AX TECHNOLOGIES NBSPKFLOAT-K03 Inflatable Floating Wireless Speaker User Guide
- June 9, 2024
- AX TECHNOLOGIES
Table of Contents
AX TECHNOLOGIES NBSPKFLOAT-K03 Inflatable Floating Wireless Speaker
Inflatable Floating Wireless Speaker
: Power on/off button USB : Micro Charging port
Series: NBSPKFLOAT-K03
NBSPKFLOAT-Q03
NBSPKFLOAT-V03
**USB**: Micro Charging port
Charging The Speaker
- Connect a Micro USB charging cable to the charging port on the Floating Speaker.
- Connect the USB end of the Micro USB cable to your USB port or an AC USB adapter
- When the speaker is charging, the LED indicator light located on the back of the speaker will turn on red.
- Once the speaker is fully charged, the LED indicator light will turn off.
Bluetooth Pairing
- Turn on the speakers by holding the power button until you hear an ascending audible tone,the Bluetooth LED light starts blinking.
- Navigate to the Bluetooth manager on your Bluetooth device.
- Search Bluetooth devices and select `Floating speaker’ to start connecting.
- Once paired, the Floating Speaker will beep and the Bluetooth LED light will turn solid blue.
USING YOUR SPEAKERS
Controll the speakes by using the main button Inflatable Floating Wireless Speaker LED LIGHT INDICATOR BLUE Light Inflatable Floating Wireless Speaker on the bottom of the speakers.
CHARGING Working Time: 2-3 Hours Charging Time: 1-2 Hours(Via Micro USB
Cable)
Note: When speakers in pairing mode, it will power off in 5 minutes later
after the speaker did not connected any devices.
LED LIGHT INDICATOR
Paring Mode: Flashing BLUE
Playing Music: Slow flashing BLUE
Charging via Micro Cable: RED LED Light
Device Connected: BLUE LED Light
Full Charged: No LED Light (Light Off)
Specifications
Product: Infatable Floating Wireless Speaker
Bluetooth Version: V5.0
Input: 5V/500Ma
Power Output : 3W
Battery Charging Time : 1-2 hours
Play Time: Up to 2-3 hours
Impedance: 4Ω3W
Rechargeable Battery: 3.7V/300mAh (Built-In)
REGULATORY NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec on against harmful interference in a residen al installa on. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc ons, may cause harmful interference to radio communica ons. However, there is no guarantee that interference will not occur in a par cular installa on. If this equipment does cause harmful interference to radio or television recep on, which can be determined by turning the equipment o and n, he u er is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separa on between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modi ca ons not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Opera on is subject to the
following two condi ons: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired opera on.
This equipment complies with FCC RF radia on exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be located or
operated in conjunct on with any other antenna or transmier.
FCC ID : 2AJXA-POOLSPEAKER
Documents / Resources
| AX
TECHNOLOGIES NBSPKFLOAT-K03 Inflatable Floating Wireless
Speaker
[pdf] User Guide
POOLSPEAKER, 2AJXA-POOLSPEAKER, 2AJXAPOOLSPEAKER, NBSPKFLOAT-K03,
NBSPKFLOAT-Q03, NBSPKFLOAT-V03, NBSPKFLOAT-K03 Inflatable Floating Wireless
Speaker, NBSPKFLOAT-K03, Inflatable Floating Wireless Speaker, Floating
Wireless Speaker, Wireless Speaker, Speaker
---|---