TRAN LED VERS 02 Installation Guide

TRAN LED VERS 02

Wiring Details

STATIC WHITE (SW), STATIC WHITE HIGH EFFICACY (SW-HE), AND STATIC COLOR (SC)

SCREW FOR CONCEALED CLIP

CONCEALED CLIP INSTALL

1. Using the #4 x 5/8” flat head screws, mount the concealed clip. The first and last clip should be placed 4” inward from each end of the VERS.
2. Mount the VERS fixture by snapping onto the concealed clips.

ASSEMBLED

SCREW FOR MAGNETIC MOUNT ACCESSORY

MAGNET INSTALL

1. Using the #6 flat head screws, mount two screws into the 12” magnet bracket through the slotted holes at each end.
2. Unscrew the CLS VERS endcap using the supplied allen key, and slide in the magnet clips.
3. Using the supplied set screws fasten the CLS endcap that was removed, and secure the magnet clips into your desired location.
4. Drop the assembled VERS fixture into the mounted magnet bracket, the bracket should sit within the extrusion as pictured below.

NOTE: The magnet clips should be offset to the flat heads used to secure the bracket, to maximize magnetic connection.

NOTES: • Field modifications must comply with Q-Tran’s installation methods otherwise warranty is null and void

COVE INFO
The VERS magnet install requires a .925” cut out to be recessed
(The magnet bracket should be centered in the millwork).

NOTE: Height of millwork for recessed VERS should be based off the product specific dimensions found on the cutsheet.

NOTE: For magnet installations requiring seismic precautions, monofiliment may be used with magnet clip as pictured below.

References

• Your Name as Your Email | Hover Realnames
• LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>