MATTEO C65702 Baton 1-lt 3 Inch Pendant Instruction Manual

MATTEO C65702 Baton 1-lt 3 Inch Pendant

START FROM HERE

• Make sure power is completely off at the fuse box.
• Have your fixture installed by a qualified licensed electrician
• Prepare everything in clear area.
• Wear gloves at all times during this installation.
• Read the instructions carefully before you start assembly.
• Keep this instruction sheet for future reference.
• Technical Support:1-844-628-8368

Please Note:

• All Matteo Lighting fixtures come with a pre-wired module(s).
• Unless instructed to do so, please do not touch any part of the module(s) as any unnecessary contact with the module could cause permanent damage.

THIS LUMINAIRE MUST BE MOUNTED OR SUPPORTED IN A JUNCTION BOX CE LUMINAIRE DOIT ÊTRE MONTÉ OU SUPPORTÉ DANS UNE BOÎTE
DE JOHNSTON

OVERVIEW

1. Ensure main supply is switched off.
2. Fit the mounting bracket(1) onto the conjunction box with the machine screw(2).
3. Connect wires according to color (White to White, Black to Black). Connect all earth plug together onto the crossbar with a green screw to tight(3).
4. Hold the fixture and aim the hole on the canopy(4) at the screw on the mounting bracket, and fit the fixture onto the bracket with finials(5).
5. Unscrew metal part(6) to make the wire length adjustable.
6. Install the lamp (9) firmly into the lampholder(8)
7. Fit product (7) onto the fixture and screw up with reading (10).
8. Reconnect power.

www.matteolighting.com
Toll Free. 1.844.628.8368 E. [email protected]

References

• Matteo Lighting – Matteo Lighting

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>