MATTEO M12702CH Chrome Ceiling Mount Instruction Manual
- June 2, 2024
- MATTEO
Table of Contents
M12702CH/M12702BZ
INSTALLATION INSTRUCTIONS SHEET
START FROM HERE
- Make sure power is completely off at the fuse box.
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in clear area.
- Wear gloves at all times during this installation.
- Read instructions carefully before you start assembly.
- Keep this instruction sheet for future reference.
Technical Support: 1-844-628-8368
Please Note:
- All Matteo Lighting fixtures come with pre-wired module(s).
- Unless instructed to do so, please do not touch any part of the module(s) as any unnecessary contact with the module could cause permanent damage.
THIS LUMINAIRE MUST BE MOUNTED OR SUPPORTED IN A JUNCTION BOX
- Ensure main supply is switched o .
- Fit round mounting bracket onto junction box with machine screw (1).
- Connect wires according to color (White to White, Black to Black) (3). Connect all earth plug together onto the crossbar with green screw to ght.
- Fit ceiling plate onto mounting bracket with nut (2).
- If there’s gap between ceiling plate and top ceiling, Please use nut (4) and self-tapping (5) screw to double fix.
- Install the lamps (6) firmly into lampholders.
- Fix lampshade onto ceiling plate with flat screw (7).
- Reconnect power.
www.matteolighting.com
Toll Free. 1.844.628.8368
E. info@matteolighting.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>