qingping Air Monitor Lite User Manual

: July 3, 2024
: qingping

Table of Contents

Getting Started with the Qingping Air Monitor Lite
Specifications
Frequently Asked Questions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Air Monitor Lite
User Manual

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

Getting Started with the Qingping Air Monitor Lite

Charging

Take out the charging cable from the box.
Connect the cable to a 5V ⎓ 1A power adapter and plug it into a power socket.
Plug the other end of the charging cable into the USB-C charging port on the back of the device.
Ensure the ambient temperature does not exceed 40°C during charging.

Power On

Press and hold the power button on the back of the device until it powers on. Ensure the device has sufficient charge.
Interface
Tap or slide the concave bar on the top of the product to switch pages.
Turn Off the Screen / Power Off
Press the power button on the back of the product to turn off the screen.
Long press the power button on the back of the product to turn off the device.
Reset Network Settings
Press and hold the concave bar on the top of the product for at least 8 seconds until a large Wi-Fi icon appears on the screen.
Reset Factory Settings
Press and hold the concave bar on the top and the power button on the back of the product for at least 8 seconds until the product reboots.
Connect to “Home”
Open the Home app on your iOS or iPadOS device.
Tap the “+” icon, then select “Add or Scan Accessory.
Follow the instructions to add your Qingping Air Monitor Lite.

Note:

If you are unable to add the device, please reset the network settings of the device and try again. Please refer to “Reset Network Settings” in this manual.
To control the accessory through the Home app automatically or remotely, you need to set up your HomePod or Apple TV as a home hub. It is recommended to update to the latest software and operating system.

Connect to Mi Home / Xiaomi Home
This product works with the Mi Home / Xiaomi Home app*. Control your device and interact with it and other smart home devices using the Mi Home / Xiaomi Home app.

http://home.mi.com/do/index.html?model=cgllc.airm.cgdn1

Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is already installed. Alternatively, search for “Mi Home / Xiaomi Home” in the App Store to download and install it.
Open the Mi Home / Xiaomi Home app, log in to your account, tap the “+” icon in the upper right corner, and follow the prompts to add your device. Note: The app may have been updated, so please follow the instructions based on the current version of the app.
Note:

The app is referred to as the Xiaomi Home app in Europe (except for Russia). The name displayed on your device should be considered the default.
The product may not be supported by your region’s Mi Home / Xiaomi Home server. If you cannot find the product while adding it in the app, please change the server in the app settings to “Chinese mainland” and try again.
“Works with mijia” indicates that this product is designed to connect and interact with the Mi Home app or Mi AI. Please note that the product is certified only by the app interaction. Xiaomi and Mijia are not responsible for any product manufacturing, safety, regulatory standards, or quality supervision.

Connect to “Qingping+”
You can also use the mobile app “Qingping+” to connect your Qingping Air Monitor Lite. This app allows you to view readings, access historical data, upgrade the firmware, and more.
Visit qingping.co/plus or scan the QR code below to download the app:

https://qingping.co/apps/qingpingplus

Alternatively, you can search for “Qingping+” on the App Store or Google Play.
After installing the app, open it and add a device by selecting “Qingping Air Monitor Lite,” then follow the instructions provided by the app.
If you have already added your Qingping Air Monitor Lite in the Home app, it will automatically appear in the Qingping+ app, and there is no need to add it again.

Specifications

Model	CGDN1
Weight	143g
Size	63.6 × 46 × 54.6 mm
Screen Size	59.9 × 49.9 mm
Wi-Fi	802.11 b/g/n 2.4GHz
Bluetooth	Bluetooth 5.0
Temperature Measuring Range	0~40°C
Humidity Measuring Range	0~95% RH (non-condensing environment)
CO2 Measuring Range	400~9999 ppm
PM2.5/PM10 Measuring Range	0~500 µg/m³
Battery	2000mAh
Power Input	5V ⎓ 1A
Contain FCC ID	2AC7Z-ESP32WROVERB

Attention

Do not block the vent hole of the sensor.
This product is not waterproof or dustproof.
Do not use the product for extended periods in environments where humidity exceeds 90%.
Do not throw the battery or the product with the battery into fire to avoid the risk of explosion.
Do not disassemble the product yourself to prevent injury.

Frequently Asked Questions

Cannot add the product in the mobile app

E1 shows on the screen

The environment value exceeded the measurement range of the product.

E2 shows on the screen

The sensor is malfunctioning.

Unable to connect multiple smart home platforms at the same time

This product doesn't support connecting multiple smart home platforms simultaneously. If it's added to a smart home platform and you want to add it to another platform, please reset the device's network settings or reset it to factory settings first. Refer to the relevant content in this manual.

Performance Faults

When the product is charged correctly, but the screen does not display any content, or the displayed content is abnormal.When the specified app is correctly installed on the mobile phone, Bluetooth is on, and the distance between the mobile phone and the product is within the Bluetooth transmission range, but the app still cannot connect to the product.
The power button cannot be pressed down or does not bounce back after releasing.

Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity
This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and Directive 2011/65/EU amended (EU) 2015/863.
WEEE
This product must not be disposed of as normal household waste in accordance with the EU irective on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz