AX TECHNOLOGIES PUPSPEAKER Mini Bluetooth Speaker User Guide
- June 9, 2024
- AX TECHNOLOGIES
Table of Contents
Mini Bluetooth Speaker
QUICK START GUIDE
Mini Bluetooth Speaker
| ① Speaker | ② Indicator Light |
|---|---|
| ③ Microphone | ④ Main Button |
| ⑤ Strap Hole | ⑥ Micro Charging Port |
OPERATING INSTRUCTIONS
Charging the battery
- Insert the charging cable into the Micro USB input port, connect the USB plug into a USB power terminal ,the LED indicator will turn red.
- After charging is complete, the red LED indicator will turn off.
Bluetooth Pairing for Music/Phone Calls/Remote Camera
- Turn on the speaker by holding the Main Button for 3 seconds. The blue indicator will start flashing and a voice prompt will indicate that Bluetooth pairing is ready.
- Activate your phone or other device’s Bluetooth function.
- Search and connect to the Bluetooth speaker, named “Mini Pup”Once the two devices are connected, the LED indicator will remain blue and a voice prompt will indicate a successful connection.
Note: In addition to playing music, the Bluetooth speaker can be used to answer phone calls by clicking the Main Button.
USING YOUR SPEAKERS
Control the speaks by usi ng the main button on the bottom of the
speakers
Click: Play/Pause(Playing music) Answer/Hang up(In a phone call)
Capturing(Camera Mode)
Double Click: Redial last phone call
Long click for 3 seconds: Turn on/Turn Off
CHARGING
Working Time: 2-3 Hours
Charging Time: 1-2 Hours(Via Micro USB Cable)
Note: When speakers in pairing mode,it will power off in 5 minutes later
after the speaker did not connected any devices.
LED LIGHT INDICATOR
Pairing Mode: Flashing BLUE
Playing Music: Slow flashing BLUE
Charging via Micro Cable: RED LED Light
Device Connected: BLUE LED Light
Full Charged: No LED Light (Light Off)
Parameter of Speakers:
Product: Mini Bluetooth Speaker
Model: ITSPK34007-087
Bluetooth Version: V5.0
Input: 5V/500Ma
Power Output: 3W
Battery Charging Time: 1-2 hours
Play Time: 2-3 hours
Impedance: 4Ω3W
Rechargeable Battery: 3.7V/350mAh (Built-In)
REGULATORY NOTICE
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be located or
operated in conjunction with any other antenna or transmitter.
FCC ID : AJAX-PUP SPEAKER