Skullcandy PLYR Wireless Gaming Headphone User Manual
- June 9, 2024
- Skullcandy
Table of Contents
Skullcandy PLYR Wireless Gaming Headphone
Scan to get started. Balayez pour commencer
Scan 1D get started.
Blayze pour commencer.
Warranty intonation at:
skullcandy.com/warranty
Questions Visit: www.skullcandy.com
Americas
Skullcandy, Inc.
6301 N Landmark Dr.
Park City, UT 84098 U.S.A.
Skullcandy.comn
Canada
Skullcandy Canada ULC
329 Railway St. Unit 205
Vancouver, BC. V6A 1A4 Canada S
kullcandy.ca
Europe
Skullcandy Europe BV
Postbus 425
5500AK Veldhoven Nederland
Skullcandy.eu
Skullcandy UK LTD
Andrews House
College Road
Guildford GU1 4QB
Skullcandy.co.uk
Made in China
Speaker Driver: 5Omm,
Impedance: 34 Ohmns, THD<1%@1KHz, distance 1Omm in free filed 4%,
Frequency Band: 2402MHz-2480MHz,
Max Power: <10dEBm,
Weight: 314g.
- Skullcandy, and other marks are registered trademarks of Skullcandy, Inc. All rights reserved.
- Maximum operating emperature 45°C.
- Contains Li-ion battery. Battery must be recycled or disposed of properly.-
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED Compliance Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
ISED SAR Compliance Statement
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the head.
FCC SAR Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue.
CAUTION
Risk of explosion if the battery is replaced by an incorrect type; disposal of
a battery into fire or a hot oven, or mechanically crushing or cutting of a
battery, that can result in an explosion; leaving a battery in an extremely
high temperature Surrounding environment that can result in an explosion or
the leakage of flammable liquid or gas; a battery subjected to extremely low
air pressure that may result in an explosion or the leakage of flammable
liquid or gas.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Skull candy International GmbH declares that the radio equipment type
[Model: S6PPY| is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: skullcandy.eu/product-
documents
1 YEAR GLOBAL WARRANTY
Skull candy products a re backed by a 1-year warranty.
If it doesn’t work the way we promised, we’ll make it right. For claims,
questions, or Terms & Conditions: U.S. & Canada only:
visit Skullcandy.com/warranty or call
1-888-MYSKULL All other countries:
Visit Skulcandy.com/support/international-
support
Many electrical items can be repaired or recycled, saving natural resources and the environment. If you do not recycle, electrical equipment will end up in landfill where hazardous substances will leak Out and cause soil and water contamination – harming wildlife and also human health. To remind you that old electrical equipment can be recycled, it is now marked with a crossed out wheeled bin symbol. Please do not throw any electrical equipment (including those marked with the crossed out wheeled bin symbol) in your bin. Many Local Authorities will have containers that collect batteries for recycling. Public buildings and your workplace may also have containers. If you do not recycle, batteries will end up in landfill where hazardous substances will leak out and cause soil and water contamination – harming wildlife and also human health. Batteries containing hazardous materials such as mercury (Hg), cadmium (Ca) or lead (Pb) are marked with their chemical symbols as well. This symbol means that according to local laws and regulations the battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities or return to purchase location tor recycling or dispose.