EZQuest X40021 USB-C CFast 2.0 Card Reader 5 Ports with UHS Mirco SD Instruction Manual
- June 6, 2024
- EZQuest
Table of Contents
STOP! If you have any issues with the product, please contact our technical support team before returning it.
TECHNICAL SUPPORT
Technical Support : 1 (800) 881 9305, 1 (714) 666 1716 X2
Email : support@ezq.com
Service Hours : Mon. – Fri. 08:00 AM – 05:00 PM P.S.T
Quick Instruction Manual for USB-C CFast 2.0 Card Reader 5 Ports with UHS II SD/Micro SD Part# X40021
How to Connect to Computer:
Connect the USB-C connector to your computer USB-C port and the rest of the cards that you need on your hub side.
Card Insertion:
: The Card needs to be facing up.
: The Card needs to be facing down.
Plug and Play with Fast Data Transfer Speeds
There is no need to install any drivers; just plug the adapter into your
computer and you are ready to go. Transfer images, videos, music and data from
your digital camera or other devices
Pro Grade CFast 2.0, UHS II SD and UHS II Micro SD Reader
The EZQuest 5-in-1 CFast 2.0 Reader is designed for photographers,
videographers or anyone who requires the fastest speeds available for CFast
2.0, SD and Micro SD cards including class UHS- II.
Simultaneous read and write over USB-C will allow you to move files at speeds up to 525MB/s on CFast 2.0 and up to 250MB/s on UHS- II.
Read and write data, images, and video directly from our 5-in-1 card reader to your USB-C computer. Card reader is compatible with any USB-C or Thunderbolt 3™ ready computers and comes with LED indicators for each port which light up when in use
How to connect to USB-C smart phone or tablet
Note: Please make sure that your device has the same type of USB-C connectors.
The best way is to compare your charging cable connector that comes with your
device to make sure it is a USB-C connector.
Please follow steps below:
A. Hook up your device USB-C power cable to X40021.
B. Connect any of your cards to the X40021.
C. Connect the USB-C connector to your smart phone or tablet.
D. Restart your smart device
The cable is long enough so the adapter can lay flat on your desk.
Power
Due to the power input limitations of mobile devices, this hub is not suitable for pass-through charging tablets including iPad Pro or phones (when using the original wall charger that came with iPad Pros or phones). To support full- speed charging for iPad Pro, please check your adapter supports 15V (45W).
Please email us with any questions or feedback you might have about our
products to
support@ezq.com.
1 (800) 881 9305
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>