MATTEO C69201 Diamant 1-Light Pendant Instruction Manual
- June 9, 2024
- MATTEO
Table of Contents
MATTEO C69201 Diamant 1-Light Pendant
START FROM HERE
- Make sure power is completely off at the fuse box.
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in clear area.
- Wear gloves at all times during this installation.
- Read instructions carefully before you start assembly.
- Keep this instruction sheet for future reference.
Technical Support:1-844-628-8368
Please Note
- All Matteo Lighting fixtures come with pre-wired module(s). ·
- Unless instructed to do so, please do not touch any part of the module(s) as any unnecessary contact with the module could cause permanent damage.
THIS LUMINAIRE MUST BE MOUNTED OR SUPPORTED IN A JUNCTION BOX CE LUMINAIRE DOIT ÊTRE MONTÉ OU SUPPORTÉ DANS UNE BOÎTE DE JONCTION
OVERVIEW
- Ensure main supply is switched off.
- Lock the loop(2) to the nipple(3) tightly.
- Install screws(S) through the mounting bracket(4), lock to the ceiling.
- Connect wires according to color (White to White, Black to Black). Connect all earth plug together onto the crossbar with green screw to tight.
- Clear wires, push the canopy(?) to the ceiling, lock the ring(S) on the collar(6) to attach the canopy tightly to the ceiling.
- Install blub(9) firmly into lamp holders (bulbs not provided).
- Reconnect power.
www.matteolighting.com
Toll Free. 1.844.628.8368
E. info@matteolighting.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>