MATTEO X72301 Maru Flush Mount Installation Guide

MATTEO X72301 Maru Flush Mount

START FROM HERE

• Make sure power is completely off at the fuse box. Have your fixture installed by a qualified licensed electrician
• Prepare everything in clear area.
• Wear gloves at all times during this installation.
• Read instructions carefully before you start assembly.
• Keep this instruction sheet for future reference. Technical Support:1-844-628-8368

Please Note:

• All Matteo Lighting fixtures come with pre-wired module(s).
• Unless instructed to do so, please do not touch any part of the module(s) as any unnecessary contact with the module could cause permanent damage.

THIS LUMINAIRE MUST BE MOUNTED OR SUPPORTED IN A JUNCTION BOX CE LUMINAIRE DOIT ÊTRE MONTÉ OU SUPPORTÉ DANS UNE BOÎTE
DE JONCTION

Mounting

1. Ensure main supply is switched off.
2. Fit mounting bracket(1) onto mounting surface with self-tapping screws(2).
3. Make wire(7) across rods(6), canopy(4) in order, and screw down all rods.
4. Connect wires(3) according to color (White to White, Black to Black). Connect all earth plug together onto the crossbar with green screw to tight.
5. Fit ceiling plate(4) onto mounting bracket with nuts(5).
6. Connect poles(6) and onto ceiling plate, the other end to lampholder.
7. Install the lamps(9) firmly into lampholders.
8. Fit lamp shade(10) into lamp holders with nuts(8).
9. Reconnect power.

References

• Matteo Lighting – Matteo Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>