better bathrooms Slotted Basin Waste User Manual

better bathrooms Slotted Basin Waste User Manual

Congratulations on your purchase

And welcome to our growing gang of savvy shoppers
We’re on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So,
you can fall in love with your space every single day.
As one of the UK’s largest independent bathroom stores, we’ve received countless awards; including the National Business Awards UK, the Digital Entrepreneur Awards and being placed on The Sunday Times Fast Track 100.
We hope your new product goes above and beyond your expectations. However, should any problems occur, please:

• log in to your account and contact our customer services team via your self-serve portal – betterbathrooms.com/CustomerAccount/Login
• contact us via betterbathrooms.com/content/contact-us

Important information

• Please read these instructions thoroughly and retain for future reference

• Installation must be carried out in compliance with The Water Fittings Regulations and Scottish Water Byelaws.

•  The system must be flushed prior to installation, else it might clog the filter and thefollowing phenomenon occurs: discharged water volume is small, or temperture cannot be controlled well.

• Pressures must be equal for optimum performance

• Please do not connect hot and cold water supply lines in reverse. This could result in hot water flowing from cold line and cause scalding.

• The feed-water temperature of water shall not exceed 85°C.
  Exceeding 85°may cause scalding, the service life of faucets might be shortened, or the faucet might be damaged.

• After installation, please make sure the faucet is securely mounted and checked for leaks.

Parts / Diagrams

| No| Part Description
---|---|---
1| Clicker dome
2| O-ring
3| Piston kit
4| Drain body
5| Rubber Washer
6| Rubber Washer
7| Plastic gasket
8| Locknut

Dimensions

Tools required

• Seal tape
• Spanner

Installation

Slotted/Unslotted Basin Waste

Note: Silicone sealant can be used.

• Unscrew the locknut(4) , and remove the plastic gasketr(3) and rubber washer(2).
• Insert the drain body(1) from above the basin. For the slotted basin waste, make sure the slot lines up with the overlfow on the
• Install the rubber washer(2), plastic gasket(3) and tighten with locknut(4)).
• To fill the basin, the Clicker mechanisam requires pressing down the clicker dome, and pressing it again to release the
• Check all the joints for.

Troubleshooting

•            Is the clicker dome(1) fully tighten

Water leak| •            Is there damage or dirt with the o-ring(2)

•            Is there damage or dirt with the rubber washers(5 or 6)

Maintenance and Cleaning

To maintain the surface of your product, wipe with a clean damp cloth and wipe dry, do not use any abrasive cleaning agents or materials.
If any harsh chemicals come into contact with the surface of the product, rinse and wipe clean immediately.

Read More About This Manual & Download PDF:

References

• Contact Us | Better Bathrooms
• Better Bathrooms - Login

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>