- The blood pressure test is affected by the external environment and personal skin color. The blood pressure monitoring is only used to monitor the changes of blood pressure, and can not really test or monitor the blood pressure of hypertensive patients. The test data cannot be used as medical data, and is only for reference
- Why can’t you push the incoming call information or content When the user turns on the QQ WeChat reminder switch for the first time, the app will get the corresponding permission. Check the program in the app to get the corresponding permission When 10S (incoming call, SMS, QQ, WeChat) reminder is turned on and off, the system will automatically pop up a pairing request, and the user only needs to select pairing.
- The final interpretation right belongs to the brand,
Description of restricted substances
Name and content identification of restricted substances or elements
parts name | Restricted use: no substance or element |
---|---|
lead | mercury |
watchcase | 0 |
Battery | 0 |
display | 0 |
PCB | X |
This table is woven according to the specification of St / T 11364.
0 :indicates that the content of the restricted materials in all materials of
the parts is below the limit specified in GBI T 26572-2011.o
x :It indicates that the content of the restricted substance in at least one
substance material of the component exceeds the limit specified in GBIT
26572-2011. (the enterprise can further explain the technical reasons for the
large “X” in the table according to the actual situation here.)
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.