AX TECHNOLOGIES IJ301A Wireless Speaker User Guide
- October 30, 2023
- AX TECHNOLOGIES
Table of Contents
IJ301A Wireless Speaker
Product Information: Wireless Speaker
The Wireless Speaker comes in two series: IJ301A and IJ302A. It has an FCC ID of 2AJXA-BTSPK-1 and a wireless version of V5.3. The speaker has a working range of 10m and an impedance of 4. It has a maximum input power of 5W and a battery capacity of 500mAh Lithium. The speaker has a charging port type of Micro and a charging time of 2-3 hours via Micro Cable. The playtime is 3-4 hours.
Wireless Speaker
- RGB LED Light
- Speaker
- Lanyard
- Port Cover
- LED Indicator Light
- Micro USB Charging Input
- Power Switch
- LED Light
- Subwoofer
OPERATING INSTRUCTIONS
Charging the battery
Gently pull out the port cover (4) on the back of the speaker and rotate it
open. Plug the Micro USB end of the provided charging cable into the Micro USB
port (6) under the port cover (4) on the back of the Speaker. Plug the other
end into a compatible 5V wall charger or USB port. The Charging Indicator
Light (5) will turn on to indicate a successful connection, and turn off when
fully charged.
Wireless pairing
Once turned on the speaker will automatically enter Wireless pairing mode.
Open the Wireless menu on your smartphone or other wireless device and look
for “FunAmp” from the list of pairable devices. 0nce paired with a device it
will automatically connect next time it is turned on and the device is in
Wireless mode.
USING YOUR SPEAKER
Gently pull out the port cover (4) on the back of the speaker and rotate it open. Flip the Power Switch (7) underneath to the “ON” or “OFF” position.
Charging
- Working Time: 3-4 Hours
- Charging Time: 2-3 Hours (via Micro Cable)
LED LIGHT INDICATOR
- Pairing Mode: Flashing Blue Indicator
- Playing Music: Slow flashing Blue Indicator
- Charging via Micro Cable: Red LED Light Indicator
- Fully Charged: No LED Light Indicator (Light Off)
SPECIFICATIONS
- Product: Wireless Speaker
- Wireless Version: V5.3
- Working range: 10m
- Impedance: 4
- Maximum input power: 5W
- Battery capacity: 500mAh Lithium
- Play time: 3-4H
- Charging time: 2-3H
- Battery Type: 14500
- Charging Port Type: Micro
REGULATORY NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, he user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation on between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Opera on is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC RF radia on exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be located or
operated in conjunc on with any other antenna or transmier.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.