qingping CGG1H Digital Thermometer Hygrometer Sensor Works Instructions
- June 9, 2024
- qingping
Table of Contents
qingping CGG1H Digital Thermometer Hygrometer Sensor Works
FAQ of Qingping Temp & RH Monitor H Version
Thank you for purchasing our product. Below are the solutions for some known problems
Cannot get historical data 1. with Qingping+
If after using the product for a few days, you still cannot get historical
data in the Qingping+ app, like this:
Please make sure that you have a home hub device (e.g., HomePod or HomePod mini, Apple TV 4th gen or newer) when you check the data remotely (the iPhone is not close to the product), or you have your iPhone and the Qingping Temp & RH Monitor H Version close to each other (e.g. within 15 feet or 5 meters).
If you have a hub device, or the iPhone is close to the product, this is how to solve the problem:
- Update the firmware of the product to the latest version (v3.0.5 or newer) with the Qingping+ app:
- The product needs to be close to the iPhone when updating its firmware, and the Qingping+ app should be newer than v2.0.5.After the firmware is updated, the Qingping+ app will remind you to delete the product and add it back again:
Please follow the below steps:
- Delete the product from Qingping+.
- Reset the product to its factory settings: press and hold the button on the back of the product, and release after the screen displays ”188”, wait for the product to return to display normal temperature and humidity readings, then the product is reset to factory settings.
- Add the product in Qingping+. After re-adding the product, it should work normally. If it’s not, please email us: at [email protected] (no “m” at the end).
Cannot connect 2. to the product
If Apple Home or Qingping+ app cannot connect to the product, and the iPhone
is already close to the product, it might be because you have reset the
product to its factory settings. Please delete the product from the app, and
add it back, then try again.
The product is not responding, even when its button is pressed
How to solve the problem
- Please change or reinstall the battery.
- Please check if the battery is installed properly:
After correctly re-installing the battery, the product should work normally. If it’s not, please email us: at [email protected] (no “m” at the end).
The readings on the app are different from those on the product’s display
The apps (both Qingping+ and Apple Home) fetch data less frequently from
the product than the readings change on the product’s display. You can update
the product’s firmware with Qingping+ to get a faster response — the product
will broadcast a change when the temperature change is larger than 0.5°, or
the relative humidity change is larger than 5%, if its firmware is newer than
v3.0.5, even when it’s not the time for the periodic broadcast.If you
encounter a problem when updating the firmware, please refer to problems No. 1
and 2 of this document.