Shark ICZ362H Cordless Vacuum User Guide
- June 9, 2024
- Shark
Table of Contents
Shark ICZ362H Cordless Vacuum
WHAT’S INSIDE
- A. Handle & Hose
- B. Motorized Floor Nozzle
- C. Wand
- D. Pet Multi-Tool
- E. Crevice Tool
- F. Anti-Allergen Dusting Brush
- G. Li-lon Charger
- H. HEPA Post-Motor Filter (Pre-Installed)
ASSEMBLY
- Insert the Wand into the Floor Nozzle.
- Insert the Handie into the wand.
- Align the bottom of the Pod onto the rails on the neck of the floor nozzle. Slide the pod down the rails until it clicks into place.
- Connect the Hose to back of the pod, and attach the Hose Clip to the wand.
- Charge the Battery completely before first use. With the handle toward the back, insert the battery into the slot in the pod until it clicks into place.
For proper operation, ensure all connections ecurely clicked into place.
SUCTION POWER MODES
NOTE: The Lithium-lon Power Pack battery comes partially charged. Charge
fully before first use, then run the battery down until it is completely out
of power. This will condition the battery so the LED indicators will work
properly.
Full charge takes appraximately 3.5 hours.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>