MATTEO C78606 Odyssey Chandelier Installation Guide

MATTEO C78606 Odyssey Chandelier

INSTALLATION INSTRUCTIONS SHEET

START FROM HERE

• Make sure the power is completely off at the fuse box.
• Have your fixture installed by a qualified licensed electrician
• Prepare everything in a clear area.
• Wear gloves at all times during this installation.
• Read the instructions carefully before you start assembly.
• Keep this instruction sheet for future reference.
• Technical Support: 1-844-628-8368

Please Note:

• All Matteo Lighting fixtures come with a pre-wired module(s).
• Unless instructed to do so, please do not touch any part of the module(s) as any unnecessary contact with the module could cause permanent damage.

THIS LUMINAIRE MUST BE MOUNTED OR SUPPORTED IN A JUNCTION BOX

1. Ensure the main supply is switched off.
2. Fit mounting bracket (1) onto the mounting surface with self-tapping screws(2).
3. Connect wires (3) according to color (White to White, Black to Black). Connect all earth plugs together onto the crossbar with a green screw to tight.
4. Fit ceiling plate (4) onto the mounting bracket with nuts (5).
5. Make wire (7) across rods (6), canopy (4) in order, and screw all rods down.
6. Install the bulbs (8) (not included) firmly into lamp holders.
7. Reconnect power.

WARNING:
This fitting must be earthed. Disconnect power and allow fitting to cool down before cleaning or changing the lamp.

• www.matteolighting.com
• Toll Free. 1.844.628.8368
• E. info@matteolighting.com

References

• Matteo Lighting – Matteo Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>