maxell MSS-MO1 Smart Motion Sensor User Manual
- June 9, 2024
- Maxell
Table of Contents
maxell MSS-MO1 Smart Motion Sensor
PRODUCT OVERVIEW
MSS-MO1 is a Wi-Fi based PIR sensor. You can check the device status, battery level, alarm record and even receive push notification via APP when it detects someone or animal moving within the detection range.
PRODUCT FEATURES
- Digital PIR sensor with low power consumption and strong anti-interference performance.
- Standard 2.4G wireless Wi-Fi communicaton technology, two methods for Wi-Fi inclusion, EZ and AP.
- 2 x CR123A batteries operated or USB powered.
- Compliant with CE, FCC and RoHS.
- Elegant design and flexible installation.
- Low battery alert and alarm push notficaton on APP.
- Immediate report when vibraton triggered.
RODUCT STRUCTURE
Definition of LED Indicator
| AP Mode | LED indicator blink slow in blue |
|---|---|
| EZ Mode | LED indicator blink fast in blue |
Button Instruction
In the network| Press and hold the Button for 5s then release, resume to
default settng, then it enters into EZ inclusion mode
---|---
Out of the network| Press and hold the Button for 5s then release to switch
EZ/AP
mode
Note
- In the network: Device has been included into the network.
- Out of the network: Device is in the status of default setting , never configured Wi-Fi
SPECIFICATIONS
| Power supply | 6V: 2*CR123A or 5V USB |
|---|---|
| Working current | 80mA |
| Standby current | 40uA |
| Battery capacity | 1300mAh |
| Detection distance | 10m |
| Detection angle | 120° |
| Sensitivity level | 8 |
| Wireless transmiting and receiving frequency | 2.4GHz—2.484GHz |
| Network protocol supported | IEEE802.11 b/g/n |
| Encryption type | WEP/TKIP/AES,WPS |
| Transmiting power | 802.11b: +17dBm@ 11Mbps |
802.11g: +15dBm@ 54Mbps
802.11n: +13dBm@ MCS7
Receiving sensitivity
| 802.11b: -91dBm@11Mbps 8%PER
802.11g: -75dBm@54Mbps 10%PER
802.11n: -72dBm@MCS7_HT20 10%PER
Working temperature| -10～+40℃
Storage temperature| -20～+60℃
Relative humidity| 8～80%RH
INSTALLATION
- Power on (battery or USB).
- Install the sensor’s holder in desired location with crews or 3M glue.
- Insert the multi-sensor into its holder.
DOWNLOAD APP
Scanning following QR codes to download APP for Android and IOS System
Start the APP and register an account with your email address then login APP with your account.
ADD DEVICES
Click ADD DEVICES -> Choose your DEVICE or Scan QR Code printed on DEVICE
.
Add the device to the network. In EZ mode or AP mode.
EZ Mode
Power on, the blue LED indicator will blink fast, then enter the EZ mode.click
the “Confirm indicator rapidly blink”, and input the Wi-Fi password, click
Confirm, it will show “connecting now”. Once it is connected successfully,
click done and return to the device main interface.
A P Mode
When it into EZ Mode, Press and hold the button for 5S time, the blue LED
indicator will blink slow, then enter the AP mode. Select AP Mode, click
“Confirm indicator slowly blink”, and input Wi-Fi password, click “Confirm”.
Open the smartphone Wi-Fi list, select SmartLife_XXXX, and get back when
connected successfully, it will show “Connecting now” then. Once it is
connected successfully, click done and return to the device main interface
.
Users can re-name or share the device after Wi-Fi connection is finished. Make sure the device is working in EZ/AP mode, if the APP works in EZ/AP mode.
DELETE DEVICES
8.1 Click “Remove Device” to remove this device from APP; click “Restore
manufacturer Defaults” to remove the device from APP and clear the history
record in cloud.
After remove device or Restore manufacturer defaults from the APP, repeating the WiFi network inclusion steps to include the device to a new WiFi network.
FCC NOTICE
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residental installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Maxell Corporation of America, 3 Garret Mountain Plaza, 3rd Floor, Suite #300, Woodland Park, NJ 07424. www.maxell-usa.com. Maxell Latin America, PH Oceanía Plaza – Torre 2000, Panama City, Rep. of Panama. www.maxell-latin.com Maxell Canada, 8500 Leslie Street, Suite 101, Markham Ontario, Canada L3T 7M8. www.maxellcanada.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>