MASSIMO ELECTRIC R01 7-Inch Automotive Head Units User Manual

June 9, 2024
MASSIMO ELECTRIC

MASSIMO ELECTRIC R01 7-Inch Automotive Head Units User Manual

MASSIMO ELECTRIC R01 7-Inch Automotive Head Units.jpg

The product concept

Product interface:

MASSIMO ELECTRIC R01 7-Inch Automotive Head Units.jpg

Product Instructions for Users

1. Instruction of the Main Interface

1.1 Users Register
In order to facilitate contacting with the driver, the system can actively provide some information to the driver when necessary.

After startup and after the automotive Head Unit connected, the registration interface will be displayed, as shown in the figure below.

FIG 1 Users Register.jpg

[Note] If the SIM card is not inserted into the car, the driver will be reminded to plug the SIM card when the screen is powered on. (The card insertion position is behind the screen)

1.2 Main Interface
After the Android screen is installed and the truck is ACC on, the Android screen will turn on automatically. After the boot is completed, the main interface will be displayed automatically, displaying vehicle related information, as shown in the figure below.

FIG 2 Main Interface.jpg

Vehicle information function:

FIG 3 Vehicle information function.JPG

FIG 4 Vehicle information function.JPG

  • vehicle speed is displayed on the left side;
  • display the vehicle speed and total mileage in the middle;
  • the oil level, battery voltage and water temperature are displayed on the right;
  • When an exception occurs, the corresponding area changes to red.

Navigation bar:

FIG 5 Navigation bar.JPG

FIG 6 Navigation bar.JPG

2. Instruction of Main Functions

2.1 The Bluetooth Music
Click the music icon ” ” in the bottom navigation bar to open the music APP. If Bluetooth is not currently connected, the interface will display as shown below.

FIG 7 The Bluetooth Music.jpg

Click “ Go Settings ” to pair and connect Bluetooth. Refer to Section 2.4.6. After the Bluetooth connection is successful, the interface will display as follows.

FIG 8 The Bluetooth Music.jpg

FIG 9 The Bluetooth Music.jpg

2.2 Video Monitoring

FIG 10 Video Monitoring.JPG

  • Front and rear camera monitoring screen switching: rear monitoring is displayed by default. Click the two buttons on the left to switch two viewing angles.
  • Click on the “Mirror Configuration” to display image camera images: horizontal mirror image, vertical mirror image, horizontal vertical image. Click on any camera area to display the camera image in full screen.

FIG 11 Video Monitoring.JPG

2.3 Notification Message

the bottom navigation bar, as shown below. The Settings menu includes the following options:
Registration, failure reporting, time setting, backlight setting, language setting, Bluetooth setting, language setting, Bluetooth setting, screensaver setting.

2.4.1 Register
In the process of using the vehicle, in order to facilitate contacting the supplier, some information will be registered, so that the supplier can find and locate the vehicle for various maintenance and maintenance.

FIG 13 Register.jpg

2.4.2 Failure Report
In the process of driving the vehicles, if the vehicle encounters faults, it will automatically report to the platform. At the same time, users can also submit faults to the platform and the platform management will carry out vehicle maintenance.

FIG 14 Failure Report.jpg

Click “Report History” to query your history.

FIG 15 Failure Report.jpg

2.4.3 Time Setting
The time setting interface is as follows. The date and time are automatically determined by default, or can be set manually.

You can set whether the time display mode adopts 24-hour system.

FIG 16 Failure Report.jpg

2.4.4 Backlight Setting
Backlight can be set to “automatic” or “manual” mode. The manual setting interface is shown in the figure below.

FIG 17 Backlight Setting.jpg

The automatic brightness is adjusted in preference to the current headlight state. If the headlights are on, it is considered to be night and the screen brightness is automatically lowered. If the headlights are off, it will be considered daytime and the screen brightness will be increased automatically. The user can set the brightness value of “light” and “dark” independently.

FIG 18 Backlight Setting.jpg

2.4.5 Language Setting
The device currently supports switching three languages: English, Spanish, and Chinese.

FIG 19 Language Setting.jpg

2.4.6 The Bluetooth Settings
Bluetooth function can be turned on / off; Check the Bluetooth name on the screen, which is convenient to find this Bluetooth on the mobile phone, and you can click to modify the name by yourself; The Bluetooth devices found and their connection are displayed below. The setting interface is as follows.

FIG 20 The Bluetooth Settings.jpg

2.4.7 System information
The system information interface is as follows, showing the device name, software version information, hardware version information, etc.

FIG 21 System information.jpg

2.4.8 Volume
Adjustable device volume.

FIG 22 Volume.jpg

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals