GE Holiday 82154LO Cool Bright Blue LED Tape Light User Guide

GE Holiday 82154LO Cool Bright Blue LED Tape Light User Guide

THE GUIDELINE FOR LED TAPE LIGHT

MODEL:RTL-FPC-2835-2.5cm-19.6FT-120V-Ex-B

Item No: 82154LO

Made in Vietnam

120V, 60Hz, 0.106A

IMPORTANT SAFETY INSTRUCTIONS:

(a)  READ AND FOLLOW ALL SAFETY INSTRUCTIONS

• Do not cover this product as the covering may cause the flexible light to overheat and melt or
• Do not operate with the flexible light tightly coiled.
• Do not puncture, cut, shorten, or splice the flexible
• Do not route the cord or flexible lighting through walls, doors, windows or any like part of the building
• Do not use if there is any damage to the light or cord Inspect periodically.
• Do not submerge flexible light in liquids, or use the product in the vicinity of standing water or other
• Secure this flexible light using only the hangers or clips Do not secure this product or its cord with staples, nails, or like means that may damage the insulation or permanently attach to the building structure.
• Do not subject flexible lighting to continuous
• This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not alter or replace the plug.
• All units must be unplugged before adding additional
• Use only the same series extension segments model manufactured by the same manufacturer, .
• Ensure all connections and the end cap on the last segment is tightly secured to preclude the entry of
• Do not install on gates or doors, where subject to
• Do not mount or secure tape light in a manner that can cut the outer jacket or damage the cord insulation. Inspect the tape light carefully before use and discard any tape light that have broken outer jacket, loose connections, or frayed wire insulation.
• Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is
• Do not rub or knead the products continuously, the smallest bending radius is more than
• Do not operate with the flexible light tightly coiled. To prevent overheating do not allow contact between flexible light cables and parts of light cables. Maintain at least 12mm spacing between flexible light cables or parts of light
• Do not install in cabinets, tanks or enclosures of any

WARNING – Risk of fire and electric shock, uncoil flexible light prior to plugging into receptacle.

SAVE THESE INSTRUCTIONS

WARNING : When using “outdoor” use portable lighting products, basic safety

precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following:

READ ALL INSTRUCTIONS

• Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuits or outlet to be used for the outdoor use flexible lighting product. Receptacles are available having built-in GFCI protection for this measure of
• Use only outdoor extension cords, such as type SW, SOW, STW, STOW, SJW, SJOW, SJTW, or SJTOW. This designation is marked on the wire of the extension
• Do not install closer than 3 meters from a swimming pool

For questions and/or assistance, call customer service at

1-877-398-7337 or visit us on the web at www.geholidaylighting.com

PRINTED IN VIETNAM

NV 0422

MADE IN VIETNAM

©2022 Nicolas Holiday Ltd., 9F., No. 37, Guangfu N. Rd. Taipei, Taiwan

10560. All rights reserved.

HOW TO REPLACE THE FUSE:

This plug contains an electrical fuse a safety feature.

• Disconnect power before replacing the
• Grasp plug and remove from the receptacle or other outlet
• Do not unplug by pulling on the
• Slide open by unscrew the fuse access cover on top of attachment
• Remove old fuse
• Never attempt to replace the fuse with a higher watt Use only 5 A, 125 V fuse. Failure to do so may be a fire hazard.
• Set new fuse in holder and reinstall access
  

HOW TO INSTALL TAPE LIGHT

The design of tape light follows the principle of user-friendly and customized. User can install it in different smooth surface, such as wood, plastic, metal and porcelain, etc. It can be design an dapply in different shape, easy to connect
A. Face up lighting part when in stall clips.
B. Check all accessories are in properly installation before plug to electricity.
C. Bend only back , do not bend from side.
D. Fix mounting clips with nails or screws onto support surfaces. (Figure 1 2 3)
E. Mounting clips, suction cup should be evenly spaced and both be a maximum of 1 M apart.( Figure 4)
F. Make sure that the distance between two lines of lighting chains should be at least
The maximum connected quantity should refer to caution label
H. Please use the accessories (clips and screwfil_JNe provided Please do not cut this products.

For questions and/or assistance, call customer service at 1-877-398-7337 or visit us on the web at www.geholidaylighting.com
PRINTED IN MADE IN
©2022 Nicolas Holiday Ltd., 9F., No. 37, Guangfu N. Rd. Taipei, Taiwan 10560. All rights reserved.
VIETNAM NV 0422 VIETNAM

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>